Configure email settings email-settings
To start creating an email, you need to set up email channel configurations that define all the technical parameters required for your messages. Learn how to create configurations
Define the email settings in the dedicated section of the channel configuration, as detailed below.
The email configuration gets picked up for sending communications following the logic below:
-
For batch journeys, it does not apply to batch execution that had already started before the email surface configuration is made. The changes is picked up at the next recurrence or new execution.
-
For transactional messages, the change is picked up immediately for the next communication (up to five-minute delay).
Email type email-type
In the Email Type section, select the type of message for the configuration: Marketing or Transactional.
-
Select Marketing for promotional email, such as weekly promotions for a retail store. These messages require user consent.
-
Select Transactional for non-commercial email, such as order confirmation, password reset notifications, or delivery information for example. These emails can be sent to profiles who unsubscribed from marketing communications. These messages can only be sent in specific contexts.
When creating a message, you must choose a valid channel configuration matching the category you selected for your email.
Subdomain subdomains
Select the subdomain to use to send the emails.
To preserve the reputation of your domain, speed up the IP warming process and improve deliverability, delegate your sending subdomains to Adobe. Learn more
IP pool details ip-pools
Select the IP pool to associate with the configuration. Learn more
You cannot proceed with configuration creation while the selected IP pool is under edition (Processing status) and has never been associated with the selected subdomain. Otherwise, the oldest version of the IP pool/subdomain association will still be used. If this is the case, save the configuration as draft and retry once the IP pool has the Success status.
After an IP pool has been selected, PTR information is visible when hovering over the IP addresses displayed below the IP pool drop-down list. Learn more on PTR records
List Unsubscribe Header list-unsubscribe
Upon selecting a subdomain from the list, the Enable List-Unsubscribe option displays.
This option is enabled by default to include a one-click unsubscribe URL into the email header, such as:
If you disable this option, no one-click unsubscribe URL is displayed in the email header.
You can select the consent level from the Consent level drop down list. It can be specific to the channel or to the profile identity. Based on this setting, when a user unsubscribes using the list unsubscribe URL in the header of an email, the consent gets updated in Adobe Journey Optimizer either at the channel level or ID level.
The List Unsubscribe Header offers two features (Mailto and One-click unsubscribe URL, as explained below) which are enabled by default unless you uncheck one or both features:
-
A Mailto (unsubscribe) address, which is the destination address where unsubscribe requests are routed to for auto-processing.
In Journey Optimizer, the unsubscribe email address is the default Mailto (unsubscribe) address displayed in the channel configuration, based on your selected subdomain.
-
The One-click unsubscribe URL, which by default is the one-click opt our URL generated List Unsubscribe Header, based on the subdomain you set and configured in the Channel configuration Settings.
The Mailto (unsubscribe) feature and the One-click Unsubscribe URL feature are optional. If you do not want to use the default generated one-click unsubscribe URL, you can uncheck the feature. In the scenario where the Opt-out configuration option is toggled on and the One-click Unsubscribe URL feature is unchecked, if you add a one-click opt-out link to a message created using this configuration, the list unsubscribe header will pick up the one-click opt-out link you have inserted in the body of the email and use that as the one-click unsubscribe URL value.
Learn more on managing unsubscribe capabilities in your messages in this section.
Header parameters email-header
In the Header parameters section, enter the sender names and email addresses associated to the type of emails sent using that configuration.
-
Sender name: The name of the sender, such as your brand’s name.
-
Sender email: The email address you want to use for your communications.
-
Reply to (name): The name that will be used when the recipient clicks the Reply button in their email client software.
-
Reply to (email): The email address that will be used when the recipient clicks the Reply button in their email client software. Learn more
-
Error email: All errors generated by ISPs after a few days of mail being delivered (asynchronous bounces) are received on this address. The out-of-office notifications and challenge responses are also received on this address.
If you want to receive the out-of-office notifications and challenge responses on a specific email address that is not delegated to Adobe, you need to setup a forward process. In that case, make sure you have a manual or automated solution in place to process the emails landing into this inbox.
_, dot. and hyphen - characters.Reply to email reply-to-email
When defining the Reply to (email) address, you can specify any email address provided it is a valid address, in correct format and without any typo.
The inbox used for replies will receive all reply emails, except out-of-office notifications and challenge responses, which are received on the Error email address.
To ensure proper reply management, follow the recommendations below:
-
Ensure the dedicated inbox has enough reception capacity to receive all the reply emails that are sent using the email configuration. If the inbox returns bounces, some replies from your customers may not be received.
-
Replies must be processed keeping in mind privacy and compliance obligations as they may contain personally identifiable information (PII).
-
Do not mark messages as spam in the reply inbox, as it will impact all the other replies sent to this address.
Additionally, when defining the Reply to (email) address, make sure to use a subdomain that has a valid MX record configuration, otherwise the email configuration processing will fail.
If you get an error upon submitting the email configuration, it means that the MX record is not configured for the subdomain of the address you entered. Contact your administrator for configuring the corresponding MX record or use another address with a valid MX record configuration.
Forward email forward-email
To forward to a specific email address all emails received by Journey Optimizer for the delegated subdomain, contact Adobe Customer Care.
You need to provide:
- The forward email address of your choice. Note that the forward email address domain cannot match any subdomain delegated to Adobe.
- Your sandbox name.
- The configuration name or the subdomain for which the forward email address will be used.
The forward email address is set up by Adobe. This can take 3 to 4 days.
Once done, all messages received on the Reply to (email) and Error email adresses are forwarded to the specific email address you provided.
BCC email bcc-email
You can send an identical copy (or blind carbon copy) of emails sent by Journey Optimizer to a BCC inbox where they will be stored for compliance or archival purposes.
To do this, enable the BCC email optional feature at the channel configuration level. Learn more
Additionally, when defining the Bcc email address, make sure to use a subdomain that has a valid MX record configuration, otherwise the email configuration processing will fail.
If you get an error upon submitting the email configuration, it means that the MX record is not configured for the subdomain of the address you entered. Contact your administrator for configuring the corresponding MX record or use another address with a valid MX record configuration.
Sending to suppressed email addresses send-to-suppressed-email-addresses
In Journey Optimizer, all the email addresses that are marked as hard bounces, soft bounces, and spam complaints are automatically collected into the suppression list and excluded from sending in a journey or a campaign.
However, you can decide to go on sending messages of the transactional type to profiles even if their email addresses are on the suppression list due to spam complaint by the user.
Indeed, transactional messages generally contain useful and expected information, such as an order confirmation or a password reset notification. Therefore, even if they have reported one of your marketing messages as spam, most of the time you do want your customers to receive this type of non-commercial email.
To include email addresses suppressed due to spam complaint in your transactional message audience, select the corresponding option from the Send to suppressed email addresses section.
As a deliverability best practice, this option is disabled by default to ensure your customers who have opted out are not contacted. However, you may change this default option, which then permits you to send transactional messages to your customers.
Once this option is enabled, although a customer marked your marketing email as spam, such customer will be able to receive your transactional messages using the current configuration. Always make sure to manage opt-out preferences in accordance with deliverability best practices.
Seed list seed-list
A seed list in Journey Optimizer enables you to automatically include specific email seed addresses in your deliveries. Learn more
Select the list that is relevant to you in the Seed list section. Learn how to create a seed list in this section.
When the current configuration is used in a campaign or journey, the email addresses on the selected seed list are included at the delivery execution time, meaning they will receive a copy of the delivery for assurance purposes.
Learn how to use seed list in a campaign or a journey in this section.
Email retry parameters email-retry
You can configure the Email retry parameters.
By default, the retry time period is set to 84 hours, but you can adjust this setting to better suit your needs.
You must enter an integer value (in hours or minutes) within the following range:
- For marketing emails, the minimum retry period is 6 hours.
- For transactional emails, the minimum retry period is 10 minutes.
- For both email types, the maximum retry period is 84 hours (or 5040 minutes).
Learn more on retries in this section.
URL tracking url-tracking
You can use URL tracking parameters to measure the effectiveness of your marketing efforts across channels. This feature is optional.
The parameters defined in this section will be appended to the end of the URLs included in your email message content. You can then capture these parameters in web analytics tools such as Adobe Analytics or Google Analytics, and create various performance reports.
You can add up to 10 tracking parameters using the Add new parameter button.
To configure a URL tracking parameter, you can directly enter the desired values in the Name and Value fields.
You can also edit each Value field using the personalization editor. Click the edition icon to open the editor. From there, you can select the available contextual attributes and/or directly edit the text.
The following predefined values are available through the personalization editor:
-
Source action id: ID of the Email action added to the journey or campaign.
-
Source action name: name of the Email action added to the journey or campaign.
-
Source id: ID of the journey or campaign the email was sent with.
-
Source name: name of the journey or campaign the email was sent with.
-
Source version id: ID of the journey or campaign version the email was sent with.
-
Offer id: ID of the offer used in the email.
Below are examples of Adobe Analytics and Google Analytics compatible URLs.
-
Adobe Analytics compatible URL:
www.YourLandingURL.com?cid=email_AJO_{{context.system.source.id}}_image_{{context.system.source.name}} -
Google Analytics compatible URL:
www.YourLandingURL.com?utm_medium=email&utm_source=AJO&utm_campaign={{context.system.source.id}}&utm_content=image
You can dynamically preview the resulting tracking URL. Each time you add, edit or remove a parameter, the preview is automatically updated.
