EMC Documentum 저장소 백업 및 복구 backing-up-and-recovering-the-emc-documentum-repository

CAUTION
AEM 6.4가 확장 지원이 종료되었으며 이 설명서는 더 이상 업데이트되지 않습니다. 자세한 내용은 기술 지원 기간. 지원되는 버전 찾기 여기.

이 섹션에서는 AEM Forms 환경을 위해 구성된 EMC Documentum 저장소를 백업 및 복구하는 데 필요한 작업에 대해 설명합니다.

NOTE
이러한 지침은 Connectors for ECM 및 EMC Documentum Content Server가 포함된 AEM Forms가 필요에 따라 설치 및 구성되어 있다고 가정합니다.

백업 및 복원 프로세스 모두에 두 가지 주요 작업이 있습니다.

  • AEM Forms 환경을 백업(또는 복원)합니다.
  • EMC Documentum Content Server 백업(또는 복원)
NOTE
EMC Documentum 시스템을 백업하기 전에 AEM 양식 데이터를 백업하고 EMC Documentum 시스템을 복원한 후 AEM 양식 환경을 복원하십시오.

소프트웨어 요구 사항 software-requirements

EMC Documentum Content Server에서 필요한 백업 작업을 수행하려면 EMC NetWorker 또는 CIA에서 CIA SmartRecovery for EMC Documentum과 같은 적절한 타사 유틸리티를 구입하십시오. 다음 지침은 EMC NetWorker Module 버전 7.2.2를 사용하는 단계에 대해 설명합니다.

다음과 같은 EMC NetWorker 모듈이 필요합니다.

  • NetWorker Module
  • NetWorker 구성 마법사
  • NetWorker 디바이스 구성 마법사
  • Content Server에서 사용하는 데이터베이스 유형에 대한 NetWorker Module
  • NetWorker Module for Documentum

백업 및 복구를 위한 EMC Document Content Server 준비 preparing-the-emc-document-content-server-for-backup-and-recovery

이 섹션에서는 Content Server에 EMC NetWorker 소프트웨어를 설치하고 구성하는 방법에 대해 설명합니다.

EMC Documentum 서버 백업 준비

  1. EMC Documentum Content Server에 모든 기본값을 그대로 사용하여 EMC NetWorker 모듈을 설치합니다.

    설치 프로세스 중에 Content Server 컴퓨터의 서버 이름을 NetWorker Server 이름. EMC NetWorker Module for your database를 설치할 때 "전체" 설치를 선택합니다.

  2. 아래 샘플 컨텐츠를 사용하여 이름이 인 구성 파일을 만듭니다. nsrnmd_win.cfg Content Server의 액세스 가능한 위치에 저장합니다. 이 파일은 백업 및 복원 명령으로 호출됩니다.

    다음 텍스트에는 줄바꿈을 위한 서식 문자가 포함되어 있습니다. 이 텍스트를 이 문서 외부의 위치에 복사하는 경우 한 번에 일부를 복사하고 새 위치에 붙여넣을 때 서식 문자를 제거합니다.

    code language-as3
     ################################################
     # NetWorker Module for Documentum v1.2 nsrnmd_win.cfg D5.3+ example with
     # typical set of working parameters.  THIS FILE MUST BE SITE-CUSTOMISED.
     #
     # Parameters not shown can be set in this file (as per site customisation) #or from the command-line.
     #
     # Please refer to the user Guides for details on all parameters, including
     # those not listed below.
     # Note: DCTM environment for D6 is slightly different from D5, refer to D6
     # Installation Guide to update the values.
     ################################################
     #Can get values for most of below from doing as the dctm inst owner: cmd> set DOCUMENTUM=C:\Documentum
     DM_HOME=C:\Documentum\product\6.0
     JAVA_HOME=C:\Progra~1\Documentum\java\1.5.0_12
     JAVA_PATH=C:\Progra~1\Documentum\java\1.5.0_12\bin
     PATH=C:\WINNT\system32;C:\WINNT;C:\WINNT\system32\WBEM;C:\Documentum\product\6.0\bin;C:\Documentum\fulltext\fast;C:\Documentum\product\6.0\fusion;C:\Program Files\Documentum\Shared;C:\Program Files\Legato\nsr\bin;C:\Program Files\Microsoft SQL Server\80\Tools\Binn;C:\Program Files\Microsoft SQL Server\90\DTS\Binn\;C:\Program Files\Microsoft SQL Server\90\Tools\binn;C:\Program Files\Microsoft SQL Server\90\Tools\Binn\VSShell\Common7\IDE;C:\Program Files\Documentum\java\1.5.0_12\bin;C:\Documentum\config;C:\Documentum
     #See also manifest dctm.jar file for class path locations
     CLASSPATH=.;C:\Program Files\Legato\nsr\bin;C:\Program Files\Legato\nsr\bin\nsrnmdde.jar;C:\Program Files\Documentum\java\1.5.0_12\lib\tools.jar;C:\Program Files\Documentum\Shared\dfc.jar;C:\Program Files\Documentum\Shared\aspectjrt.jar;C:\Program Files\Documentum\dctm.jar;C:\Program Files\Documentum\Shared\workflow.jar;C:\Program Files\Documentum\Shared\log4j.jar;C:\Program Files\Documentum\java\1.5.0_12\lib\dt.jar;C:\Documentum\config
    
     ################################################
     #If not using nsrnmdsv -m ALL|DB|DB_LOG|FTI|FTI_ALL|ICF|SA|SA_ALL, set #for backup
     NMD_SCOPE=ALL
     #Mandatory when scope (backup or restore) is FTI/SA without -a option
     #NMD_OBJECT_NAME=filestore_01
     ################################################
     NMDDE_DM_DOCBASE=Docbase
     NMDDE_DM_USER=Administrator
     #NMDDE_DM_PASSWD must be set via running: nsrnmdsv -f <nmdcfg> -P <pwd>.
     ################################################
     #DB related hooks to invoke arbitrary scripts:
     #Set if DB is on a remote host
     #NMD_DB_HOST=dbhost
     #Pure basename implies remote host execution; absolute path ... local
     #execution as in NMD v1.0.
     #
     #Remote execution requires script be put in remote nsrexecd bin directory
     #and D5.3+ host be added to remote nsr\res\servers file w/ nsrexecd recycled
     #
     #Refer to user Guides for sample script code.
     NMD_DB_FULL_BACKUP_CMD=C:\DocumentumBackup\Scripts\nsrnmddbf.bat
     NMD_DB_LOG_BACKUP_CMD=C:\DocumentumBackup\Scripts\nsrnmddbl.bat
     NMD_DB_INCR_BACKUP_CMD=C:\DocumentumBackup\Scripts\nsrnmddbi.bat
     ################################################
     #For D5.3+ only: NMD_FTI_INCLUDED, NMD_FTI_HOST, NMD_FTI_USER,
     #NMD_FTI_PASSWD & NMD_FTI_SUBDIRS.
     #Optional for remote D5.3+ FTI server
     NMD_FTI_INCLUDED=no
     #NMD_FTI_HOST=ftihost
     #Recommended for D5.3+ FTI server quiesce/unquiesce
     #NMD_FTI_USER=ftiadmin
     #The index name: optional for D5.3+ FTI server, used with -M FTI_ALL or
     #-M ALL
     #NMD_FTI_NAME=rep_name_ftindex_01
     #Recommended for D5.3+ FTI server quiesce/unquiesce
     #NMDDE_FTI_PASSWD must be set via running: nsrnmdsv -f <nmdcfg> -P <pwd>
     #-M FTI.
     #Pure basename implies remote host execution; absolute path ... local execution
     #as in NMD v1.0.
     #
     #Remote execution requires script be put in remote nsrexecd bin directory
     #and D5.3+ host be added to remote nsr\res\servers file w/ nsrexecd
     #recycled.
     #
     #See example nsrnmdfti*.bat examples.
     #
     #Mandatory for D5.3+
     #NMD_BACKUP_FTI_QUIESCE=nsrnmdftiq.bat
     #NMD_BACKUP_FTI_UNQUIESCE=nsrnmdftiu.bat
     #Used for D5.3+ to get InstallProfile.xml FTI file in multinode
     #discovery.
     #Optional, if not specified, will treat as single-node FTI.
     #NMD_FTI_GET_INSTPROF=nsrnmdfti_instprof.bat
     #Mandatory for D5.3+. No spaces in paths or around comma separators.
     #For remote FTI, paths must be valid at the FTI host.
     #NMD_FTI_SUBDIRS=F:\Documentum_idx\data\fulltext\fixml,F:\Documentum_idx
     #\data\fulltext\index
     ################################################
     #Mandatory. No spaces in paths or before comma
     #separators in NMD_ICF_SUBDIRS_xxx:
     #NMD_ICF_INCLUDED=yes
     #NMD_ICF_SUBDIRS=C:\Documentum\dba,C:\Documentum\product\5.3
     ################################################
     NMD_FILEREPORT_INCLUDED=yes
     NMDDE_METADATA_OUTPUT_DEST=C:\docbase_freports\
     ################################################
     #Other misc recommended NMD_xxx parameters
     #Recommended to get more meaningful saveset names
     NMD_USE_DEFAULT_SAVESET_NAMES=yes
     #Use following to skip unwanted ICF, FTI and non-SnapImage SA dirs/files.
     #For example, "<</>> +skip: dm_ftwork_dir" line will skip non-data
     #files.
     #
     #The path will be the same and must exist on D5.3+, remote FTI host, and
     #RCS hosts correspondingly if used.
     #NMD_DIRECTIVES_FILE=E:\Program Files\Legato\nsr\res\nsrnmddirectives.txt
     #For non-SnapImage SA backup
     #NMD_SA_FULL_NUM_SAVESET=16
     #NMD_SA_INCR_NUM_SAVESET=4
     #NMD_USE_SNAPIMAGE=yes
     ################################################
     # DSA setup
     ################################################
     # Name of the config file at the remote sites;
     # Mandatory, listed in the config file at the primary host.
     # (if skipped, backup is treated as local)
     # NMD_RCS_CFG_FILE=rep_name_rcs.cfg
    
     # SA-host mapping add, optional, will override far-store list info.
     # No space around comma.
     # NMD_HOST_SAS_MAP=host01,sa_01,sa_02
     # NMD_HOST_SAS_MAP=host02,sa_03
     ################################################
     NSR_SERVER=con-dctm
     #NSR_CLIENT=d5svrhost
     NSR_GROUP=Default
     NSR_DATA_VOLUME_POOL=Default
     #NSR_SNAPIMAGE_DATA_VOLUME_POOL=Default
     #Relocation dir will be the same on D5+ and remote FTI/SA hosts.
     NSR_RELOCATION=C:\reloc
     #NSR_PARALLELISM=16
     NSR_DEBUG_FILE=C:\Program Files\Legato\nsr\applogs\nmd.log
     NSR_DEBUG_LEVEL=9
     ################################################
     NMDDE_DM_PASSWD=XAtup9pl
    

    구성 파일 암호 필드를 유지합니다. NMDDE_DM_PASSWD 비어 있습니다. 다음 단계에서 암호를 설정합니다.

  3. 다음과 같이 구성 파일 암호를 설정합니다.

    • 명령 프롬프트를 열고 을 [NetWorker_root]\Legato\nsr\bin
    • 다음 명령을 실행합니다. -nsrnmdsv.exe -f<path_to_cfg_file> -P <password>
  4. 데이터베이스를 백업하는 데 사용되는 실행 가능한 일괄 처리(.bat) 파일을 만듭니다. 자세한 내용은 NetWorker 설명서를 참조하십시오. 설치에 따라 배치 파일에 세부 사항을 설정합니다.

    • 전체 데이터베이스 백업(nsrnmdbf.bat):

      [NetWorker_database_module_root] -s<networker_server_name> -U[사용자 이름​]-P[암호] -l full<database_name>

    • 증분 데이터베이스 백업(nsrnmdbi.bat):

      [NetWorker_database_module_root] -s<networker_server_name> -U[사용자 이름​]-P[암호] -l 1 -R<database_name>

    • 데이터베이스 로그 백업(nsrnmddbbl.bat):

      [NetWorker_database_module_root] -s<networker_server_name> -U[사용자 이름​]-P[암호] -l incr -R<database_name>

      위치:

      [NetWorker_database_module_root] 은 NetWorker 모듈의 설치 디렉토리입니다. 예를 들어 NetWorker Module for SQL Server의 기본 설치 디렉토리는 C:\Program Files\Legato\nsr\bin\nsrsqlsv 입니다.

      NetWorker_Server_Name 은 NetWorker가 설치된 서버입니다.

      username & password 데이터베이스 관리자 사용자의 사용자 이름 및 암호입니다.

      database_name 은 백업할 데이터베이스의 이름입니다.

백업 장치 만들기

  1. EMC Documentum 서버에 새 디렉토리를 만들고 모든 사용자에게 전체 권한을 부여하여 폴더를 공유합니다.

  2. EMC NetWorker Administrator 를 시작하고 Media Management > Devices 를 클릭합니다.

  3. 장치 를 마우스 오른쪽 단추로 클릭하고 만들기 를 선택합니다.

  4. 다음 값을 입력하고 확인을 누릅니다.

    이름: 공유 디렉토리의 전체 경로

    미디어 유형: File

  5. 새 장치를 마우스 오른쪽 단추로 클릭하고 작업을 선택합니다.

  6. 레이블 을 클릭하고 이름을 입력한 다음 확인 을 클릭한 다음 마운트 를 클릭합니다.

백업된 파일을 저장할 장치가 추가됩니다. 다양한 형식의 여러 장치를 추가할 수 있습니다.

EMC Documentum Content Server 백업 back-up-the-emc-documentum-content-server

AEM Forms 데이터의 전체 백업을 완료한 후 다음 작업을 수행합니다. (자세한 내용은 AEM Forms 데이터 백업)

NOTE
명령 스크립트는에서 생성한 nsrnmd_win.cfg 파일의 전체 경로를 필요로 합니다 백업 및 복구를 위한 EMC Document Content Server 준비.
  1. 명령 프롬프트를 열고 을 [NetWorker_root]\Legato\nsr\bin

  2. 다음 명령을 실행합니다.

    code language-as3
     - nsrnmdsv.exe -f <path_to_cfg_file>
    

EMC Documentum Content Server 복구 restore-the-emc-documentum-content-server

AEM 양식 데이터를 복원하기 전에 다음 작업을 수행하십시오. (자세한 내용은 AEM 양식 데이터 복구)

NOTE
명령 스크립트는에서 생성한 nsrnmd_win.cfg 파일의 전체 경로를 필요로 합니다 백업 및 복구를 위한 EMC Document Content Server 준비.
  1. 복원할 Docbase 서비스를 중지합니다.

  2. 데이터베이스 모듈에 대한 NetWorker User 유틸리티를 시작합니다(예: NetWorker User for SQL Server).

  3. 복원 도구를 클릭한 다음 [일반]을 선택합니다.

  4. 화면 왼쪽에서 Docbase에 대한 데이터베이스를 선택하고 도구 모음에서 시작 단추를 클릭합니다.

  5. 데이터베이스가 복원되면 Docbase 서비스를 다시 시작합니다.

  6. 명령 프롬프트를 열고 을 [NetWorker_root]\Legato\nsr\bin

  7. 다음 명령을 실행합니다.

    code language-as3
     - nsrnmdrs.exe -B <docbase_name> -f <path_to_cfg_file> -C SA
    
recommendation-more-help
a6ebf046-2b8b-4543-bd46-42a0d77792da