SPA용 원격 SPA 편집기 Bootstrap

IMPORTANT
SPA 편집기는 새로운 프로젝트에서는 더 이상 사용되지 않습니다. 기존 프로젝트에 대해서는 Adobe에서 지원하지만 새로운 프로젝트에는 사용하면 안 됩니다. AEM에서 Headless 콘텐츠를 관리하기 위한 권장 편집기는 다음과 같습니다.

편집 가능한 영역을 원격 SPA에 추가하려면 먼저 AEM SPA Editor JavaScript SDK 및 기타 몇 가지 구성으로 부트스트랩해야 합니다.

AEM SPA Editor JS SDK npm 종속성 설치

먼저 React 프로젝트에 대한 AEM의 SPA npm 종속성을 검토하고 설치합니다.

$ cd ~/Code/aem-guides-wknd-graphql/remote-spa-tutorial/react-app
$ npm install @adobe/aem-spa-page-model-manager
$ npm install @adobe/aem-spa-component-mapping
$ npm install @adobe/aem-react-editable-components

SPA 환경 변수 검토

AEM과 상호 작용하는 방법을 알 수 있도록 몇 가지 환경 변수를 원격 SPA에 노출해야 합니다.

  • IDE의 ~/Code/aem-guides-wknd-graphql/remote-spa-tutorial/react-app에서 원격 SPA 프로젝트 열기

  • .env.development 파일을 엽니다.

  • 파일에서 키에 특별히 주의하고 필요에 따라 업데이트합니다.

    code language-none
    REACT_APP_HOST_URI=http://localhost:4502
    
    REACT_APP_USE_PROXY=true
    
    REACT_APP_AUTH_METHOD=basic
    
    REACT_APP_BASIC_AUTH_USER=admin
    REACT_APP_BASIC_AUTH_PASS=admin
    

    원격 SPA 환경 변수

    React의 사용자 지정 환경 변수 앞에 REACT_APP_이(가) 있어야 합니다.

    • REACT_APP_HOST_URI: 원격 SPA가 연결하는 AEM 서비스의 체계 및 호스트입니다.

      • 이 값은 AEM 환경(로컬, 개발, 스테이지 또는 프로덕션) 및 AEM 서비스 유형(작성자 대 게시)의 여부에 따라 변경됩니다
    • REACT_APP_USE_PROXY: http-proxy-middleware 모듈을 사용하여 React 개발 서버에 /content, /graphql, .model.json과(와) 같은 프록시 AEM 요청을 보내면 개발 중 CORS 문제가 발생하지 않습니다.

    • REACT_APP_AUTH_METHOD: AEM에서 제공하는 요청에 대한 인증 방법, 옵션은 'service-token', 'dev-token', 'basic' 또는 no-auth 사용 사례를 위해 비워 둡니다.

      • AEM 작성자에 사용 필요
      • AEM 게시와 함께 사용해야 할 수도 있습니다(콘텐츠가 보호된 경우).
      • AEM SDK에 대해 개발하는 경우 기본 인증을 통해 로컬 계정을 지원합니다. 이 자습서에서 사용하는 메서드입니다.
      • AEM as a Cloud Service과 통합할 때 액세스 토큰을 사용하세요.
    • REACT_APP_BASIC_AUTH_USER: AEM 콘텐츠를 검색하는 동안 SPA에서 인증하는 AEM 사용자 이름.

    • REACT_APP_BASIC_AUTH_PASS: AEM 콘텐츠를 검색하는 동안 SPA에서 인증하는 AEM 암호.

ModelManager API 통합

앱에서 사용할 수 있는 AEM SPA npm 종속성을 사용하여 ReactDOM.render(...)이(가) 호출되기 전에 프로젝트 index.js에서 AEM ModelManager을(를) 초기화합니다.

ModelManager은(는) AEM에 연결하여 편집 가능한 콘텐츠를 검색할 수 있습니다.

  1. IDE에서 원격 SPA 프로젝트 열기

  2. src/index.js 파일을 엽니다.

  3. 가져오기 ModelManager을(를) 추가하고 root.render(..) 호출 전에 초기화합니다.

    code language-javascript
    ...
    import { ModelManager } from "@adobe/aem-spa-page-model-manager";
    
    // Initialize the ModelManager before invoking root.render(..).
    ModelManager.initializeAsync();
    
    const container = document.getElementById('root');
    const root = createRoot(container);
    root.render(<App />);
    

src/index.js 파일은 다음과 같아야 합니다.

src/index.js

내부 SPA 프록시 설정

편집 가능한 SPA를 만들 때 적절한 요청을 AEM으로 라우팅하도록 구성된 내부 프록시를 SPA에서 설정하는 것이 가장 좋습니다. 이 작업은 기본 WKND GraphQL 앱에서 이미 설치된 http-proxy-middleware npm 모듈을 사용하여 수행됩니다.

  1. IDE에서 원격 SPA 프로젝트 열기

  2. src/proxy/setupProxy.spa-editor.auth.basic.js에서 파일 열기

  3. 다음 코드를 사용하여 파일을 업데이트합니다.

    code language-javascript
    const { createProxyMiddleware } = require('http-proxy-middleware');
    const {REACT_APP_HOST_URI, REACT_APP_BASIC_AUTH_USER, REACT_APP_BASIC_AUTH_PASS } = process.env;
    
    /*
        Set up a proxy with AEM for local development
        In a production environment this proxy should be set up at the webserver level or absolute URLs should be used.
    */
    module.exports = function(app) {
    
        /**
        * Filter to check if the request should be re-routed to AEM. The paths to be re-routed at:
        * - Starts with /content (AEM content)
        * - Starts with /graphql (AEM graphQL endpoint)
        * - Ends with .model.json (AEM Content Services)
        *
        * @param {*} path the path being requested of the SPA
        * @param {*} req the request object
        * @returns true if the SPA request should be re-routed to AEM
        */
        const toAEM = function(path, req) {
            return path.startsWith('/content') ||
                path.startsWith('/graphql') ||
                path.endsWith('.model.json')
        }
    
        /**
        * Re-writes URLs being proxied to AEM such that they can resolve to real AEM resources
        * - The "root" case of `/.model.json` are rewritten to the SPA's home page in AEM
        * - .model.json requests for /adventure:xxx routes are rewritten to their corresponding adventure page under /content/wknd-app/us/en/home/adventure/
        *
        * @param {*} path the path being requested of the SPA
        * @param {*} req the request object
        * @returns returns a re-written path, or nothing to use the @param path
        */
        const pathRewriteToAEM = function (path, req) {
            if (path === '/.model.json') {
                return '/content/wknd-app/us/en/home.model.json';
            } else if (path.startsWith('/adventure/') && path.endsWith('.model.json')) {
                return '/content/wknd-app/us/en/home/adventure/' + path.split('/').pop();
            }
        }
    
        /**
        * Register the proxy middleware using the toAEM filter and pathRewriteToAEM rewriter
        */
        app.use(
            createProxyMiddleware(
                toAEM, // Only route the configured requests to AEM
                {
                    target: REACT_APP_HOST_URI,
                    changeOrigin: true,
                    // Pass in credentials when developing against an Author environment
                    auth: `${REACT_APP_BASIC_AUTH_USER}:${REACT_APP_BASIC_AUTH_PASS}`,
                    pathRewrite: pathRewriteToAEM // Rewrite SPA paths being sent to AEM
                }
            )
        );
    
        /**
        * Enable CORS on requests from the SPA to AEM
        *
        * If this rule is not in place, CORS errors will occur when running the SPA on http://localhost:3000
        */
        app.use((req, res, next) => {
            res.header("Access-Control-Allow-Origin", REACT_APP_HOST_URI);
            next();
        });
    };
    

    setupProxy.spa-editor.auth.basic.js 파일은 다음과 같아야 합니다.

    src/proxy/setupProxy.spa-editor.auth.basic.js

    이 프록시 구성은 다음 두 가지 주요 작업을 수행합니다.

    1. SPA(http://localhost:3000)에 대한 프록시 관련 요청을 AEM http://localhost:4502(으)로

      • toAEM(path, req)에 정의된 대로 AEM에서 제공해야 함을 나타내는 패턴과 일치하는 경로를 가진 요청만 프록시합니다.
      • pathRewriteToAEM(path, req)에 정의된 대로 SPA 경로를 해당 AEM 페이지로 다시 씁니다.
    2. res.header("Access-Control-Allow-Origin", REACT_APP_HOST_URI);에서 정의한 대로 AEM 콘텐츠에 액세스할 수 있도록 모든 요청에 CORS 헤더를 추가합니다.

      • 이 내용이 추가되지 않으면 SPA에서 AEM 콘텐츠를 로드할 때 CORS 오류가 발생합니다.
  4. src/setupProxy.js 파일을 엽니다.

  5. setupProxy.spa-editor.auth.basic 프록시 구성 파일을 가리키는 줄을 검토하십시오.

    code language-none
    ...
    case BASIC:
    // Use user/pass for local development with Local Author Env
    return require('./proxy/setupProxy.spa-editor.auth.basic');
    ...
    

src/setupProxy.js 또는 참조된 파일을 변경하려면 SPA를 다시 시작해야 합니다.

정적 SPA 리소스

WKND 로고 및 그래픽 로드 등 정적 SPA 리소스에서는 src URL이 업데이트되어야 원격 SPA의 호스트에서 해당 SPA를 로드할 수 있습니다. 상대적으로 SPA를 작성을 위해 SPA 편집기에 로드할 경우 이러한 URL은 기본적으로 SPA가 아닌 AEM의 호스트를 사용하도록 설정되므로 아래 이미지에 표시된 대로 404개의 요청이 발생합니다.

끊어진 정적 리소스

이 문제를 해결하려면 원격 SPA에서 호스팅하는 정적 리소스가 원격 SPA의 원본을 포함하는 절대 경로를 사용하도록 합니다.

  1. IDE에서 SPA 프로젝트 열기

  2. SPA의 환경 변수 파일 src/.env.development을(를) 열고 SPA의 공개 URI에 대한 변수를 추가합니다.

    code language-none
    ...
    # The base URI the SPA is accessed from
    REACT_APP_PUBLIC_URI=http://localhost:3000
    

    AEM as a Cloud Service에 배포할 때는 해당 .env개 파일에 대해 동일해야 합니다.

  3. src/App.js 파일을 엽니다.

  4. SPA의 환경 변수에서 SPA의 공개 URI 가져오기

    code language-javascript
    const {  REACT_APP_PUBLIC_URI } = process.env;
    
    function App() { ... }
    
  5. SPA에서 강제로 해결하려면 WKND 로고 <img src=.../>REACT_APP_PUBLIC_URI 접두사를 붙입니다.

    code language-html
    <img src={REACT_APP_PUBLIC_URI + '/' +  logo} className="logo" alt="WKND Logo"/>
    
  6. src/components/Loading.js에서 이미지를 로드할 때도 동일한 작업을 수행합니다.

    code language-javascript
    const { REACT_APP_PUBLIC_URI } = process.env;
    
    class Loading extends Component {
    
        render() {
            return (<div className="loading">
                <img src={REACT_APP_PUBLIC_URI + '/' + loadingIcon} alt="Loading..." />
            </div>);
        }
    }
    
  7. src/components/AdventureDetails.js에서 뒤로 단추의 2개 인스턴스 ​에 대해

    code language-javascript
    const { REACT_APP_PUBLIC_URI } = process.env;
    
    function AdventureDetail(props) {
        ...
        render() {
            <img className="Backbutton-icon" src={REACT_APP_PUBLIC_URI + '/' + backIcon} alt="Return" />
        }
    }
    

App.js, Loading.jsAdventureDetails.js 파일은 다음과 같아야 합니다.

정적 리소스

AEM 반응형 그리드

SPA에서 편집 가능한 영역에 대해 SPA Editor의 레이아웃 모드를 지원하려면 AEM의 반응형 그리드 CSS를 SPA에 통합해야 합니다. 걱정하지 마십시오. 이 그리드 시스템은 편집 가능한 컨테이너에만 적용할 수 있으며 선택한 그리드 시스템을 사용하여 나머지 SPA의 레이아웃을 구동할 수 있습니다.

AEM 반응형 그리드 SCSS 파일을 SPA에 추가합니다.

  1. IDE에서 SPA 프로젝트 열기

  2. 다음 두 파일을 다운로드하여 src/styles에 복사합니다.

    • _grid.scss
      • AEM 응답형 격자 SCSS 생성기
    • _grid-init.scss
      • SPA의 특정 중단점(데스크톱 및 모바일)과 열(12)을 사용하여 _grid.scss을(를) 호출합니다.
  3. src/App.scss을(를) 열고 ./styles/grid-init.scss 가져오기

    code language-scss
    ...
    @import './styles/grid-init';
    ...
    

_grid.scss_grid-init.scss 파일은 다음과 같아야 합니다.

AEM 응답형 격자 SCSS

이제 SPA에는 AEM 컨테이너에 추가된 구성 요소에 대해 AEM의 레이아웃 모드 를 지원하는 데 필요한 CSS가 포함됩니다.

유틸리티 클래스

다음 유틸리티 클래스에서 React 앱 프로젝트에 복사합니다.

  • ~/Code/aem-guides-wknd-graphql/remote-spa-tutorial/react-app/src/components/editable/core/RoutedLink.js(으)로 RoutedLink.js
  • EditorPlaceholder.js에서 ~/Code/aem-guides-wknd-graphql/remote-spa-tutorial/react-app/src/components/editable/core/util/EditorPlaceholder.js(으)로
  • withConditionalPlaceholder.js에서 ~/Code/aem-guides-wknd-graphql/remote-spa-tutorial/react-app/src/components/editable/core/util/withConditionalPlaceholder.js(으)로
  • withStandardBaseCssClass.js에서 ~/Code/aem-guides-wknd-graphql/remote-spa-tutorial/react-app/src/components/editable/core/util/withStandardBaseCssClass.js(으)로

원격 SPA 유틸리티 클래스

SPA 시작

이제 SPA가 AEM과의 통합을 위해 부트스트랩되었으므로 SPA를 실행하여 어떤 모습인지 알아보겠습니다.

  1. 명령줄에서 SPA 프로젝트의 루트로 이동합니다

  2. 일반 명령을 사용하여 SPA 시작 (아직 수행하지 않은 경우)

    code language-shell
    $ cd ~/Code/aem-guides-wknd-graphql/remote-spa-tutorial/react-app
    $ npm install
    $ npm run start
    
  3. http://localhost:3000에서 SPA를 찾아봅니다. 모든 것이 좋아 보여야 합니다!

http://localhost:3000 에서 실행 중인 SPA

AEM SPA 편집기에서 SPA 열기

http://localhost:3000에서 실행 중인 SPA를 사용하여 AEM SPA 편집기를 열어 보겠습니다. SPA에서 아직 편집할 수 있는 항목이 없습니다. AEM의 SPA만 확인합니다.

  1. AEM 작성자에 로그인

  2. 사이트 > WKND 앱 > us > en(으)로 이동합니다.

  3. WKND 앱 홈 페이지 ​를 선택하고 편집 ​을 탭하면 SPA가 나타납니다.

    WKND 앱 홈 페이지 편집

  4. 오른쪽 상단의 모드 전환기를 사용하여 미리 보기(으)로 전환

  5. SPA 주위를 클릭합니다.

    http://localhost:3000 에서 실행 중인 SPA

축하합니다!

원격 SPA를 AEM SPA 편집기와 호환되도록 부트스트랩했습니다! 이제 다음 방법을 이해할 수 있습니다.

  • AEM SPA Editor JS SDK npm 종속성 을 SPA 프로젝트에 추가합니다.
  • SPA의 환경 변수 구성
  • SPA와 ModelManager API 통합
  • 적절한 콘텐츠 요청을 AEM으로 라우팅하도록 SPA에 대한 내부 프록시를 설정합니다.
  • SPA 편집기의 컨텍스트에서 해결되는 정적 SPA 리소스와 관련된 문제 해결
  • AEM의 편집 가능한 컨테이너에서 레이아웃 링을 지원하도록 AEM의 응답형 그리드 CSS 추가

다음 단계

이제 AEM SPA 편집기와의 호환성을 기준선에 도달했으므로 편집 가능한 영역을 도입할 수 있습니다. 먼저 SPA에서 고정된 편집 가능한 구성 요소를 배치하는 방법을 살펴봅니다.

recommendation-more-help
e25b6834-e87f-4ff3-ba56-4cd16cdfdec4