DocumentationCampaignCampaign Classic v7 Documentation

The server configuration file the-server-configuration-file

Last update: Tue Jun 18 2024 00:00:00 GMT+0000 (Coordinated Universal Time)

The overall configuration of Adobe Campaign is defined in the serverConf.xml file, located in the conf directory of the installation directory. This section lists all the different nodes and parameters of the serverConf.xml file.

NOTE
Server-side configurations can only be performed by Adobe for deployments hosted by Adobe. To learn more about the different deployments, refer to the Hosting models section or to this page. The installation and configuration steps for hosted and hybrid models are presented in this section.

The first parameters are inside the shared node. These are related to the instance. They are potentially used by all the nlserver commands (nlserver web, nlserver wfserver, etc.). The other sections are related to a specific nlserver sub-command.

Shared parameters

Other parameters

authentication authentication

Here are the different parameters of the authentication node:

Parameter
Description
Type
Default value
checkIPConsistent
Enable IP address checking.
Boolean
false
defaultMode
Default identification mode.
String
'nl'
longSessionTimeOutSec
Timeout of long sessions in seconds.
Long
1296000
securityTimeOutSec
Security token timeout in seconds.
Long
86400
sessionCacheSec
Cache duration: cache of session information in seconds.
Long
600
sessionTimeOutSec
Session timeout in seconds.
Long
86400

XTK xtk

Here are the different parameters of the authentication > XTK node:

Parameter
Description
Type
Default value
internalPassword
Password of internal account.
String
internalSecurityZone
Internal account security zone: authorized zone for the internal account.
String
'lan'

dataStore datastore

Here are the different parameters of the dataStore node. This is where the server data sources are defined.

Parameter
Description
Type
Default value
exportDirectory
Export directory: path of destination directory for the exported data.
String
'$(XTK_INSTALL_DIR)/var/$(INSTANCE_NAME)/export/'
extraSandboxedDirectories
Extra sandboxed directories: other paths to be added in the sandbox (coma separated).
String
'/home/customers/,/sftp/'
formCacheTimeToLive
Form cache expiration delay: timeout in seconds after which a cache entry is invalidated. O means that cache entries are only refreshed at publication time.
Long
600
hosts
DNS masks: list of DNS masks that this instance serves (comma separated, can use * and ? patterns).
String
'*'
interactionCacheTimeToLive
Interaction JSSP cache expiration delay: timeout in seconds after which a cache entry is invalidated. A negative value means that the cache is always invalidated. '0', empty or invalid values are considered to be 60.
Long
300
lang
Instance language (enumeration). Possible values are 'fr_FR' (Français), 'en_GB' (English (UK)), 'en_US' (English (US)), 'de_DE' (Deutsch) and 'ja_JP' (Japanese).
String
'en_US'
uploadDirectory
Upload folder: path of destination directory for the uploaded data.
String
'$(XTK_INSTALL_DIR)/var/$(INSTANCE_NAME)/upload/'
uploadAllowlist
Authorized files to be downloaded separated by ','. The string must be a valid, regular java expression. See Limiting uploadable files.
String
'.+'
useVault
Store secrets in Vault: use Hashicorp Vault.
Boolean
false
vaultSecretPath
Secret path in Vault
String
'/v1/secret/campaign/'
vaultTokenPath
Local path of the file that contains the vault token. $(HOME) can be used in this path (but not other env variables).
String
'$(HOME)/.vaulttoken'
vaultUrl
Hashicorp Vault URL
String
viewCacheTimeToLive
Validity period of view cache: timeout in seconds after which a cache entry is invalidated. A negative value means that the cache is always invalidated. '0', empty or invalid values are considered to be 60.
Long
600
workingDirectory
XPath of the working directory.
String
workingDirectory : XPath of the working directory. Default: '$(XTK_INSTALL_DIR)/var/$(INSTANCE_NAME)/workspace/'

proxyAdjust proxyadjust

Here are the different parameters of the dataStore > proxyAdjust node. URLs matching the regular expression are regenerated based on the URL defined in urlBase.

Parameter
Description
Type
urlBase
Base to use when generating external URLs. Ex: https://server.domain.com
String
urlRegEx
Regular expression to match URLs. Ex: http://server\.lan\.net.*
String

dataSource datasource

Here are the different parameters of the dataStore > dataSource node.

Parameter
Description
Type
Default value
name
Data Source name
String
default

In the dataStore > dataSource > dbcnx node, configure the connection settings:

Parameter
Description
Type
Default value
NChar
Unicode storage
Boolean
dbSchema
Workspace
String
encrypted
Encrypted password
Boolean
login
Account
String
password
Password
String
provider
Type (enumeration). Possible values are 'Oracle', 'MSSQL' (Microsoft SQL Server), 'PostgreSQL' (PostgreSQL), 'Teradata', 'MySQL', 'Netezza', 'AsterData', 'SAPHANA' (SAP HANA), 'RedShift' (Amazon Redshift), 'ODBC' (ODBC (Sybase ASE, Sybase IQ)), 'Relay' (HTTP relay to remote database).
String
'Oracle'
server
Server
String
timezone
Time zone: see Time zone management.
String
unicodeData
Unicode data in the database
Boolean
useTimestampTZ
Date fields with time zone: see Time zone management.
Boolean

In the dataStore > dataSource > sqlParams node, configure the SQL parameters:

Parameter
Description
Type
funcPrefix
Function prefix
String

In the dataStore > dataSource > pool node, configure the parameters of associated connections pool:

Parameter
Description
Type
aliveTestDelaySec
Delay between connection validity checks.
Short
freeCnx
Number of free connection kept in the pool.
Short
maxCnx
Maximum number of allowed connections before refusing a new connection. See this technote.
Short
maxIdleDelaySec
Maximum idle time of connection. 0 means default value.
Short

virtualDir virtualdir

Here are the different parameters of the dataStore > virtualDir node. This is the configuration of the virtual directory to real directory mapping.

For additional information, refer to Managing public resources.

Parameter
Description
Type
name
Name of the virtual directory
String
path
Full path of the actual directory
String

Here is the default configuration:

<virtualDir name="images" path="$(XTK_INSTALL_DIR)/var/res/img/"/>
<virtualDir name="formCache" path="$(XTK_INSTALL_DIR)/var/$(INSTANCE_NAME)/formCache/"/>
<virtualDir name="publicFileRes" path="$(XTK_INSTALL_DIR)/var/res/$(INSTANCE_NAME)"/>

preprocessCommand preprocesscommand

Here are the different parameters of the dataStore > preprocessCommand node. These are the authorized commands for pre-processing of the ‘Load file’ workflow activity.

Parameter
Description
Type
command
Command line
String
label
Command line label
String
name
Command line name
String

Here is the default configuration:

<preprocessCommand command="" label="None" name="none"/>
<preprocessCommand command="zcat &quot;$fileName&quot;" label="Decompression" name="zcat"/><preprocessCommand command="gpg --decrypt &quot;$fileName&quot;" label="Decrypt" name="gpg"/>

dnsConfig dnsconfig

Here are the different parameters of the dnsConfig (DNS configuration) node.

For additional information, refer to this section.

Parameter
Description
Type
Default value
localDomain
Domain name: default domain name. Used by the SMTP HELO command. By default, uses the network parameters of the first network interface declared in Windows; or parses the file/etc/resolv.conf under Linux (domain or search entry).
String
nameServers
DNS server: comma separated list of domain name servers (DNS). See the note below.
String
retry
Number of retries for a DNS query.
Long
4
timeout
Timeout in milliseconds for a DNS query.
Long
5000
NOTE
Note on nameSevers: by default, uses the network
parameters of the first network interface declared in Windows
not defined in UNIX. Defines the domain name servers (DNS)
used by the MTA to get the Mail Exchanger declared for
a domain.
If this value is not defined, the MTA seeks this information in the host network configuration. If several DNS are possible, the different DNS addresses must be separated by a comma (example: 212.155.207.1,212.155.207.2). If your delivery server has several network interfaces, the DNS list used by the MTA is the first one. In this case, we recommend specifying the nameServer parameter to avoid any ambiguity.
CAUTION
If your network host configuration uses DHCP, the MTA will not find the DNS list provided by DHCP. In this case, we recommend specifying the DNS list in the network parameters of the Windows control panel.

exec exec

Here are the different parameters of the exec (command execution) node.

For additional information, refer to Restricting authorized external commands.

Parameter
Description
Type
blacklistFile
Path to the file containing the commands to add to the allowlist.
String
user
Execute commands as a different user.
String

htmlToPdf htmltopdf

Here are the different parameters of the htmlToPdf node. This is the configuration of the service for converting web pages into PDF documents.

Parameter
Description
Type
Default value
command
Command line for running the conversion (in 'other' mode).
String
maxProcessusCount
Max. number of conversion processes allowed at a time on one machine.
Long
5
mode
Tool to use for the conversion. Possible values are: phantomjs, wkhtmltopdf, other, disabled
String
'phantomjs'
timeout
Timeout for a conversion: maximum conversion time in seconds. Beyond this threshold, the conversion process is stopped and an error is raised.
Long
120
verbose
Verbose mode: start in verbose mode to diagnose possible errors.
Boolean
false
waitTime
Delay when waiting for a process: delay in seconds, when all processes are used at the same time and when waiting for a process to free up. If this delay is exceeded, conversion is stopped and an error is raised.
Long
15

Example for phantomjs:

phantomjs - -ignore-ssl-errors=true '$(XTK_INSTALL_DIR)/bin/htmlToPdf.js' '-out:{outPdf}' '-post:{postFile}' '-url:{originUrl}' -sessiontoken:{sessiontoken} -format:{format} -orientation:{orientation} -marginTop:{marginTop} -marginLeft:{marginLeft} -marginRight:{marginRight} -marginBottom:{marginBottom}

ims ims

Here are the different parameters of the ims node. This is the configuration for Campaign connecting to another service using IMS.

Parameter
Description
Type
Default value
authIMSClientId
Client ID
String
authIMSClientSecret
Secret key (encrypted in AES)
String
authIMSCode
Authorization code (encrypted in AES)
String
authIMSEndpoint
IMS server URL
String
'https://ims-na1.adobelogin.com'
authIMSTAClientId
Technical Account Client ID
String
authIMSTAClientSecret
Technical Account Secret key (encrypted in AES)
String
authIMSTAId
Technical Account ID
String
authIMSTAPrivateKey
Technical Account Private Key (encrypted in AES)
String

JavaScript javascript

Here are the different parameters of the javaScript node. This is the configuration of the JavaScript interpreter.

For additional information, refer to the Reporting documentation.

Parameter
Description
Type
Default value
maxMB
Maximum size in megabytes before running the garbage collector.
Long
512
stackSizeKB
Size of each stack chunk in kilo octets. This is a memory management tuning parameter which most users should not adjust.
Long
8

mailExchanger mailexchanger

Here are the different parameters of the mailExchanger node. This is the configuration of the SMTP server.

Parameter
Description
Type
Default value
mxAddress
SMTP server: IP address of SMTP server for the transfer of emails.
String
mxPort
TCP port of SMTP server used for the Email transfer.
String
25

module module

Here are the different parameters of the module node. This is the configuration for the namespaces restrictions module xtk.

Parameter
Description
Type
Default value
defaultNameSpace
Default namespace used when creating a new entity.
String
'cus'

monitoring monitoring

Here are the different parameters of the monitoring node. This is the monitoring service configuration.

Parameter
Description
Type
Default value
maxPreparationJobsSec
Maximum preparation time: duration in seconds after which a delivery action should no longer be in preparation.
Long
3600
unixScript
Unix script ran by the monitoring service.
String
winScript
Windows script to be executed by the monitoring service.
String

ooconv ooconv

Here are the different parameters of the ooconv node. This is the configuration of the document conversion server.

Parameter
Description
Type
Default value
maxConversions
Maximum number of conversions which an OpenOffice server is allowed to perform. Beyond this number, the server is restarted.
Long
1000
maxServerIdleSec
Maximum idle time of OpenOffice server before forced closing.
Long
7200
portRange
Interval of ports on which the OpenOffice servers are listening.
String
8101-8110
url
URL of the document conversion server.
String
'http://localhost:8080/nl/jsp/ooconv.jsp'

proxyConfig proxyconfig

Here are the different parameters of the proxyConfig node. This is the configuration of proxy parameters.

For additional information, refer to Proxy connection configuration.

Parameter
Description
Type
Default value
enabled
Use a proxy server.
Boolean
false
override
Exceptions: list of addresses for which proxy parameters shall be ignored.
String
'localhost*'
useSingleProxy
Unique proxy server: use the same configuration for all types of proxy.
Boolean
false

HTTP Proxy / Secure proxy http-proxy---secure-proxy-

In the proxyConfig > HTTP Proxy / Secure proxy node, configure the following parameters.

For additional information, refer to Proxy connection configuration.

Parameter
Description
Type
address
Address of proxy server
String
login
Login for the connection to proxy server
String
password
Password for the connection with proxy server
String
port
Proxy server port
Short

threadPool threadpool

Here are the different parameters of the threadPool node.

Parameter
Description
Type
Default value
maxThreadCount
Maximum number of threads in pool.
Long
10

urlPermission urlpermission

Here are the different parameters of the urlPermission node. This is the list of URLs that the Javascript code can access.

List of domains and regular expressions specifying whether a URL encountered in the Javascript code can or cannot be used by the Adobe Campaign server.

If the URL cannot be found, the default action is carried out, according to the default mode specified.

For additional information, refer to Outgoing connection protection.

Parameter
Description
Type
Default value
action
Default action if the URL is not in the authorized list (enumeration). Possible values are 'ignore' (authorize without warning message, this requires disabling the protection), 'warn' (authorize and issue a warning message) and 'deny' (prohibit access to the URL).
String
deny
debugTrace
Debugging trace of the URL selection mechanism: issues additional messages during the URL verification process.
Boolean
false

cusHeaders cusheaders

This node allows you to add specific headers in requests performed when uploading a file from an external server. Content Delivery Networks (CND) can ask for a specific header in order to trust the requester. These headers can be used to improve the trust on Campaign requests, particulary when downloading personalized documents for each recipient at delivery execution step. A high number of resource download requests can be interpreted as a DDos attack. dnsPattern allows you to to set specific header names and values for different CDNs based on their domain name.

  <!-- List of custom headers added to request.
         -->
    <cusHeaders>

    <!-- Pattern of DNS name or domain
         value :  dnsPattern: All or part of the URL's domain to verify, * is a wild card Default:  -->
      <dnsPattern value="">

    <!-- Header Name and Value
           headerName :  Header Name
           headerValue :  Header Value -->
        <headerDef headerName="" headerValue=""/>

      </dnsPattern>

    </cusHeaders>

url url

For each URL, add a url node with the following parameters:

For additional information, refer to Outgoing connection protection.

Parameter
Description
Type
dnsSuffix
Domain name, or domain parent, concerned by the URL: all or part of the URL's domain to verify, to accelerate the verification. The URL is only verified with respect to the regular expression if its domain contains dsnSuffix.
String
urlRegEx
Regular expression to refine validating URLs belonging to this domain: regular expression that the URL must verify, should it correspond to dnsSuffix.
String

If a record satisfies dnsSuffix but not urlRegEx, the following record is examined.

For example, to authorize access to all of the URLs of the domain business.com, we can define two records:

dnsSuffix=“business.com” urlRegEx=“http://.*”

and

dnsSuffix=“business.com” urlRegEx=“https://.*”

Here is the default configuration:

<url dnsSuffix="api.omniture.com" urlRegEx="https://api.omniture.com/genesis/i/3.1.*"   />
<url dnsSuffix="omniture.com" urlRegEx="https://api[1-5].omniture.com/genesis/i/3.1.*"  />
<url dnsSuffix="marketing.adobe.com"                     urlRegEx="https://.*"                                    />
<url dnsSuffix="fcm.googleapis.com"                      urlRegEx="https://fcm.googleapis.com/fcm/send.*"       />
<url dnsSuffix="graph.facebook.com"                      urlRegEx="https://.*"                                    />
<url dnsSuffix="api.line.me"                             urlRegEx="https://api.line.me/.*"                      />
<url dnsSuffix="api.twitter.com"                         urlRegEx="https://api.twitter.com/1.1.*"              />
<url dnsSuffix="adobeid-na1.services.adobe.com"          urlRegEx="https://.*"                                    />
<url dnsSuffix="adobeid-na1-stg1.services.adobe.com"     urlRegEx="https://.*"                                    />
<url dnsSuffix="localhost"                               urlRegEx="http://localhost:8080/nms/jsp/.*"              />
<url dnsSuffix="localhost"                               urlRegEx="http://localhost:8080/nl/jsp/.*"               />
<url dnsSuffix="localhost"                               urlRegEx="http://localhost:8080/xtk/jsp/.*"              />

xtkJobs xtkjobs

Here are the different parameters of the xtkJobs node. This is the configuration of the server jobs.

Parameter
Description
Type
Default value
purgeLogsPeriod
Memory status refresh period of server processing (in ms).
Long
500

archiving archiving

Here are the different parameters of the archiving node. This is the configuration of the executed archiving operations in the background.

For additional information, refer to Activating email archiving (on premise).

Parameter
Description
Type
Default value
acquireLimit
Number of EMLs to process at the same time
Long
100
archivingType
Archiving strategy of sent messages (enumeration). Possible values are '0' (no archiving) and '1' (transfers archiving of sent messages to a SMTP server).
Byte
0
args
Start-up parameters
String
autoStart
Automatic start
Boolean
false
compressBatchSize
Size of a compressed archive: max number of files in a compressed archive.
Long
10000
compressionFormat
Compression format used during archiving (enumeration). Possible values are '0' (no compression) and '1' (compress sent messages using zip format).
Byte
1
expirationDelay
Delay before automatic archiving of unprocessed emails: number of days before unprocessed emails are archived.
Long
2
initScript
ID of JavaScript to execute when starting the process.
String
maxProcessMemoryAlertMb
Memory consumption alert: alert concerning the amount of RAM consumed (in Mb) by a given process.
Long
1800
maxProcessMemoryWarningMb
Memory consumption warning: warning concerning the amount of RAM consumed (in Mb) by a given process.
Long
1600
pollDelay
Delay (in seconds) between each update event.
Long
60
processRestartTime
Time of the day when the process is automatically restarted. See Automatic process restart.
String
'06:00:00'
purgeArchivesDelay
Number of days before unprocessed emails are deleted.
Long
7
runLevel
Priority at start. Low priority modules are first started and last stopped. The syslogd module must therefore have the priority 0.
Short
10
smtpBccAddress
Archiving target destination
String
smtpEnableTLS
Activate SMTPS support: activates the delivery of emails in safe mode (STARTTLS/SMTPS) when supported by the remote server.
Boolean
false
smtpNbConnection
Number of connections to the archiving SMTP server.
Long
1
smtpRelayAddress
Comma-separated list of DNS names or IP addresses of SMTP relays to use.
String
smtpRelayPort
IP port of SMTP server.
Long
25

inMail inmail

Here are the different parameters of the inMail node. This is the configuration of the inbound Email management module.

Parameter
Description
Type
Default value
args
Start-up parameters
String
autoStart
Automatic start
Boolean
false
checkInstanceName
Verify instance name: if true, the name of the Adobe Campaign instance contained in the Message-ID headers must be the same as the current instance.
Boolean
true
defaultForwardAddress
Forwarding address: default email transfer address not processed by a rule.
String
false
errorForwardAddress
Address for errors: default address used to transfer invalid Emails (bad MIME encoding).
String
ignoreSize
Ignore message size: is used to ignore the size of a message returned by POP3 servers. In this case, the module expects a '.' at the end of the messages.
Boolean
false
inMailPeriodSec
Message reading period: message queue polling frequency.
Long
5
initScript
ID of JavaScript to execute when starting the process.
String
maxBroadLog
Maximum number of logs to update: defines the maximum number of log messages to keep in memory before updating the database.
Long
20
maxMsgPerSession
Maximum number of messages to read during POP3 session.
Long
200
maxProcessMemoryAlertMb
Memory consumption alert: alert concerning the amount of RAM consumed (in Mb) by a given process.
Long
1800
maxProcessMemoryWarningMb
Memory consumption warning: warning concerning the amount of RAM consumed (in Mb) by a given process.
Long
1600
maxSessionTTLSec
Session duration: maximum duration of message processing session.
Long
100
popMailPeriodSec
POP3 polling period
Long
300
popQueueSize
Queue size of read messages
Long
100
popTimeoutSec
Communication timeout with POP3 server.
Long
300
processRestartTime
Time of the day when the process is automatically restarted. See Automatic process restart.
String
'06:00:00'
reloadPeriodSec
Database reload frequency of accounts to be polled.
Long
600
runLevel
Priority at start. Low priority modules are first started and last stopped. The syslogd module must therefore have the priority 0.
Short
10

msgDump msgdump

In the inMail > msgDump node, configure the following parameters. This is the configuration of the dump of processed messages.

Parameter
Description
Type
Default value
dump
Save all inbound messages in text format.
Boolean
false
msgPath
Message dump path.
String
'/tmp/inMail'

interactiond interactiond

Here are the different parameters of the interactiond node. This is the configuration of the write daemon for inbound Interaction events.

For additional information, refer to Interaction - Data buffer.

Parameter
Description
Type
Default value
args
Start-up parameters
String
autoStart
Automatic start
Boolean
false
callDataSize
Max. number of characters stored in the shared memory for call data.
Long
0
initScript
ID of JavaScript to execute when starting the process
String
maxProcessMemoryAlertMb
Memory consumption alert: alert concerning the amount of RAM consumed (in Mb) by a given process.
Long
1800
maxProcessMemoryWarningMb
Memory consumption warning: warning concerning the amount of RAM consumed (in Mb) by a given process.
Long
1600
maxSharedEntries
Max. number of events stored in the shared memory.
Long
25000
nextOffersSize
Maximum number of eligible offers sorted right after propositions, to be stored for statistics.
Long
0
processRestartTime
Time of the day when the process is automatically restarted. See Automatic process restart.
String
'06:00:00'
runLevel
Priority at start. Low priority modules are first started and last stopped. The syslogd module must therefore have the priority 0.
Short
10
statsPeriod
Aggregation duration in seconds for the response time statistics. 0 means statistic storage was deactivated.
Long
600
targetKeySize
Max. number of characters stored in the shared memory for identifying individuals.
Long
16

mta mta

Here are the different parameters of the mta node. This is the configuration of delivery agents.

Parameter
Description
Type
Default value
args
Start-up parameters
String
'-tracefilter:nlmta'
autoStart
Automatic start
Boolean
false
dataLogPath
Save path of emails sent: if not empty, the path where all source files of sent emails will be saved.
String
debugPath
Dump directory:iIf not empty, copy MIME envelopes of sent mail messages in this directory. Used for trouble shooting.
String
dnsRequestLogDelayMs
DNS query logs delay: time in milliseconds to display the logs.
Long
errorPeriodSec
Error statistics frequency: time between generation of statistics and storage in the database.
Long
300
initScript
ID of JavaScript to execute when starting the process.
String
logEmailErrors
Generate error statistics and store them in the database.
Boolean
true
logLevel
Display level of log messages. Severity level of the logs written in the database. Log messages generated by the MTA are not all always written in the database. With this parameter, you can define the level from which you consider a message must be written in the database. If you define level 2, messages of level 1 and 0 are also written, whereas if you define level 1, only messages of level 1 and 0 are written. Possible values are: 0 (errors), 1 (warning), 2 (info)
Long
2
maxMemoryMb
Maximum memory size (in MB) that an mta process can use. Above this limit, the process is re-started so that the memory it uses is released to the system.
Long
1024
maxProcessMemoryAlertMb
Memory consumption alert: alert concerning the amount of RAM consumed (in Mb) by a given process.
Long
1800
maxProcessMemoryWarningMb
Memory consumption warning: warning concerning the amount of RAM consumed (in Mb) by a given process.
Long
1600
minConnectionsToLog
Connection threshold to take into account. Error statistics are not generated for a given path if the total number of connections for the period specified by errorPeriodSec is strictly lower than the threshold.
Long
100
minErrorsToLog
Error threshold to take into account: error statistics are not generated for a given path if the total number of errors for the period specified by errorPeriodSec is strictly lower than the threshold.
Long
1
minMessagesToLog
Message threshold to take into account. Error statistics are not generated for a given path if the total number of messages sent for the period specified by errorPeriodSec is strictly lower than the threshold.
Long
1000
notifRelay
Notification relay: HostName:Port used to relay notifications.
String
processRestartTime
Time of the day when the process is automatically restarted. See Automatic process restart.
String
'06:00:00'
purgeDataLogDelay
Delay before archived emails are deleted: number of days before archived emails in the directory specified in dataLogPath are purged.
Long
15
retryLostMessages
Retry lost messages: parts of deliveries will be retried if the child process is dead.
Boolean
true
runLevel
Priority at start. Low priority modules are first started and last stopped. The syslogd module must therefore have the priority 0.
Short
10
signEmailLinks
Enable the signature mechanism. This improves security on tracking links in email.
Boolean
true
statServerAddress
Address of the delivery statistics server, given as <dns or ip> [: <port> ]. See Coordinates of the statistics server.
String
If not defined, the default port is 7777.
statServerTLSSupport
Enable TLS by domain: enables the TLS configurable by MX (requires an up-to-date statistics server).
Boolean
true
useMomentum
If set to "true", your instance is using the Enhanced MTA.
Boolean
verifyMode
Verification mode: activates the verify mode (no physical transmission of messages; used for simulation and tests).
Boolean
false
workingPath
Working directory: location of temporary files used by the MTA to communicate with its child processes.
String
'$(XTK_INSTALL_DIR)/var/$(INSTANCE_NAME)/mta/'
xMailer
X-Mailer field: value of field 'X-Mailer' in SMTP mail header.
String
'nlserver, Build $(PRODUCT_VERSION)'

cache cache

In the cache node, configure the following parameters. This is the local file cache configuration.

Parameter
Description
Type
Default value
maxPeriodSec
Recycled after: period, expressed in seconds, after which the file is automatically deleted from the cache to reclaim storage.
Long
244800
maxSizeOnDiskMb
Maximum cache size (Mb).
Long
1024
purgePeriodSec
Purge frequency: period in seconds between executions of the cache purge mechanism.
Long
3600

relay relay

In the mta > relay node, configure the following parameters. This is the configuration of the mail server for the message delivery.

The list will be handled in the same way as a list of MX returned by a MX DNS query, usually the first MX is used as long as it is available, then the next one is used, and so on.

For additional information, refer to SMTP relay.

Parameter
Description
Type
Default value
address
Comma-separated list of DNS names or IP addresses of SMTP relays to use.
String
port
IP port of SMTP server.
Long
25

master master

In the mta > master node, configure the following parameters. This is the configuration of the main server.

For additional information, refer to this section.

Parameter
Description
Type
Default value
dataBasePoolPeriodSec
Database polling frequency of the jobs to be delivered. This value indicates the database polling frequency (in seconds). To obtain the list of jobs waiting for delivery, the MTA polls the database on a regular basis. When there is no job waiting, the polling period is defined by this value. Otherwise if a job has been transferred to a child server, then this polling duration is automatically reduced to one second so that a new job can be processed again as soon as possible, i.e. as soon as a child server is available again. This does not mean that database query will be done every second until a child server is available again. In fact, a database access is only done when at least one child server becomes available.
Long
30
dataBaseRetryDelaySec
Waiting period after a database connection failure. A database connection failure is usually caused by the database server itself. The server may also be stopped for maintenance purposes, for example. The DataBaseRetryDelay parameter defines the duration between two connection attempts in case of a database connection failure.
Long
60
domainKeysReloadPeriodSec
Validity period for the cache of private keys (DomainKeys). Private keys used to sign emails following the DomainKeys recommendation (http://antispam.yahoo.com/domainkeys) are stored as options in the database. The domainKeysReloadPeriodSec parameter defines how many seconds the MTA can keep these keys in a cache. After this delay, all keys must be reloaded from the database.
Long
600
maxSpareServers
Maximum number of child servers. Represents the maximum number of servers running. It is recommended to limit this number at an optimum compatible with the server memory resources. This can be checked during a delivery. The used memory should not exceed a third of a the physical memory available otherwise the swap will be used. See MTA child processes.
Long
2
minSpareServers
Minimum number of child servers. The MTA tries to keep at least this number of servers running. If there are less, it restarts new servers every second until this value is reached.
Long
0
startSpareServers
Number of child server at start-up. The number of child servers is dynamically monitored; when the MTA starts, it creates as many child servers as indicated by this value. Normally, child servers cannot be started faster than one server per second in order to save host resources. However, when the MTA starts, this limitation is overruled so that child servers are available as soon as possible.
Long
0

child child

In the mta > child node, configure the following parameters. This is the configuration of child servers.

For additional information, refer to Email sending optimization.

Parameter
Description
Type
Default value
extraArgs
Optional command line arguments
String
idleChildTimeoutSec
Timeout until idle child servers are stopped. If a child server has an idle time greater than this parameter, it will automatically kill itself to free up host resources.
Long
60
maxAgeSec
Maximum message retention time. If a prepared message could not be sent because of throttling or was not able to connect to the target MTA, the message is abandoned and will be processed at the next retry.
Long
600
maxGCMConnectPerChild
Maximum of parallel Http requests to the FCM initiated by each child server.
Long
8
maxMsgPerChild
Maximum count of messages per child server. Each MTA child processes this number of messages and dies. It is important to specify a number such that memory or resource leaks in the MTA are harmless (typically a few thousands). Even if there are no known memory leaks in the MTA code, the embedded JavaScript and XSL engines are not fully reliable.
Long
5000000
maxWaitingMessages
Pending messages: maximum number of messages waiting in memory to be delivered.
Long
2000
maxWorkingSetMb
Maximum memory size (in MB) that a child process can use. Above this limit, the process is stopped so that the memory it uses is released to the system.
Long
128
soapConnectorTimeoutSec
Timeout (in seconds) after which a SOAP connection for a delivery connector is abandoned.
Long
600
startWithFirstMX
Always start with the highest priority MX.
Boolean
false
timeToLive
Maximum number of consecutive attempts when resumed.
Long
48

In the mta > child > smtp node, configure the following parameters. This is the configuration of SMTP sessions.

Parameter
Description
Type
Default value
enableTLS
Activates the delivery of emails in safe mode (STARTTLS/SMTPS) when supported by the remote server.
Boolean
false
idleSessionTimeoutSec
Idle session timeout. This parameter is only used if the session is reused for transmitting several messages to a given domain. When the MTA has completed the message transmission, the SMTP session it has used is not systematically closed. If a message is ready to be sent for this same domain then the same SMTP session will be reused and this is why the session is not automatically closed. The parameter IdleSessionTimeout parameter lets you define the time during which an SMTP session can remain active waiting for another message. Once the duration has elapsed, the session is automatically closed.
Long
5
initialDelaySec
Initial delay before retrying connection. This delay is doubled each time connection fails.
Long
4
maxSessionsPerChild
Maximum number of SMTP sessions by child server. To deliver a message, the MTA initializes an SMTP connection with the recipient MTA. The maximum number of concurrent and active SMTP sessions for a given child server is limited by this value. If you multiply this value by maxSpareServers, you get the maximum number of messages that can be concurrently processed by a given child server.
Long
1000

In the mta > child > smtp > IPAffinity node, configure the following parameters. This is the configuration of the management of affinities with IP addresses for optimized outgoing SMTP traffic.

For additional information, refer to List of IP addresses to use and Managing outbound SMTP traffic with affinities.

Parameter
Description
Type
localDomain
Domain name: local domain name linked to the IP address. Used when issuing an SMTP HELO command.
String
name
Logical name: names linked to the affinity by users. Names are separated using semicolons;
String

In the mta > child > smtp > IP node, configure the following parameters.

For additional information, refer to List of IP addresses to use.

Parameter
Description
Type
address
Associated physical address. Eg: '192.168.0.1'
String
publicId
Associated public address ID. Used as a key for the statistics server. Must be numeric. See this section.
Long
weight
Specifies the frequency of use for this IP, relative to other IPs (bigger weights lead to higher frequencies).
Long
includeDomains
Comma separated list of domain masks to include.
String
excludeDomains
Comma separated list of domain masks to exclude.
String
heloHost
Computer name linked to the IP address. Used when issuing an SMTP HELO command.
String

nmac nmac

Here are the different parameters of the nmac node. This is the configuration of for push notification deliveries.

Parameter
Description
Type
Default value
useHTTPProxy
Use HTTP proxy defined in shared/proxyHTTP.
Boolean
false

relay relay-1

Here are the different parameters of the nmac > relay node. This configures the use of a relay for the message delivery (ios http2 connector).

Parameter
Description
Type
Default value
address
DNS address or name of the relay to use.
String
port
Relay port
Long
443
trustedCertsChain
Certificate chain (PEM file). Useful when using a mock server.
String

pipelined pipelined

Here are the different parameters of the pipelined node. This is the configuration of the event processing module for Pipeline Services.

Parameter
Description
Type
Default value
appName
Name of the application generated in the Developer connection when the public key is saved.
String
args
Start-up parameters
String
authGatewayEndpoint
URL to obtain a gateway token.
String
'https://api.omniture.com'
authPrivateKey
Private key to obtain tokens (encrypted in AES with the XtkKey option).
String
autoStart
Automatic start
Boolean
false
disableAuth
Disable authentication: connect to Pipeline Services without authentication.
Boolean
2
discoverPipelineEndpoint
URL to discover the Pipeline Services URL.
String
'https://producer-pipeline-pnw.adobe.net'
dumpStatePeriodSec
Status save period: frequency that the process's internal information is saved in a file. Inactive if 0.
Long
0
forcedPipelineEndpoint
Listening URL: force the listening URL of the Pipeline Services.
String
initScript
ID of JavaScript to execute when starting the process.
String
maxProcessMemoryAlertMb
Memory consumption alert: alert concerning the amount of RAM consumed (in Mb) by a given process.
Long
1800
maxProcessMemoryWarningMb
Memory consumption warning: warning concerning the amount of RAM consumed (in Mb) by a given process.
Long
1600
monitorServerPort
Status server port: HTTP server port allowing you to query the status of the process. Inactive if 0.
Long
7781
pointerFlushMessageCount
The pointer will be stored in the database every time that this number of messages are processed.
1000
pointerFlushPeriodSec
Delay before the pointer is stored: the pointer will be stored in the database at least once during this period (useful in case of low activity).
Long
5
processRestartTime
Time of the day when the process is automatically restarted. See Automatic process restart.
String
'06:00:00'
processingJSThreads
Number of threads for event processing with a personalized JavaScript connector.
Long
4
processingThreads
Number of threads for event processing.
Long
4
retryPeriodSec
Delay between processing if there is a failure.
Long
30
retryValiditySec
Abandon after this period: abandon the event if the processing is still failing after this period.
Long
300
runLevel
Priority at start. Low priority modules are first started and last stopped. The syslogd module must therefore have the priority 0.
Short
10

repair repair

Here are the different parameters of the repair node. This is the configuration of the database repair module.

Parameter
Description
Type
Default value
repairActionDelayMin
Delivery actions repair module: delay (in minutes) after which delivery actions can be processed by the repair module.
Long
60

securityZone securityzone

Here are the different parameters of the securityZone node.

For additional information, refer to Define security zones.

Parameter
Description
Type
Default value
allowDebug
Authorize debug mode for Web applications.
Boolean
false
allowEmptyPassword
Authorize the user to use the application without a password.
Boolean
false
allowHTTP
Authorize the use of HTTP for operator logon.
Boolean
false
allowSQLInjection
Authorize the use of SQLDATA in expressions.
Boolean
false
allowUserPassword
Authorize user/password session tokens.
Boolean
false
label
Label
String
NewLabel()
name
Internal name
String
NewName()
sessionTokenOnly
Do not use the security token.
Boolean
false
showErrors
Display error details
Boolean
false

Here is the default configuration:

<securityZone allowDebug="false" allowHTTP="false" allowSQLInjection="false" label="Public Network" name="public">
  <subNetwork name="all" label="All addresses" mask="*" proxy="127.0.0.1, ::1"/>

  <securityZone allowDebug="true" allowHTTP="false" allowSQLInjection="false" label="Private Network (VPN)"
                name="vpn" showErrors="true">

    <securityZone allowDebug="true" allowEmptyPassword="false" allowHTTP="true" allowUserPassword="false"
                  allowSQLInjection="false" label="Private Network (LAN)" name="lan" sessionTokenOnly="true"
                  showErrors="true">
      <subNetwork name="lan1" label="Lan 1" mask="192.168.0.0/16" proxy="127.0.0.1, ::1"/>
      <subNetwork name="lan2" label="Lan 2" mask="172.16.0.0/12" proxy="127.0.0.1, ::1"/>
      <subNetwork name="lan3" label="Lan 3" mask="10.0.0.0/8" proxy="127.0.0.1, ::1"/>
      <subNetwork name="localhost" label="Localhost" mask="127.0.0.0/8" proxy="127.0.0.1, ::1"/>
      <subNetwork name="lan6"  label="Lan (IPv6)" mask="fc00::/7" proxy="127.0.0.1, ::1"/>
      <subNetwork name="lan6b" label="Lan (IPv6)" mask="fe80::/10" proxy="127.0.0.1, ::1"/>
      <subNetwork name="localhost6" label="Localhost (IPv6)" mask="::1/128" proxy="127.0.0.1, ::1"/>
    </securityZone>

  </securityZone>
</securityZone>

subNetwork subnetwork

Here are the different parameters of the securityZone > subNetwork node.

For additional information, refer to Define security zones.

Parameter
Description
Type
Default value
label
Label
String
NewLabel()
mask
Mask or address
String
name
Internal name
String
NewName()
proxy
Mask or address of (reverse) proxy used by this sub-network to access the instance. In this case, the 'X-Forwarded-For' header will be tested instead of this proxy.
String
127.0.0.1

sms sms

Here are the different parameters of the sms node. This is the configuration of the inbound SMS management module.

Parameter
Description
Type
Default value
args
Start-up parameters
String
autoStart
Automatic start
Boolean
false
dataRetentionDays
Maximum number of days files working files kept by the SMPP connector.
Long
60
dataSizeMo
Maximum size in MB of the SMPP working files.
Long
512
initScript
ID of JavaScript to execute when starting the process.
String
keepAlivePeriod
Recurrence of the session continuity frame: max. period in seconds between two frames for notifying that the receiving session is still enabled.
Long
25
maxProcessMemoryAlertMb
Memory consumption alert: alert concerning the amount of RAM consumed (in Mb) by a given process.
Long
1800
maxProcessMemoryWarningMb
Memory consumption warning: warning concerning the amount of RAM consumed (in Mb) by a given process.
Long
1600
pollPeriod
Search frequency: SMS account poll period.
Long
300
processRestartTime
Time of the day when the process is automatically restarted. See Automatic process restart.
String
'06:00:00'
reloadPeriod
Account reload frequency: database reload frequency of accounts to be polled.
Long
600
runLevel
Priority at start. Low priority modules are first started and last stopped. The syslogd module must therefore have the priority 0.
Short
10
srReadDelay
Number of seconds late for SR processing: only SRs with a recovery date earlier than the current time minus the duration in seconds given by srReadDelay.
Long
600
timeout
Communication timeout with SMS gateway.
Long
300

netsize netsize

Here are the different parameters of the sms > netsize node.

Parameter
Description
Type
Default value
netsizeConnectionTimeout
Timeout in seconds when establishing a connection with Netsize.
Long
30

stat stat

Here are the different parameters of the stat node. This is the configuration of the MTA statistics module.

Parameter
Description
Type
Default value
args
Start-up parameters
String
autoStart
Automatic start
Boolean
false
initScript
ID of JavaScript to execute when starting the process.
String
maxProcessMemoryAlertMb
Memory consumption alert: alert concerning the amount of RAM consumed (in Mb) by a given process.
Long
1800
maxProcessMemoryWarningMb
Memory consumption warning: warning concerning the amount of RAM consumed (in Mb) by a given process.
Long
1600
port
Server listening port. See this section.
Short
processRestartTime
Time of the day when the process is automatically restarted. See Automatic process restart.
String
'06:00:00'
runLevel
Priority at start. Low priority modules are first started and last stopped. The syslogd module must therefore have the priority 0.
Short
10

syslogd syslogd

Here are the different parameters of the syslogd node. This is the configuration of the Log management module.

Parameter
Description
Type
Default value
args
Start-up parameters
String
autoStart
Automatic start
Boolean
false
initScript
ID of JavaScript to execute when starting the process.
String
maxFileSizeMb
Maximum size in Mb for a log file.
Long
10
maxNumberOfLoginsFiles
Maximum number of logins.log files to keep.
Long
365
maxProcessMemoryAlertMb
Memory consumption alert: alert concerning the amount of RAM consumed (in Mb) by a given process.
Long
1800
maxProcessMemoryWarningMb
Memory consumption warning: warning concerning the amount of RAM consumed (in Mb) by a given process.
Long
1600
processRestartTime
Time of the day when the process is automatically restarted. See Automatic process restart.
String
'06:00:00'
runLevel
Priority at start. Low priority modules are first started and last stopped. The syslogd module must therefore have the priority 0.
Short
10

tracking tracking

Here are the different parameters of the tracking node. This is the configuration of the tracking server.

Parameter
Description
Type
Default value
args
Start-up parameters
String
autoStart
Automatic start
Boolean
false
blockRedirectForUnsignedTrackingLink
Disable malformed URLs generated from previous builds.
Boolean
false
consolidationPeriodSec
Consolidation period
Long
300
dedupOpenPeriodMin
Deduplicate openings: remove duplicate open tracking logs to limit the effects of mail previews in mail readers like Outlook.
Long
1
errorIgnorePercent
Ignore up to X% of errors: do not update tracking indicators as long as the ratio of journals not already taken into account does not reach this value.
Byte
1
errorIgnorePeriod
Update error indicators: maximum duration before error indicators are recomputed.
Long
86400
indicatorsDuration
Compute indicators during: duration after the validity date of a delivery after which consolidated indicators are no longer computed.
Long
2592000
initScript
ID of JavaScript to execute when starting the process
String
logCountPerRequest
Number of logs requested by call to the remote tracking server.
Long
1000
maxProcessMemoryAlertMb
Memory consumption alert: alert concerning the amount of RAM consumed (in Mb) by a given process.
Long
1800
maxProcessMemoryWarningMb
Memory consumption warning: warning concerning the amount of RAM consumed (in Mb) by a given process.
Long
1600
phishbowlServiceAPIKey
API key for the Phishbowl Service Endpoint Integration. This protects redirection of malformed URLs generated from older builds.
Long
phishbowlServiceEndpoint
Endpoint for the Phishbowl Service Endpoint Integration. This protects redirection of malformed URLs generated from older builds.
Long
processRestartTime
Time of the day when the process is automatically restarted. See Automatic process restart.
String
'06:00:00'
runLevel
Priority at start. Low priority modules are first started and last stopped. The syslogd module must therefore have the priority 0.
Short
10
trackingIgnorePercent
Ignore up to X% of tracking: do not update tracking indicators as long as the ratio of journals not already taken into account does not reach this value.
Byte
1
trackingIgnorePeriod
Update tracking indicators: maximum duration before tracking indicators are recomputed.
Long
86400
userAgentCacheSize
Size of browser identifier cache.
Long
500

trackinglogd trackinglogd

Here are the different parameters of the trackinglogd node. This is the configuration of the tracking log writing daemon.

Parameter
Description
Type
Default value
args
Start-up parameters
String
autoStart
Automatic start
Boolean
false
initScript
ID of JavaScript to execute when starting the process
String
maxCreateFileRetry
Max writing retries: maximum number of files that can be created in case of writing failure in log files.
Long
5
maxLogsSizeOnDiskMb
Maximum log size: maximum space used by logs on disk (in MB). May not be less than 100 MB.
Long
500
maxProcessMemoryAlertMb
Memory consumption alert: alert concerning the amount of RAM consumed (in Mb) by a given process.
Long
1800
maxProcessMemoryWarningMb
Memory consumption warning: warning concerning the amount of RAM consumed (in Mb) by a given process.
Long
1600
maxSharedLogs
Maximum log count: maximum number of logs stored in shared memory. Cannot be less than 10000.
Long
25000
processRestartTime
Time of the day when the process is automatically restarted. See Automatic process restart.
String
'06:00:00'
purgeLogsPeriod
Number of logs before purge: number of logs inserted before starting the purge of log files. May not be lower than 50000.
Long
50000
runLevel
Priority at start. Low priority modules are first started and last stopped. The syslogd module must therefore have the priority 0.
Short
10
webTrackingParamSize
Maximum number of characters saved in shared memory for extra web tracking parameters.
Long
64

web web

Here are the different parameters of the web node. This is the configuration of the Web Module.

For additional information, refer to this section.

Parameter
Description
Type
Default value
JVMOptions
Options of the JVM passed as a string.
String
MaxThreads
Maximum number of threads.
Long
75
MinSpareThreads
Minimum number of threads.
Long
5
args
Start-up parameters
String
autoStart
Automatic start
Boolean
false
controlPort
Tomcat listening control port: refer to Configure Tomcat.
Short
8005
httpPort
Tomcat HTTP listening port: refer to Configure Tomcat.
Short
8080
initScript
ID of JavaScript to execute when starting the process.
String
maxDeliveryQueueSize
Size of the queue for SubmitDelivery calls: maximum number of SubmitDelivery SOAP calls that can be queued.
Long
50
maxProcessMemoryAlertMb
Memory consumption alert: alert concerning the amount of RAM consumed (in Mb) by a given process.
Long
1800
maxProcessMemoryWarningMb
Memory consumption warning: warning concerning the amount of RAM consumed (in Mb) by a given process
Long
1600
notifRelay
Notification relay: HostName:Port enabling relay of notifications.
String
processRestartTime
Time of the day when the process is automatically restarted. See Automatic process restart.
String
'06:00:00'
runLevel
Priority at start. Low priority modules are first started and last stopped. The syslogd module must therefore have the priority 0.
Short
10
startSoapRouterInModule
Start the SOAP router in module mode.
Boolean
false

jsp jsp

Here are the different parameters of the web > jsp node. This is the configuration of the parameters used by the JSPs.

Parameter
Description
Type
Default value
debug
Execution of JSP in debug mode or not.
Boolean
downloadPath
Download folder: download path of installation programs for the client consoles.
String
'$(XTK_INSTALL_DIR)/datakit/nl/eng/jsp'
foFileName
Path of .fo file.
String
soapRouter
URL of SOAP router (http://myserver/xxx, http://jni or mailto:xxx).
String
'http://jni'

The web > jsp > classpath node contains the list of all class paths to use when starting JVM. Here is the default configuration:

'$(XTK_INSTALL_DIR)/tomcat-X/bin/bootstrap.jar
          $(XTK_INSTALL_DIR)/tomcat-X/bin/tomcat-juli.jar
          $(XTK_INSTALL_DIR)/tomcat-X/lib/tomcat-coyote.jar
          $(XTK_INSTALL_DIR)/tomcat-X/lib/tomcat-util.jar
          $(XTK_INSTALL_DIR)/tomcat-X/lib/tomcat-api.jar
          $(XTK_INSTALL_DIR)/tomcat-X/lib/servlet-api.jar
          $(XTK_INSTALL_DIR)/tomcat-X/lib/jsp-api.jar
          $(XTK_INSTALL_DIR)/tomcat-X/lib/el-api.jar
          $(XTK_INSTALL_DIR)/tomcat-X/lib/annotations-api.jar
          $(XTK_INSTALL_DIR)/tomcat-X/lib/catalina.jar
          $(XTK_INSTALL_DIR)/tomcat-X/lib/websocket-api.jar
          $(XTK_INSTALL_DIR)/tomcat-X/lib/tomcat7-websocket.jar
          $(XTK_INSTALL_DIR)/java/lib/pdfbox-2.0.4.jar
          $(XTK_INSTALL_DIR)/java/lib/FontBox-0.1.0.jar
          $(XTK_INSTALL_DIR)/java/lib/AGJavaEndpoint.22.jar
          $(XTK_INSTALL_DIR)/java/lib/NSGConstants.jar
          $(XTK_INSTALL_DIR)/java/lib/smpp.jar
          $(XTK_INSTALL_DIR)/java/lib/nlweb.jar
          $(XTK_INSTALL_DIR)/java/lib/jcaptcha-all.jar
          $(XTK_INSTALL_DIR)/java/lib/apns-1.0.0.Beta6-jar-with-dependencies.jar
          $(XTK_INSTALL_DIR)/java/lib/commons-collections-3.2.2.jar
          $(XTK_INSTALL_DIR)/java/lib/jcommon-1.0.16.jar
          $(XTK_INSTALL_DIR)/java/lib/jfreechart-1.0.13.jar
          $(XTK_INSTALL_DIR)/java/lib/barcode4j-light.jar
          $(XTK_INSTALL_DIR)/java/lib/zxing.jar
          $(XTK_INSTALL_DIR)/java/lib/raztec.jar
          $(XTK_INSTALL_DIR)/java/lib/gson-2.7.jar
          $(XTK_INSTALL_DIR)/java/lib/alpn-api-1.1.3.v20160715.jar
          $(XTK_INSTALL_DIR)/java/lib/netty-all-4.1.6.Final.jar
          $(XTK_INSTALL_DIR)/java/lib/netty-tcnative-boringssl-static-1.1.33.Fork22.jar
          $(XTK_INSTALL_DIR)/java/lib/pushy-0.8.1.jar
          $(XTK_INSTALL_DIR)/java/lib/slf4j-api-1.7.21.jar
          $(XTK_INSTALL_DIR)/java/lib/slf4j-simple-1.7.21.jar'

jssp jssp

Here are the different parameters of the web > jssp node. This is the configuration of the parameters used by the JSSPs.

Parameter
Description
Type
Default value
collectsGarbageAfterRequest
Enables the garbage collector of the JavaScript context after each query.
Boolean
true
timeToLive
Maximum number of pages served by a JavaScript context.
Long
1000

The web > jsp > classpath node contains the list of all class paths to use when starting JVM.

relay relay-2

Here are the different parameters of the web > relay node. This is the configuration of the relay for HTTP requests between two zones.

For additional information, refer to this section.

Parameter
Description
Type
Default value
debugRelay
Start the HTTP relay module within the Web server in debug mode.
Boolean
false
forbiddenCharsInAuthority
Forbidden character(s) (Domain): list of forbidden characters in the 'authority' section of a URI.
String
'.?#@/:'
forbiddenCharsInPath
Forbidden character(s) (Path): list of forbidden characters in the 'path' section of a URI.
String
'?#/'
modDir
Value of the 'mod_dir' module option: list of files to be used during a query on a folder.
String
'index.md'
startRelay
Start the HTTP relay module.
Boolean
false
startRelayInModule
Start the HTTP relay module within the Web server.
Boolean
true
timeout
Wait time before deleting banned url.
String
'60'

Add a web > relay > url node for each URL to relay (insert order defines priority) with the following parameters.

For additional information, refer to Dynamic page security and relays and section.

Parameter
Description
Type
Default value
IPMask
Authorized IPs: comma separated list of source IP addresses allowed to use the relay for this mask.
String
deny
Deny access to these URLs (return an HTTP 403 error)
Boolean
hostMask
DNS alias to relay: comma separated list of DNS alias masks to relay (ex: '*.adobe.com').
String
httpAllowed
HTTP access authorized no matter what the security zone (like webApps).
Boolean
relayHost
Add original host: use the HTTP 'Host' header of the original request when relaying.
Boolean
relayPath
Add initial URL path: append the complete path of the URLs to relay to the URL of the target page.
Boolean
status
Synchronization status of a public resource (enumeration). Possible values are 'normal' (normal execution), 'blacklist' (url added to denylist in case of error 404) and 'spare' (file upload on spare server if existing).
String
normal
targetUrl
URL of the target page: refer to Configure Tomcat.
String
timeout
Maximum execution time (in seconds) of the request being relayed.
Long
urlPath
Mask of URLs to relay (ex: '/nl*', '*.jsp').
String

Here is the default configuration:

<url IPMask="" deny="" hostMask="" relayHost="true" relayPath="true"
     status="normal" targetUrl="http://localhost:7781" timeout="" urlPath="/pipelined/*"/>
<url IPMask="" deny="" hostMask="" relayHost="true" relayPath="true" targetUrl="http://localhost:8080"
     timeout="" status="normal" httpAllowed="false" urlPath="/view/*"/>
<url IPMask="" deny="true" hostMask="" relayHost="true" relayPath="true" targetUrl="http://localhost:8080"
     timeout="" status="normal" httpAllowed="false" urlPath="*ooconv.jsp*"/>
<url IPMask="" deny="true" hostMask="" relayHost="true" relayPath="true" targetUrl="http://localhost:8080"
     timeout="" status="normal" httpAllowed="false" urlPath="/res/*.jsp*"/>
<url IPMask="" deny="" hostMask="" relayHost="true" relayPath="true" targetUrl="http://localhost:8080"
     timeout="" status="normal" httpAllowed="true" urlPath="*/sc.jssp"/>
<url IPMask="" deny="" hostMask="" relayHost="true" relayPath="true" targetUrl="http://localhost:8080"
     timeout="" status="normal" httpAllowed="true" urlPath="*/interactionProposal.jssp"/>
<url IPMask="" deny="" hostMask="" relayHost="true" relayPath="true" targetUrl="http://localhost:8080"
     timeout="" status="normal" httpAllowed="true" urlPath="*/zoneJson.jssp"/>
<url IPMask="" deny="" hostMask="" relayHost="true" relayPath="true" targetUrl="http://localhost:8080"
     timeout="" status="normal" httpAllowed="true" urlPath="/nms/jsp/barcode.jsp"/>
<url IPMask="" deny="" hostMask="" relayHost="true" relayPath="true" targetUrl="http://localhost:8080"
     timeout="" status="normal" httpAllowed="true" urlPath="/nms/jsp/captcha.jsp"/>
<url IPMask="" deny="" hostMask="" relayHost="true" relayPath="true" targetUrl="http://localhost:8080"
     timeout="" status="normal" httpAllowed="true" urlPath="/nms/jsp/webForm.jsp"/>
<url IPMask="" deny="" hostMask="" relayHost="true" relayPath="true" targetUrl="http://localhost:8080"
     timeout="" status="normal" httpAllowed="true" urlPath="/xtk/jsp/zoneinfo.jsp"/>
<url IPMask="" deny="" hostMask="" relayHost="true" relayPath="true" targetUrl="http://localhost:8080"
     timeout="" status="normal" httpAllowed="true" urlPath="*/facebookCallback.jssp"/>
<url IPMask="" deny="" hostMask="" relayHost="true" relayPath="true" targetUrl="http://localhost:8080"
     timeout="" status="normal" httpAllowed="true" urlPath="/nl/jsp/m.jsp"/>
<url IPMask="" deny="" hostMask="" relayHost="true" relayPath="true" targetUrl="http://localhost:8080"
     timeout="" status="normal" httpAllowed="true" urlPath="/nl/jsp/s.jsp"/>

<url IPMask="" deny="" hostMask="" relayHost="true" relayPath="true" targetUrl="http://localhost:8080"
     timeout="" status="blacklist" httpAllowed="false" urlPath="/nms/jsp/*.jsp"/>
<url IPMask="" deny="" hostMask="" relayHost="true" relayPath="true" targetUrl="http://localhost:8080"
     timeout="" status="blacklist" httpAllowed="false" urlPath="/xtk/jsp/*.jsp"/>
<url IPMask="" deny="" hostMask="" relayHost="true" relayPath="true" targetUrl="http://localhost:8080"
     timeout="" status="blacklist" httpAllowed="false" urlPath="/nl/jsp/*.jsp"/>
<url IPMask="" deny="" hostMask="" relayHost="true" relayPath="true" targetUrl="http://localhost:8080"
     timeout="" status="blacklist" httpAllowed="false" urlPath="*.jssp"/>
<url IPMask="" deny="" hostMask="" relayHost="true" relayPath="true" targetUrl="http://localhost:8080"
     timeout="" status="blacklist" httpAllowed="true" urlPath="/webApp/*"/>
<url IPMask="" deny="" hostMask="" relayHost="true" relayPath="true" targetUrl="http://localhost:8080"
     timeout="" status="blacklist" httpAllowed="false" urlPath="/report/*"/>
<url IPMask="" deny="" hostMask="" relayHost="true" relayPath="true" targetUrl="http://localhost:8080"
     timeout="" status="blacklist" httpAllowed="false" urlPath="/jssp/*"/>
<url IPMask="" deny="" hostMask="" relayHost="true" relayPath="true" targetUrl="http://localhost:8080"
     timeout="" status="normal" httpAllowed="false" urlPath="/strings/*"/>
<url IPMask="" deny="" hostMask="" relayHost="true" relayPath="true" targetUrl="http://localhost:8080"
     timeout="" status="normal" httpAllowed="true" urlPath="/interaction/*"/>
<url IPMask="" deny="" hostMask="" relayHost="true" relayPath="true" targetUrl="http://localhost:8080"
     timeout="" status="normal" httpAllowed="true" urlPath="/barcode/*"/>
<url IPMask="" deny="" hostMask="" relayHost="true" relayPath="true" targetUrl="http://localhost:8080"
     timeout="" status="normal" httpAllowed="true" urlPath="/lineImage/*"/>

<url IPMask="" deny="" hostMask="" relayHost="false" relayPath="false" targetUrl=""
     timeout="" status="spare" httpAllowed="true" urlPath="/favicon.*"/>
<url IPMask="" deny="" hostMask="" relayHost="false" relayPath="false" targetUrl=""
     timeout="" status="spare" httpAllowed="true" urlPath="/*.md"/>
<url IPMask="" deny="" hostMask="" relayHost="false" relayPath="false" targetUrl=""
     timeout="" status="spare" httpAllowed="true" urlPath="/*.png"/>
<url IPMask="" deny="" hostMask="" relayHost="false" relayPath="false" targetUrl=""
     timeout="" status="spare" httpAllowed="true" urlPath="/*.jpg"/>

Add a web > relay > responseHeader node for each HTTP header to add to replies forwarded to the relay.

For additional information, refer to Managing HTTP headers.

Parameter
Description
Type
name
Header name
String
value
Header value
String

Here is the default configuration:

<responseHeader name="X-XSS-Protection" value="1; mode=block"/>

redirection redirection

Here are the different parameters of the web > redirection node. This is the configuration of the redirection module.

For additional information, refer to this section.

Parameter
Description
Type
Default value
IMSOrgId
Organization ID: unique organization identifier within the Adobe Experience Cloud, used in particular for the VisitorID service and the IMS SSO.
String
P3PCompactPolicy
Value describing the policy used for permanent cookies (compliant with the P3P Compact Policy format).
String
'CAO DSP COR CURa DEVa TAIa OUR BUS IND UNI COM NAV'
cookieDomain
Comma separated list of domains to be configured to explicitly indicate your domain to set cookie.
String
databaseId
Database identifier associated with the tracking instance.
String
defLogCount
Log count by call: number of logs returned by default upon a call of method GetTrackingLogs.
Long
30
expirationURL
Page for expired redirections: URL of Web page used by default by the redirection server when redirection for a delivery action has expired.
String
maxJobsInCache
Maximum job count: maximum number of delivery actions in cache. May not be lower than 50.
Long
100
showSourceIP
When set to false, the value of sourceIP in the response returned by r/test is an empty string.
Boolean
true
startRedirection
Start the redirection service.
Boolean
true
startRedirectionInModule
Start the redirection service in module mode.
Boolean
true
trackWebVisitors
Web tracking: creation of logs for the pages visited by unknown users.
Boolean
false
trackingPassword
Password used by the redirection server.
String

Here are the different parameters of the web > redirection > spareServer node.

For additional information, refer to Redundant tracking.

Parameter
Description
Type
Default value
enabledIf
Taken into account if: the tracking server is taken into account if the expression returns true.
String
id
Name
String
1
url
Extra redirection server URL
String

spamCheck spamcheck

Here are the different parameters of the web > spamCheck node. This is the configuration the Email anti-spam scoring evaluation parameters.

For additional information, refer to Configuring SpamAssassin.

Parameter
Description
Type
command
Command to execute to evaluate the anti-spam score of an email (e.g. 'perl spamcheck.pl').
String

wfserver wfserver

Here are the different parameters of the wfserver node. This is the workflow process configuration.

For additional information, refer to High availability workflows and affinities.

Parameter
Description
Type
Default value
affinity
Affinity
String
args
Start-up parameters
String
autoStart
Automatic start
Boolean
false
dataBasePoolPeriodSec
Period
Long
20
initScript
ID of JavaScript to execute when starting the process.
String
maxProcessMemoryAlertMb
Memory consumption alert: alert concerning the amount of RAM consumed (in Mb) by a given process.
Long
1800
maxProcessMemoryWarningMb
Memory consumption warning: warning concerning the amount of RAM consumed (in Mb) by a given process.
Long
1600
notifRelay
Notification relay: HostName:Port enabling relay of notifications.
String
processRestartTime
Time of the day when the process is automatically restarted. See Automatic process restart.
String
'06:00:00'
runLevel
Priority at start. Low priority modules are first started and last stopped. The syslogd module must therefore have the priority 0.
Short
10
recommendation-more-help
601d79c3-e613-4db3-889a-ae959cd9e3e1