Start av Java™ API i Endpoint Registry (SOAP) endpoint-registry-java-api-quickstart-soap

Java™ API Quick Start(SOAP) finns för Endpoint Registry.

QuickStart: Lägga till en EJB-slutpunkt med Java

QuickStart: Lägga till en SOAP slutpunkt med Java

QuickStart: Lägga till en bevakad mappslutpunkt med Java

QuickStart: Lägga till en e-postslutpunkt med Java

QuickStart: Lägga till en fjärrslutpunkt med Java

QuickStart: Lägga till en TaskManager-slutpunkt med Java

QuickStart: Ändra en slutpunkt med Java

QuickStart: Ta bort en slutpunkt med Java

QuickStart: Hämta slutpunktsanslutningsinformation med Java

AEM Forms-åtgärder kan utföras med AEM Forms starkt typbestämda API och anslutningsläget bör anges till SOAP.

NOTE
Quick Starts in Programming with AEM forms is based on the Forms if you use another operating system, such as UNIX®, replace Windows-specific paths with paths supported by the applicable operating system. På samma sätt måste du ange giltiga anslutningsegenskaper om du använder en annan J2EE-programserver. Se Ange anslutningsegenskaper.
NOTE
Du kan inte arbeta med slutpunkter genom att använda en webbtjänst.

QuickStart: Lägga till en EJB-slutpunkt med Java™ API quickstart-adding-an-ejb-endpoint-using-the-java-api

I följande Java™-kodexempel läggs en EJB-slutpunkt till i en tjänst med namnet MyApplication/EncryptDocument. (Se Lägga till EJB-slutpunkter.)

 /*
     * This Java Quick Start uses the following JAR files
     * 1. adobe-livecycle-client.jar
     * 2. adobe-usermanager-client.jar
     * 3. activation.jar (required for SOAP mode)
     * 4. axis.jar (required for SOAP mode)
     * 5. commons-codec-1.3.jar (required for SOAP mode)
     * 6. commons-collections-3.2.jar  (required for SOAP mode)
     * 7. commons-discovery.jar (required for SOAP mode)
     * 8. commons-logging.jar (required for SOAP mode)
     * 9. dom3-xml-apis-2.5.0.jar (required for SOAP mode)
     * 10. jaxen-1.1-beta-9.jar (required for SOAP mode)
     * 11. jaxrpc.jar (required for SOAP mode)
     * 12. log4j.jar (required for SOAP mode)
     * 13. mail.jar (required for SOAP mode)
     * 14. saaj.jar (required for SOAP mode)
     * 15. wsdl4j.jar (required for SOAP mode)
     * 16. xalan.jar (required for SOAP mode)
     * 17. xbean.jar (required for SOAP mode)
     * 18. xercesImpl.jar (required for SOAP mode)
     *
     * The JBoss files must be kept in the jboss\client folder. You can copy the client folder to
     * your local development environment and then include the 3 JBoss JAR files in your class path
     *
     * These JAR files are in the following path:
     * <install directory>/sdk/client-libs/common
     *
     *
     * <install directory>/jboss/bin/client
     *
     * If you want to invoke a remote Forms Server instance and there is a
     * firewall between the client application and the server, then it is
     * recommended that you use the SOAP mode. When using the SOAP mode,
     * you have to include additional JAR files in the following
     * path
     * <install directory>/sdk/client-libs/thirdparty
     *
     * For information about the SOAP
     * mode and the additional JAR files that need to be included,
     * see "Setting connection properties" in Programming
     * with AEM Forms
     *
     * For complete details about the location of the AEM Forms JAR files,
     * see "Including AEM Forms Java library files" in Programming
     * with AEM Forms
     */
 import java.util.Properties;
 import com.adobe.idp.dsc.clientsdk.ServiceClientFactory;
 import com.adobe.idp.dsc.clientsdk.ServiceClientFactoryProperties;
 import com.adobe.idp.dsc.registry.endpoint.CreateEndpointInfo;
 import com.adobe.idp.dsc.registry.endpoint.client.EndpointRegistryClient;
 import com.adobe.idp.dsc.registry.infomodel.Endpoint;

 public class AddEJBEndPoint {

     public static void main(String[] args) {

     try{
         //Set connection properties    required to invoke AEM Forms
         Properties ConnectionProps = new Properties();

         ConnectionProps.setProperty(ServiceClientFactoryProperties.DSC_DEFAULT_SOAP_ENDPOINT, "https://'[server]:[port]'");
         ConnectionProps.setProperty(ServiceClientFactoryProperties.DSC_TRANSPORT_PROTOCOL,ServiceClientFactoryProperties.DSC_SOAP_PROTOCOL);
         ConnectionProps.setProperty(ServiceClientFactoryProperties.DSC_SERVER_TYPE, "JBoss");
         ConnectionProps.setProperty(ServiceClientFactoryProperties.DSC_CREDENTIAL_USERNAME, "administrator");
         ConnectionProps.setProperty(ServiceClientFactoryProperties.DSC_CREDENTIAL_PASSWORD, "password");

         //Create a ServiceClientFactory object
         ServiceClientFactory myFactory = ServiceClientFactory.createInstance(ConnectionProps);

         //Create an EndpointRegistryClient object
         EndpointRegistryClient endPointClient = new EndpointRegistryClient(myFactory);

         //Create an SOAP endpoint for the MyApplication/EncryptDocument process
         CreateEndpointInfo e = new CreateEndpointInfo();
         e.setConnectorId("EJB");
         e.setDescription("EJB endpoint for the MyApplication/EncryptDocument proces");
         e.setName("MyApplication/EncryptDocument");
         e.setServiceId("MyApplication/EncryptDocument");
         e.setOperationName("*");
         Endpoint endPoint = endPointClient.createEndpoint(e);

         //Enable the SOAP Endpoint
         endPointClient.enable(endPoint);

     }catch (Exception e) {
          e.printStackTrace();
         }

     }
 }

QuickStart: Lägga till en SOAP-slutpunkt med Java™ API quickstart-adding-a-soap-endpoint-using-the-java-api

I följande Java™-kodexempel läggs en SOAP slutpunkt till i en tjänst med namnet MyApplication/EncryptDocument. (Se Lägga till SOAP slutpunkter.)

 /*
     * This Java Quick Start uses the following JAR files
     * 1. adobe-livecycle-client.jar
     * 2. adobe-usermanager-client.jar
     * 3. activation.jar (required for SOAP mode)
     * 4. axis.jar (required for SOAP mode)
     * 5. commons-codec-1.3.jar (required for SOAP mode)
     * 6. commons-collections-3.2.jar  (required for SOAP mode)
     * 7. commons-discovery.jar (required for SOAP mode)
     * 8. commons-logging.jar (required for SOAP mode)
     * 9. dom3-xml-apis-2.5.0.jar (required for SOAP mode)
     * 10. jaxen-1.1-beta-9.jar (required for SOAP mode)
     * 11. jaxrpc.jar (required for SOAP mode)
     * 12. log4j.jar (required for SOAP mode)
     * 13. mail.jar (required for SOAP mode)
     * 14. saaj.jar (required for SOAP mode)
     * 15. wsdl4j.jar (required for SOAP mode)
     * 16. xalan.jar (required for SOAP mode)
     * 17. xbean.jar (required for SOAP mode)
     * 18. xercesImpl.jar (required for SOAP mode)
     *
     * The JBoss files must be kept in the jboss\client folder. You can copy the client folder to
     * your local development environment and then include the 3 JBoss JAR files in your class path
     *
     * These JAR files are in the following path:
     * <install directory>/sdk/client-libs/common
     *
     *
     * <install directory>/jboss/bin/client
     *
     * If you want to invoke a remote Forms Server instance and there is a
     * firewall between the client application and the server, then it is
     * recommended that you use the SOAP mode. When using the SOAP mode,
     * you have to include additional JAR files in the following
     * path
     * <install directory>/sdk/client-libs/thirdparty
     *
     * For information about the SOAP
     * mode and the additional JAR files that need to be included,
     * see "Setting connection properties" in Programming
     * with AEM Forms
     *
     * For complete details about the location of the AEM Forms JAR files,
     * see "Including AEM Forms Java library files" in Programming
     * with AEM Forms
     */
 import java.util.Properties;
 import com.adobe.idp.dsc.clientsdk.ServiceClientFactory;
 import com.adobe.idp.dsc.clientsdk.ServiceClientFactoryProperties;
 import com.adobe.idp.dsc.registry.endpoint.CreateEndpointInfo;
 import com.adobe.idp.dsc.registry.endpoint.client.EndpointRegistryClient;
 import com.adobe.idp.dsc.registry.infomodel.Endpoint;


 public class AddSoapEndPoint {

     public static void main(String[] args) {

     try{
         //Set connection properties    required to invoke AEM Forms
         Properties ConnectionProps = new Properties();
         ConnectionProps.setProperty(ServiceClientFactoryProperties.DSC_DEFAULT_SOAP_ENDPOINT, "https://'[server]:[port]'");
         ConnectionProps.setProperty(ServiceClientFactoryProperties.DSC_TRANSPORT_PROTOCOL,ServiceClientFactoryProperties.DSC_SOAP_PROTOCOL);
         ConnectionProps.setProperty(ServiceClientFactoryProperties.DSC_SERVER_TYPE, "JBoss");
         ConnectionProps.setProperty(ServiceClientFactoryProperties.DSC_CREDENTIAL_USERNAME, "administrator");
         ConnectionProps.setProperty(ServiceClientFactoryProperties.DSC_CREDENTIAL_PASSWORD, "password");

         //Create a ServiceClientFactory object
         ServiceClientFactory myFactory = ServiceClientFactory.createInstance(ConnectionProps);

         //Create an EndpointRegistryClient object
         EndpointRegistryClient endPointClient = new EndpointRegistryClient(myFactory);

         //Create a SOAP Endpoint for the MortgageLoan - Prebuilt process
         CreateEndpointInfo e = new CreateEndpointInfo();
         e.setConnectorId("SOAP");
         e.setDescription("SOAP endpoint for the MyApplication/EncryptDocument proces");
         e.setName("MyApplication/EncryptDocument");
         e.setServiceId("MyApplication/EncryptDocument");
         e.setOperationName("*");
         Endpoint endPoint = endPointClient.createEndpoint(e);

         //Enable the SOAP Endpoint
         endPointClient.enable(endPoint);


     }catch (Exception e) {
          e.printStackTrace();
         }

     }
 }

QuickStart: Lägga till en bevakad mappslutpunkt med Java™ API quickstart-adding-a-watched-folder-endpoint-using-the-java-api

I följande Java™-kodexempel läggs en bevakad mappslutpunkt till i en tjänst med namnet MyApplication/EncryptDocument. (Se Lägga till bevakade mappslutpunkter.)

NOTE
Inkludera filen WatchedFolderEndpointConfigConstants.java i ditt projekt så att du kan kompilera och köra följande snabbstart. (Se Konstanta filer för övervakade mappkonfigurationsvärden.)
 /*
     * This Java Quick Start uses the following JAR files
     * 1. adobe-livecycle-client.jar
     * 2. adobe-usermanager-client.jar
     * 3. activation.jar (required for SOAP mode)
     * 4. axis.jar (required for SOAP mode)
     * 5. commons-codec-1.3.jar (required for SOAP mode)
     * 6. commons-collections-3.2.jar  (required for SOAP mode)
     * 7. commons-discovery.jar (required for SOAP mode)
     * 8. commons-logging.jar (required for SOAP mode)
     * 9. dom3-xml-apis-2.5.0.jar (required for SOAP mode)
     * 10. jaxen-1.1-beta-9.jar (required for SOAP mode)
     * 11. jaxrpc.jar (required for SOAP mode)
     * 12. log4j.jar (required for SOAP mode)
     * 13. mail.jar (required for SOAP mode)
     * 14. saaj.jar (required for SOAP mode)
     * 15. wsdl4j.jar (required for SOAP mode)
     * 16. xalan.jar (required for SOAP mode)
     * 17. xbean.jar (required for SOAP mode)
     * 18. xercesImpl.jar (required for SOAP mode)
     *
     * The JBoss files must be kept in the jboss\client folder. You can copy the client folder to
     * your local development environment and then include the 3 JBoss JAR files in your class path
     *
     * These JAR files are in the following path:
     * <install directory>/sdk/client-libs/common
     *
     *
     * <install directory>/jboss/bin/client
     *
     * If you want to invoke a remote Forms Server instance and there is a
     * firewall between the client application and the server, then it is
     * recommended that you use the SOAP mode. When using the SOAP mode,
     * you have to include additional JAR files in the following
     * path
     * <install directory>/sdk/client-libs/thirdparty
     *
     * For information about the SOAP
     * mode and the additional JAR files that need to be included,
     * see "Setting connection properties" in Programming
     * with AEM Forms
     *
     * For complete details about the location of the AEM Forms JAR files,
     * see "Including AEM Forms Java library files" in Programming
     * with AEM Forms
     */
 import java.util.Properties;
 import com.adobe.idp.dsc.clientsdk.ServiceClientFactory;
 import com.adobe.idp.dsc.clientsdk.ServiceClientFactoryProperties;
 import com.adobe.idp.dsc.registry.endpoint.CreateEndpointInfo;
 import com.adobe.idp.dsc.registry.endpoint.client.EndpointRegistryClient;
 import com.adobe.idp.dsc.registry.infomodel.Endpoint;

 public class AddWatchFolderEndPoint {

     public static void main(String[] args) {

     try{
         //Set connection properties    required to invoke AEM Forms
         Properties ConnectionProps = new Properties();
         ConnectionProps.setProperty(ServiceClientFactoryProperties.DSC_DEFAULT_SOAP_ENDPOINT, "https://'[server]:[port]'");
         ConnectionProps.setProperty(ServiceClientFactoryProperties.DSC_TRANSPORT_PROTOCOL,ServiceClientFactoryProperties.DSC_SOAP_PROTOCOL);
         ConnectionProps.setProperty(ServiceClientFactoryProperties.DSC_SERVER_TYPE, "JBoss");
         ConnectionProps.setProperty(ServiceClientFactoryProperties.DSC_CREDENTIAL_USERNAME, "administrator");
         ConnectionProps.setProperty(ServiceClientFactoryProperties.DSC_CREDENTIAL_PASSWORD, "password");

         //Create a ServiceClientFactory object
         ServiceClientFactory myFactory = ServiceClientFactory.createInstance(ConnectionProps);

         //Create an EndpointRegistryClient object
         EndpointRegistryClient endPointClient = new EndpointRegistryClient(myFactory);

         //Create a Watched Folder endpoint for the MyApplication/EncryptDocument process
         CreateEndpointInfo e = new CreateEndpointInfo();
         e.setConnectorId("WatchedFolder");
         e.setDescription("WatchedFolder endpoint for the EncryptDocument process");
         e.setName("MyApplication/EncryptDocument");
         e.setServiceId("MyApplication/EncryptDocument");
         e.setOperationName("invoke");

         //Set configuration values for a Watched Folder EndPoint
         e.setConfigParameterAsText(WatchedFolderEndpointConfigConstants.PROPERTY_FILEPROVIDER_URL,"C:\\EncryptFolder");
         e.setConfigParameterAsText(WatchedFolderEndpointConfigConstants.PROPERTY_PROPERTY_ASYNCHRONOUS,"true");
         e.setConfigParameterAsText(WatchedFolderEndpointConfigConstants.PROPERTY_PURGE_DURATION,"-1");
         e.setConfigParameterAsText(WatchedFolderEndpointConfigConstants.PROPERTY_REPEAT_INTERVAL,"5");
         e.setConfigParameterAsText(WatchedFolderEndpointConfigConstants.PROPERTY_REPEAT_COUNT,"-1");
         e.setConfigParameterAsText(WatchedFolderEndpointConfigConstants.PROPERTY_THROTTLE,"false");
         e.setConfigParameterAsText(WatchedFolderEndpointConfigConstants.PROPERTY_USERNAMER,"SuperAdmin");
         e.setConfigParameterAsText(WatchedFolderEndpointConfigConstants.PROPERTY_DOMAINNAME,"DefaultDom");
         e.setConfigParameterAsText(WatchedFolderEndpointConfigConstants.PROPERTY_FILEPROVIDER_BATCH_SIZE,"2");
         e.setConfigParameterAsText(WatchedFolderEndpointConfigConstants.PROPERTY_FILEPROVIDER_WAIT_TIME,"0");
         e.setConfigParameterAsText(WatchedFolderEndpointConfigConstants.PROPERTY_EXCLUDE_FILE_PATTERN,".txt");
         e.setConfigParameterAsText(WatchedFolderEndpointConfigConstants.PROPERTY_INCLUDE_FILE_PATTERN,"*");
         e.setConfigParameterAsText(WatchedFolderEndpointConfigConstants.PROPERTY_FILEPROVIDER_RESULT_FOLDER_NAME,"result/%Y/%M/%D/");
         e.setConfigParameterAsText(WatchedFolderEndpointConfigConstants.PROPERTY_FILEPROVIDER_PRESERVE_FOLDER_NAME,"preserve/%Y/%M/%D/");
         e.setConfigParameterAsText(WatchedFolderEndpointConfigConstants.PROPERTY_FILEPROVIDER_FAILURE_FOLDER_NAME,"failure/%Y/%M/%D/");
         e.setConfigParameterAsText(WatchedFolderEndpointConfigConstants.PROPERTY_FILEPROVIDER_PRESERVE_ON_FAILURE,"true");
         e.setConfigParameterAsText(WatchedFolderEndpointConfigConstants.PROPERTY_FILEPROVIDER_OVERWRITE_DUPLICATE_FILENAME,"false");

         //Define input parameter values
         e.setInputParameterMapping("inDoc",
                 "com.adobe.idp.Document",
                 "variable",
                 "*.pdf");

         //Define the output parameter values
         e.setOutputParameterMapping("outDoc",
                 "com.adobe.idp.Document",
                 "%F.pdf");

         //Create the Watched Folder Endpoint
         Endpoint endPoint = endPointClient.createEndpoint(e);

         //Enable the Endpoint
         endPointClient.enable(endPoint);


     }catch (Exception e) {
          e.printStackTrace();
         }

     }
 }

QuickStart: Lägga till en e-postslutpunkt med Java™ API quickstart-adding-an-email-endpoint-using-the-java-api

I följande Java™-kodexempel läggs en e-postslutpunkt till i en tjänst med namnet MyApplication/EncryptDocument t. (Se Lägga till e-postslutpunkter.)

NOTE
Inkludera filen EmailEndpointConfigConstants.java i ditt projekt så att du kan kompilera och köra följande snabbstart. (Se Konstantfil för e-postkonfigurationsvärden.)
 /*
     * This Java Quick Start uses the following JAR files
     * 1. adobe-livecycle-client.jar
     * 2. adobe-usermanager-client.jar
     * 3. activation.jar (required for SOAP mode)
     * 4. axis.jar (required for SOAP mode)
     * 5. commons-codec-1.3.jar (required for SOAP mode)
     * 6. commons-collections-3.2.jar  (required for SOAP mode)
     * 7. commons-discovery.jar (required for SOAP mode)
     * 8. commons-logging.jar (required for SOAP mode)
     * 9. dom3-xml-apis-2.5.0.jar (required for SOAP mode)
     * 10. jaxen-1.1-beta-9.jar (required for SOAP mode)
     * 11. jaxrpc.jar (required for SOAP mode)
     * 12. log4j.jar (required for SOAP mode)
     * 13. mail.jar (required for SOAP mode)
     * 14. saaj.jar (required for SOAP mode)
     * 15. wsdl4j.jar (required for SOAP mode)
     * 16. xalan.jar (required for SOAP mode)
     * 17. xbean.jar (required for SOAP mode)
     * 18. xercesImpl.jar (required for SOAP mode)
     *
     * The JBoss files must be kept in the jboss\client folder. You can copy the client folder to
     * your local development environment and then include the 3 JBoss JAR files in your class path
     *
     * These JAR files are in the following path:
     * <install directory>/sdk/client-libs/common
     *
     *
     * <install directory>/jboss/bin/client
     *
     * If you want to invoke a remote Forms Server instance and there is a
     * firewall between the client application and the server, then it is
     * recommended that you use the SOAP mode. When using the SOAP mode,
     * you have to include additional JAR files in the following
     * path
     * <install directory>/sdk/client-libs/thirdparty
     *
     * For information about the SOAP
     * mode and the additional JAR files that need to be included,
     * see "Setting connection properties" in Programming
     * with AEM Forms
     *
     * For complete details about the location of the AEM Forms JAR files,
     * see "Including AEM Forms Java library files" in Programming
     * with AEM Forms
     */
 import java.util.Properties;
 import com.adobe.idp.dsc.clientsdk.ServiceClientFactory;
 import com.adobe.idp.dsc.clientsdk.ServiceClientFactoryProperties;
 import com.adobe.idp.dsc.registry.endpoint.CreateEndpointInfo;
 import com.adobe.idp.dsc.registry.endpoint.client.EndpointRegistryClient;
 import com.adobe.idp.dsc.registry.infomodel.Endpoint;

 public class AddEmailEndPoint {

     public static void main(String[] args) {

     try{
         //Set connection properties    required to invoke AEM Forms
         Properties ConnectionProps = new Properties();
         ConnectionProps.setProperty(ServiceClientFactoryProperties.DSC_DEFAULT_SOAP_ENDPOINT, "https://'[server]:[port]'");
         ConnectionProps.setProperty(ServiceClientFactoryProperties.DSC_TRANSPORT_PROTOCOL,ServiceClientFactoryProperties.DSC_SOAP_PROTOCOL);
         ConnectionProps.setProperty(ServiceClientFactoryProperties.DSC_SERVER_TYPE, "JBoss");
         ConnectionProps.setProperty(ServiceClientFactoryProperties.DSC_CREDENTIAL_USERNAME, "administrator");
         ConnectionProps.setProperty(ServiceClientFactoryProperties.DSC_CREDENTIAL_PASSWORD, "password");

         //Create a ServiceClientFactory object
         ServiceClientFactory myFactory = ServiceClientFactory.createInstance(ConnectionProps);

         //Create an EndpointRegistryClient object
         EndpointRegistryClient endPointClient = new EndpointRegistryClient(myFactory);

         //Create an Email endpoint for the MyApplication/EncryptDocument process
         CreateEndpointInfo e = new CreateEndpointInfo();
         e.setConnectorId("Email");
         e.setDescription("Email endpoint for the MyApplication/EncryptDocument proces");
         e.setName("MyApplication/EncryptDocument");
         e.setServiceId("MyApplication/EncryptDocument");
         e.setOperationName("invoke");

         //Set Configuration values for the Email endPoint
         e.setConfigParameterAsText(EmailEndpointConfigConstants.PROPERTY_EMAILPROVIDER_CRON_EXPRESSION,"");
         e.setConfigParameterAsText(EmailEndpointConfigConstants.PROPERTY_EMAILPROVIDER_REPREAT_COUNT,"-1");
         e.setConfigParameterAsText(EmailEndpointConfigConstants.PROPERTY_EMAILPROVIDER_REPREAT_INTERVAL,"10");
         e.setConfigParameterAsText(EmailEndpointConfigConstants.PROPERTY_EMAILPROVIDER_START_DELAY,"0");
         e.setConfigParameterAsText(EmailEndpointConfigConstants.PROPERTY_EMAILPROVIDER_BATCH_SIZE,"2");
         e.setConfigParameterAsText(EmailEndpointConfigConstants.PROPERTY_EMAILPROVIDER_USERNAME,"SuperAdmin");
         e.setConfigParameterAsText(EmailEndpointConfigConstants.PROPERTY_EMAILPROVIDER_DOMAINNAME,"DefaultDom");
         e.setConfigParameterAsText(EmailEndpointConfigConstants.PROPERTY_EMAILPROVIDER_DOMAINPATTERN,"*");
         e.setConfigParameterAsText(EmailEndpointConfigConstants.PROPERTY_EMAILPROVIDER_FILEPATTERN,"*");
         e.setConfigParameterAsText(EmailEndpointConfigConstants.PROPERTY_EMAILPROVIDER_RECIPIENT_SUCCESSFUL_JOB,"sender");
         e.setConfigParameterAsText(EmailEndpointConfigConstants.PROPERTY_EMAILPROVIDER_RECIPIENT_FAILED_JOB,"sender");
         e.setConfigParameterAsText(EmailEndpointConfigConstants.PROPERTY_EMAILPROVIDER_INBOX_HOST,"sj-lost");
         e.setConfigParameterAsText(EmailEndpointConfigConstants.PROPERTY_EMAILPROVIDER_INBOX_PORT,"0");
         e.setConfigParameterAsText(EmailEndpointConfigConstants.PROPERTY_EMAILPROVIDER_PROTOCOL,"pop3");
         e.setConfigParameterAsText(EmailEndpointConfigConstants.PROPERTY_EMAILPROVIDER_INBOX_TIMEOUT,"60");
         e.setConfigParameterAsText(EmailEndpointConfigConstants.PROPERTY_EMAILPROVIDER_INBOX_USER,"scott");
         e.setConfigParameterAsText(EmailEndpointConfigConstants.PROPERTY_EMAILPROVIDER_INBOX_PASSWORD,"password");
         e.setConfigParameterAsText(EmailEndpointConfigConstants.PROPERTY_EMAILPROVIDER_INBOX_SSL,"false");
         e.setConfigParameterAsText(EmailEndpointConfigConstants.PROPERTY_EMAILPROVIDER_SMTP_HOST,"sj-lost");
         e.setConfigParameterAsText(EmailEndpointConfigConstants.PROPERTY_EMAILPROVIDER_SMTP_PORT,"25");
         e.setConfigParameterAsText(EmailEndpointConfigConstants.PROPERTY_EMAILPROVIDER_SMTP_USER,"scott");
         e.setConfigParameterAsText(EmailEndpointConfigConstants.PROPERTY_EMAILPROVIDER_SMTP_PASSWORD,"password");
         e.setConfigParameterAsText(EmailEndpointConfigConstants.PROPERTY_EMAILPROVIDER_CHARSET,"password");
         e.setConfigParameterAsText(EmailEndpointConfigConstants.PROPERTY_EMAILPROVIDER_SMTP_SSL,"false");
         e.setConfigParameterAsText(EmailEndpointConfigConstants.PROPERTY_EMAILPROVIDER_FAILED_FOLDER,"failedJobFolder");

         //Define input parameter values
         e.setInputParameterMapping("InDoc",
                 "com.adobe.idp.Document",
                 "variable",
                 "*.pdf");

         //Define the output parameter values
         e.setOutputParameterMapping("SecuredDoc",
                 "com.adobe.idp.Document",
                 "%F.pdf");

         //Create the Email Endpoint
         Endpoint endPoint = endPointClient.createEndpoint(e);

         //Enable the Email Endpoint
         endPointClient.enable(endPoint);

     }catch (Exception e) {
          e.printStackTrace();
         }

     }
 }

QuickStart: Lägga till en fjärrslutpunkt med Java™ API quickstart-adding-a-remoting-endpoint-using-the-java-api

I följande Java™-kodexempel läggs en fjärrslutpunkt till i en tjänst med namnet MyApplication/EncryptDocument. (Se Lägga till fjärrslutpunkter.)

 /*
     * This Java Quick Start uses the following JAR files
     * 1. adobe-livecycle-client.jar
     * 2. adobe-usermanager-client.jar
     * 3. activation.jar (required for SOAP mode)
     * 4. axis.jar (required for SOAP mode)
     * 5. commons-codec-1.3.jar (required for SOAP mode)
     * 6. commons-collections-3.2.jar  (required for SOAP mode)
     * 7. commons-discovery.jar (required for SOAP mode)
     * 8. commons-logging.jar (required for SOAP mode)
     * 9. dom3-xml-apis-2.5.0.jar (required for SOAP mode)
     * 10. jaxen-1.1-beta-9.jar (required for SOAP mode)
     * 11. jaxrpc.jar (required for SOAP mode)
     * 12. log4j.jar (required for SOAP mode)
     * 13. mail.jar (required for SOAP mode)
     * 14. saaj.jar (required for SOAP mode)
     * 15. wsdl4j.jar (required for SOAP mode)
     * 16. xalan.jar (required for SOAP mode)
     * 17. xbean.jar (required for SOAP mode)
     * 18. xercesImpl.jar (required for SOAP mode)
     *
     * The JBoss files must be kept in the jboss\client folder. You can copy the client folder to
     * your local development environment and then include the 3 JBoss JAR files in your class path
     *
     * These JAR files are in the following path:
     * <install directory>/sdk/client-libs/common
     *
     *
     * <install directory>/jboss/bin/client
     *
     * If you want to invoke a remote Forms Server instance and there is a
     * firewall between the client application and the server, then it is
     * recommended that you use the SOAP mode. When using the SOAP mode,
     * you have to include additional JAR files in the following
     * path
     * <install directory>/sdk/client-libs/thirdparty
     *
     * For information about the SOAP
     * mode and the additional JAR files that need to be included,
     * see "Setting connection properties" in Programming
     * with AEM Forms
     *
     * For complete details about the location of the AEM Forms JAR files,
     * see "Including AEM Forms Java library files" in Programming
     * with AEM Forms
     */

 import java.util.Properties;
 import com.adobe.idp.dsc.clientsdk.ServiceClientFactory;
 import com.adobe.idp.dsc.clientsdk.ServiceClientFactoryProperties;
 import com.adobe.idp.dsc.registry.endpoint.CreateEndpointInfo;
 import com.adobe.idp.dsc.registry.endpoint.client.EndpointRegistryClient;
 import com.adobe.idp.dsc.registry.infomodel.Endpoint;

 /**
     * This Java Quick Start adds a Remoting endpoint to a service named MyApplication/EncryptDocument
     */
 public class AddRemotingEndPoint {

     public static void main(String[] args) {

     try{
         //Set connection properties    required to invoke AEM Forms
         Properties ConnectionProps = new Properties();

         ConnectionProps.setProperty(ServiceClientFactoryProperties.DSC_DEFAULT_SOAP_ENDPOINT, "https://'[server]:[port]'");
         ConnectionProps.setProperty(ServiceClientFactoryProperties.DSC_TRANSPORT_PROTOCOL,ServiceClientFactoryProperties.DSC_SOAP_PROTOCOL);
         ConnectionProps.setProperty(ServiceClientFactoryProperties.DSC_SERVER_TYPE, "JBoss");
         ConnectionProps.setProperty(ServiceClientFactoryProperties.DSC_CREDENTIAL_USERNAME, "administrator");
         ConnectionProps.setProperty(ServiceClientFactoryProperties.DSC_CREDENTIAL_PASSWORD, "password");

         //Create a ServiceClientFactory object
         ServiceClientFactory myFactory = ServiceClientFactory.createInstance(ConnectionProps);

         //Create a ConnectorRegistryClient object
         EndpointRegistryClient endPointClient = new EndpointRegistryClient(myFactory);

         //Create an Remoting Endpoint for the MyApplication/EncryptDocument process
         CreateEndpointInfo e = new CreateEndpointInfo();
         e.setConnectorId("Remoting");
         e.setDescription("Remoting endpoint for the MyApplication/EncryptDocument proces");
         e.setName("EncryptDocumentRemoting");
         e.setServiceId("MyApplication/EncryptDocument");
         e.setOperationName("*");

         //Create the EndPoint
         Endpoint endPoint = endPointClient.createEndpoint(e);

         //Enable the Endpoint
         endPointClient.enable(endPoint);

     }catch (Exception e) {
          e.printStackTrace();
         }

     }
 }

QuickStart: Lägga till en TaskManager-slutpunkt med Java™ API quickstart-adding-a-taskmanager-endpoint-using-the-java-api

I följande Java™-kodexempel läggs en TaskManager-slutpunkt till i en tjänst med namnet MyApplication/EncryptDocument. Observera att namnet på kategorin är EncryptProcess. (Se Lägga till slutpunkter för TaskManager.)

 /*
     * This Java Quick Start uses the following JAR files
     * 1. adobe-livecycle-client.jar
     * 2. adobe-usermanager-client.jar
     * 3. activation.jar (required for SOAP mode)
     * 4. axis.jar (required for SOAP mode)
     * 5. commons-codec-1.3.jar (required for SOAP mode)
     * 6. commons-collections-3.2.jar  (required for SOAP mode)
     * 7. commons-discovery.jar (required for SOAP mode)
     * 8. commons-logging.jar (required for SOAP mode)
     * 9. dom3-xml-apis-2.5.0.jar (required for SOAP mode)
     * 10. jaxen-1.1-beta-9.jar (required for SOAP mode)
     * 11. jaxrpc.jar (required for SOAP mode)
     * 12. log4j.jar (required for SOAP mode)
     * 13. mail.jar (required for SOAP mode)
     * 14. saaj.jar (required for SOAP mode)
     * 15. wsdl4j.jar (required for SOAP mode)
     * 16. xalan.jar (required for SOAP mode)
     * 17. xbean.jar (required for SOAP mode)
     * 18. xercesImpl.jar (required for SOAP mode)
     *
     * The JBoss files must be kept in the jboss\client folder. You can copy the client folder to
     * your local development environment and then include the 3 JBoss JAR files in your class path
     *
     * These JAR files are in the following path:
     * <install directory>/sdk/client-libs/common
     *
     *
     * <install directory>/jboss/bin/client
     *
     * If you want to invoke a remote Forms Server instance and there is a
     * firewall between the client application and the server, then it is
     * recommended that you use the SOAP mode. When using the SOAP mode,
     * you have to include additional JAR files in the following
     * path
     * <install directory>/sdk/client-libs/thirdparty
     *
     * For information about the SOAP
     * mode and the additional JAR files that need to be included,
     * see "Setting connection properties" in Programming
     * with AEM Forms
     *
     * For complete details about the location of the AEM Forms JAR files,
     * see "Including AEM Forms Java library files" in Programming
     * with AEM Forms
     */
 import java.util.Properties;
 import com.adobe.idp.dsc.clientsdk.ServiceClientFactory;
 import com.adobe.idp.dsc.clientsdk.ServiceClientFactoryProperties;
 import com.adobe.idp.dsc.registry.endpoint.CreateEndpointCategoryInfo;
 import com.adobe.idp.dsc.registry.endpoint.CreateEndpointInfo;
 import com.adobe.idp.dsc.registry.endpoint.client.EndpointRegistryClient;
 import com.adobe.idp.dsc.registry.infomodel.Endpoint;
 import com.adobe.idp.dsc.registry.infomodel.EndpointCategory;

 public class AddTaskManagerEndPoint {

     public static void main(String[] args) {

     try{
         //Set connection properties    required to invoke AEM Forms
         Properties ConnectionProps = new Properties();

         ConnectionProps.setProperty(ServiceClientFactoryProperties.DSC_DEFAULT_SOAP_ENDPOINT, "https://'[server]:[port]'");
         ConnectionProps.setProperty(ServiceClientFactoryProperties.DSC_TRANSPORT_PROTOCOL,ServiceClientFactoryProperties.DSC_SOAP_PROTOCOL);
         ConnectionProps.setProperty(ServiceClientFactoryProperties.DSC_SERVER_TYPE, "JBoss");
         ConnectionProps.setProperty(ServiceClientFactoryProperties.DSC_CREDENTIAL_USERNAME, "administrator");
         ConnectionProps.setProperty(ServiceClientFactoryProperties.DSC_CREDENTIAL_PASSWORD, "password");

         //Create a ServiceClientFactory object
         ServiceClientFactory myFactory = ServiceClientFactory.createInstance(ConnectionProps);

         //Create a ConnectorRegistryClient object
         EndpointRegistryClient endPointClient = new EndpointRegistryClient(myFactory);

         //Create the category associated with this TaskManager endpoint
         CreateEndpointCategoryInfo catInfo = new CreateEndpointCategoryInfo("EncryptProcess", "Enables this process to be invoked from within Workspace");
         EndpointCategory cat = endPointClient.createEndpointCategory(catInfo);

         //Set TaskManager endpoint attributes
         CreateEndpointInfo e = new CreateEndpointInfo();
         e.setConnectorId("TaskManagerConnector");
         e.setDescription("TaskManagerConnector endpoint for the MyApplication/EncryptDocument process");
         e.setName("MyApplication/EncryptDocument");
         e.setServiceId("MyApplication2/EncryptDocument");
         e.setCategoryId(cat.getId());
         e.setOperationName("invoke");

         //Create the TaskManagerConnector endpoint
         Endpoint endPoint = endPointClient.createEndpoint(e);

         //Enable the endpoint
         endPointClient.enable(endPoint);

     }catch (Exception e) {
          e.printStackTrace();
         }

     }
 }

QuickStart: Ändra en slutpunkt med Java™ API quickstart-modifying-an-endpoint-using-the-java-api

I följande Java™-kodexempel ändras slutpunkten för en bevakad mapp. Slutpunkten är för MyApplication/EncryptDocument -processen. Den bevakade mappen ändras till C:\NewWatchedFolder. (Se Ändra slutpunkter.)

 /*
     * This Java Quick Start uses the following JAR files
     * 1. adobe-livecycle-client.jar
     * 2. adobe-usermanager-client.jar
     * 3. activation.jar (required for SOAP mode)
     * 4. axis.jar (required for SOAP mode)
     * 5. commons-codec-1.3.jar (required for SOAP mode)
     * 6. commons-collections-3.2.jar  (required for SOAP mode)
     * 7. commons-discovery.jar (required for SOAP mode)
     * 8. commons-logging.jar (required for SOAP mode)
     * 9. dom3-xml-apis-2.5.0.jar (required for SOAP mode)
     * 10. jaxen-1.1-beta-9.jar (required for SOAP mode)
     * 11. jaxrpc.jar (required for SOAP mode)
     * 12. log4j.jar (required for SOAP mode)
     * 13. mail.jar (required for SOAP mode)
     * 14. saaj.jar (required for SOAP mode)
     * 15. wsdl4j.jar (required for SOAP mode)
     * 16. xalan.jar (required for SOAP mode)
     * 17. xbean.jar (required for SOAP mode)
     * 18. xercesImpl.jar (required for SOAP mode)
     *
     * The JBoss files must be kept in the jboss\client folder. You can copy the client folder to
     * your local development environment and then include the 3 JBoss JAR files in your class path
     *
     * These JAR files are in the following path:
     * <install directory>/sdk/client-libs/common
     *
     *
     * <install directory>/jboss/bin/client
     *
     * If you want to invoke a remote Forms Server instance and there is a
     * firewall between the client application and the server, then it is
     * recommended that you use the SOAP mode. When using the SOAP mode,
     * you have to include additional JAR files in the following
     * path
     * <install directory>/sdk/client-libs/thirdparty
     *
     * For information about the SOAP
     * mode and the additional JAR files that need to be included,
     * see "Setting connection properties" in Programming
     * with AEM Forms
     *
     * For complete details about the location of the AEM Forms JAR files,
     * see "Including AEM Forms Java library files" in Programming
     * with AEM Forms
     */
 import java.util.Iterator;
 import java.util.List;
 import java.util.Properties;
 import com.adobe.idp.dsc.clientsdk.ServiceClientFactory;
 import com.adobe.idp.dsc.clientsdk.ServiceClientFactoryProperties;
 import com.adobe.idp.dsc.filter.PagingFilter;
 import com.adobe.idp.dsc.registry.endpoint.ModifyEndpointInfo;
 import com.adobe.idp.dsc.registry.endpoint.client.EndpointRegistryClient;
 import com.adobe.idp.dsc.registry.infomodel.Endpoint;

 public class ModifyEndPoint {

     public static void main(String[] args) {

     try{
         Endpoint _endpoint = null;

         //Set connection properties    required to invoke AEM Forms
         Properties ConnectionProps = new Properties();
         ConnectionProps.setProperty(ServiceClientFactoryProperties.DSC_DEFAULT_SOAP_ENDPOINT, "https://'[server]:[port]'");
         ConnectionProps.setProperty(ServiceClientFactoryProperties.DSC_TRANSPORT_PROTOCOL,ServiceClientFactoryProperties.DSC_SOAP_PROTOCOL);
         ConnectionProps.setProperty(ServiceClientFactoryProperties.DSC_SERVER_TYPE, "JBoss");
         ConnectionProps.setProperty(ServiceClientFactoryProperties.DSC_CREDENTIAL_USERNAME, "administrator");
         ConnectionProps.setProperty(ServiceClientFactoryProperties.DSC_CREDENTIAL_PASSWORD, "password");

         //Create a ServiceClientFactory object
         ServiceClientFactory myFactory = ServiceClientFactory.createInstance(ConnectionProps);

         //Create an EndpointRegistryClient object
         EndpointRegistryClient endPointClient = new EndpointRegistryClient(myFactory);

         //Retrieve all endpoints
         List allEndpoints = endPointClient.getEndpoints((PagingFilter)null);

         //Iterate through the returned list of endpoints
         Iterator iter = allEndpoints.iterator();
         int i =0;
         while (iter.hasNext()) {
             _endpoint = (Endpoint) iter.next();

             //Look for an endpoint that belongs to the
             //EncryptDocument service
             String serviceID = _endpoint.getServiceId();

             if (serviceID.matches("MyApplication/EncryptDocument"))
             {
                 //Get the WatchedFolder endpoint
                 String connId = _endpoint.getConnectorId();
                 if (connId.matches("WatchedFolder"))
                 {

                     //Create a ModifyEndpointInfo object
                     ModifyEndpointInfo endpointInfo =new ModifyEndpointInfo();

                     //Modify configuration values
                     endpointInfo.setId(_endpoint.getId());
                     endpointInfo.setConfigParameterAsText("url", "C:\\NewWatchedFolder");
                     endpointInfo.setConfigParameterAsText("asynchronous","true");
                     endpointInfo.setConfigParameterAsText("repeatInterval","5");
                     endpointInfo.setConfigParameterAsText("repeatCount","-1");
                     endpointInfo.setConfigParameterAsText("throttleOn","false");
                     endpointInfo.setConfigParameterAsText("userName","SuperAdmin");
                     endpointInfo.setConfigParameterAsText("domainName","DefaultDom");
                     endpointInfo.setConfigParameterAsText("batchSize","2");
                     endpointInfo.setConfigParameterAsText("waitTime","0");
                     endpointInfo.setConfigParameterAsText("excludeFilePattern",".txt");
                     endpointInfo.setConfigParameterAsText("includeFilePattern","*");
                     endpointInfo.setConfigParameterAsText("resultFolderName","result/%Y/%M/%D/");
                     endpointInfo.setConfigParameterAsText("preserveFolderName","preserve/%Y/%M/%D/");
                     endpointInfo.setConfigParameterAsText("failureFolderName","failure/%Y/%M/%D/");
                     endpointInfo.setConfigParameterAsText("preserveOnFailure","true");
                     endpointInfo.setConfigParameterAsText("overwriteDuplicateFilename","false");

                     //Define input parameter values
                     endpointInfo.setInputParameterMapping("inDoc",
                             "com.adobe.idp.Document",
                             "variable",
                             "*.pdf");

                     //Define the output parameter values
                     endpointInfo.setOutputParameterMapping("outDoc",
                             "com.adobe.idp.Document",
                             "%F.pdf");

                     //Modify the endpoint for this service
                     endPointClient.modifyEndpoint(endpointInfo);
                     System.out.println("The EJB endpoint for the EncryptDocument service was modified");
                 }
             i++;
             }
         }
     }catch (Exception e) {
          e.printStackTrace();
         }
     }
 }

QuickStart: Ta bort en slutpunkt med Java™ API quickstart-removing-an-endpoint-using-the-java-api

Följande Java™-kod tar bort en EJB-slutpunkt från en tjänst med namnet MyApplication/EncryptDocument. (Se Ta bort slutpunkter.)

 /*
     * This Java Quick Start uses the following JAR files
     * 1. adobe-livecycle-client.jar
     * 2. adobe-usermanager-client.jar
     * 3. activation.jar (required for SOAP mode)
     * 4. axis.jar (required for SOAP mode)
     * 5. commons-codec-1.3.jar (required for SOAP mode)
     * 6. commons-collections-3.2.jar  (required for SOAP mode)
     * 7. commons-discovery.jar (required for SOAP mode)
     * 8. commons-logging.jar (required for SOAP mode)
     * 9. dom3-xml-apis-2.5.0.jar (required for SOAP mode)
     * 10. jaxen-1.1-beta-9.jar (required for SOAP mode)
     * 11. jaxrpc.jar (required for SOAP mode)
     * 12. log4j.jar (required for SOAP mode)
     * 13. mail.jar (required for SOAP mode)
     * 14. saaj.jar (required for SOAP mode)
     * 15. wsdl4j.jar (required for SOAP mode)
     * 16. xalan.jar (required for SOAP mode)
     * 17. xbean.jar (required for SOAP mode)
     * 18. xercesImpl.jar (required for SOAP mode)
     *
     * The JBoss files must be kept in the jboss\client folder. You can copy the client folder to
     * your local development environment and then include the 3 JBoss JAR files in your class path
     *
     * These JAR files are in the following path:
     * <install directory>/sdk/client-libs/common
     *
     *
     * <install directory>/jboss/bin/client
     *
     * If you want to invoke a remote Forms Server instance and there is a
     * firewall between the client application and the server, then it is
     * recommended that you use the SOAP mode. When using the SOAP mode,
     * you have to include additional JAR files in the following
     * path
     * <install directory>/sdk/client-libs/thirdparty
     *
     * For information about the SOAP
     * mode and the additional JAR files that need to be included,
     * see "Setting connection properties" in Programming
     * with AEM Forms
     *
     * For complete details about the location of the AEM Forms JAR files,
     * see "Including AEM Forms Java library files" in Programming
     * with AEM Forms
     */
 import java.util.Iterator;
 import java.util.List;
 import java.util.Properties;
 import com.adobe.idp.dsc.clientsdk.ServiceClientFactory;
 import com.adobe.idp.dsc.clientsdk.ServiceClientFactoryProperties;
 import com.adobe.idp.dsc.filter.PagingFilter;
 import com.adobe.idp.dsc.registry.endpoint.client.EndpointRegistryClient;
 import com.adobe.idp.dsc.registry.infomodel.Endpoint;

 /**
     * This Java Quick Start removes an EJB endpoint from a service named MyApplication/EncryptDocument
     */
 public class RemoveEndPoints {

     public static void main(String[] args) {

     try{
         Endpoint _endpoint = null;

         //Set connection properties    required to invoke AEM Forms
         Properties ConnectionProps = new Properties();
         ConnectionProps.setProperty(ServiceClientFactoryProperties.DSC_DEFAULT_SOAP_ENDPOINT, "https://'[server]:[port]'");
         ConnectionProps.setProperty(ServiceClientFactoryProperties.DSC_TRANSPORT_PROTOCOL,ServiceClientFactoryProperties.DSC_SOAP_PROTOCOL);
         ConnectionProps.setProperty(ServiceClientFactoryProperties.DSC_SERVER_TYPE, "JBoss");
         ConnectionProps.setProperty(ServiceClientFactoryProperties.DSC_CREDENTIAL_USERNAME, "administrator");
         ConnectionProps.setProperty(ServiceClientFactoryProperties.DSC_CREDENTIAL_PASSWORD, "password");

         //Create a ServiceClientFactory object
         ServiceClientFactory myFactory = ServiceClientFactory.createInstance(ConnectionProps);

         //Create an EndpointRegistryClient object
         EndpointRegistryClient endPointClient = new EndpointRegistryClient(myFactory);

         //Get all endpoints
         List allEndpoints = endPointClient.getEndpoints((PagingFilter)null);

         //Iterate through the returned list of endpoints
         Iterator iter = allEndpoints.iterator();
         int i =0;
         while (iter.hasNext()) {
             _endpoint = (Endpoint) iter.next();

             //Look for an endpoint that belongs to the
             //EncryptDocument service
             String serviceID = _endpoint.getServiceId();

             if (serviceID.matches("MyApplication/EncryptDocument"))
             {
                 //Get the EJB endpoint that belongs to
                 //this service
                 String connId = _endpoint.getConnectorId();
                 if (connId.matches("EJB"))
                 {
                     //Remove the EJB endpoint for this service
                     endPointClient.remove(_endpoint);
                     System.out.println("The EJB endpoint for the EncryptDocument service was removed");
                 }
             i++;
             }
         }
     }catch (Exception e) {
          e.printStackTrace();
         }
     }
 }

QuickStart: Hämta slutpunktsanslutningsinformation med Java™ API quickstart-retrieving-endpoint-connector-information-using-the-java-api

Följande Java™-kod hämtar information om en bevakad mappslutpunkt. Information om varje konfigurationsvärde hämtas och visas. Den här kodlistan anger om varje konfigurationsvärde är obligatoriskt eller valfritt. Dessutom visas namn och värde för varje konfigurationsvärde. (Se Hämtar information om slutpunktsanslutning.)

 /*
     * This Java Quick Start uses the following JAR files
     * 1. adobe-livecycle-client.jar
     * 2. adobe-usermanager-client.jar
     * 3. activation.jar (required for SOAP mode)
     * 4. axis.jar (required for SOAP mode)
     * 5. commons-codec-1.3.jar (required for SOAP mode)
     * 6. commons-collections-3.2.jar  (required for SOAP mode)
     * 7. commons-discovery.jar (required for SOAP mode)
     * 8. commons-logging.jar (required for SOAP mode)
     * 9. dom3-xml-apis-2.5.0.jar (required for SOAP mode)
     * 10. jaxen-1.1-beta-9.jar (required for SOAP mode)
     * 11. jaxrpc.jar (required for SOAP mode)
     * 12. log4j.jar (required for SOAP mode)
     * 13. mail.jar (required for SOAP mode)
     * 14. saaj.jar (required for SOAP mode)
     * 15. wsdl4j.jar (required for SOAP mode)
     * 16. xalan.jar (required for SOAP mode)
     * 17. xbean.jar (required for SOAP mode)
     * 18. xercesImpl.jar (required for SOAP mode)
     *
     * The JBoss files must be kept in the jboss\client folder. You can copy the client folder to
     * your local development environment and then include the 3 JBoss JAR files in your class path
     *
     * These JAR files are in the following path:
     * <install directory>/sdk/client-libs/common
     *
     *
     * <install directory>/jboss/bin/client
     *
     * If you want to invoke a remote Forms Server instance and there is a
     * firewall between the client application and the server, then it is
     * recommended that you use the SOAP mode. When using the SOAP mode,
     * you have to include additional JAR files in the following
     * path
     * <install directory>/sdk/client-libs/thirdparty
     *
     * For information about the SOAP
     * mode and the additional JAR files that need to be included,
     * see "Setting connection properties" in Programming
     * with AEM Forms
     *
     * For complete details about the location of the AEM Forms JAR files,
     * see "Including AEM Forms Java library files" in Programming
     * with AEM Forms
     */
 import java.util.Properties;
 import com.adobe.idp.dsc.clientsdk.ServiceClientFactory;
 import com.adobe.idp.dsc.clientsdk.ServiceClientFactoryProperties;
 import com.adobe.idp.dsc.registry.connector.client.ConnectorRegistryClient;
 import com.adobe.idp.dsc.registry.infomodel.ConfigParameter;
 import com.adobe.idp.dsc.registry.infomodel.Endpoint;

 public class RetrieveConnectorInfo {

     public static void main(String[] args) {

     try{
         Endpoint _endpoint = null;

         //Set connection properties    required to invoke AEM Forms
         Properties ConnectionProps = new Properties();
         ConnectionProps.setProperty(ServiceClientFactoryProperties.DSC_DEFAULT_SOAP_ENDPOINT, "https://'[server]:[port]'");
         ConnectionProps.setProperty(ServiceClientFactoryProperties.DSC_TRANSPORT_PROTOCOL,ServiceClientFactoryProperties.DSC_SOAP_PROTOCOL);
         ConnectionProps.setProperty(ServiceClientFactoryProperties.DSC_SERVER_TYPE, "JBoss");
         ConnectionProps.setProperty(ServiceClientFactoryProperties.DSC_CREDENTIAL_USERNAME, "administrator");
         ConnectionProps.setProperty(ServiceClientFactoryProperties.DSC_CREDENTIAL_PASSWORD, "password");

         //Create a ServiceClientFactory object
         ServiceClientFactory myFactory = ServiceClientFactory.createInstance(ConnectionProps);

         //Create a ConnectorRegistry Client object
         ConnectorRegistryClient conClient = new ConnectorRegistryClient(myFactory);

         //Specify WatchedFolder as the connector type
         Endpoint endpoint = conClient.getEndpointDefinition("WatchedFolder");

         //Get all the configuration values associated with this connector type
         ConfigParameter[] allConfigParams = endpoint.getConfigParameters();
         int len = allConfigParams.length;

         //Get the value of the individual configuration parameter values
         //and which ones are required and which ones are optional
         for (int i=0; i<len; i++)
         {
             //Get an individual ConfigParameter object
             ConfigParameter cp = (ConfigParameter)allConfigParams[i];

             //Determine if this configuration value is required
             if (cp.isRequired() == true)
                 System.out.println("This required configuration value name is "+cp.getName() + ". Its value is "+cp.getTextValue());
             else
                 System.out.println("This optional configuration value name is "+cp.getName() + ". Its value is "+cp.getTextValue());
         }
     }catch (Exception e) {
          e.printStackTrace();
         }
     }
 }
recommendation-more-help
19ffd973-7af2-44d0-84b5-d547b0dffee2