SEO and URL Management Best Practices for Adobe Experience Manager as a Cloud Service seo-and-url-management-best-practices-for-aem

Search Engine Optimization (SEO) has become a key concern for many marketers. As a result, SEO concerns need to be addressed on many Adobe Experience Manager (AEM) as a Cloud Service projects.

This document first describes some SEO best practices and recommendations for achieving these on an AEM as a Cloud Service implementation. Then, this document takes a deeper dive into some of the more complex implementation steps raised in the first section.

SEO Best Practices seo-best-practices

This section describes some general SEO best practices.

URLs urls

There are some accepted best practices in URLs.

In your AEM project, when evaluating your URLs, ask yourself the following:

“If a user sees this URL and none of the content on the page, could they describe what this page was about?”

If the answer is yes, then it is likely that the URL works well for a search engine.

Here are some general tips on how to construct your URLs for SEO:

  • Use hyphens to separate words.

    • Name pages using hyphens (-) as separators.
    • Avoid using camel case, underscores, and spaces.
  • Avoid the use of query parameters when possible. When necessary, limit them to two or less.

    • Use the directory structure to indicate information architecture, when available.
    • If a directory structure is not an option, use Sling selectors in the URL rather than query strings. In addition to the SEO value that they provide, sling selectors make the pages cacheable for the Dispatcher.
  • The more human-readable a URL is, the better; having keywords present in the URL boosts value.

    • When using selectors on a page, selectors that provide semantic value are preferred.
    • If a human cannot read your URL, a search engine cannot either.
    • For example:
      is preferred to
  • Avoid subdomains whenever possible, as search engines treat them as different entities, fragmenting the SEO value of the site.

    • Instead use first-level sub paths. For example, instead of, use

    • Plan your content hierarchy to match the way the content is presented, according to this guideline.

  • Keyword effectiveness in URLs decreases as the length of the URL and the position of the keyword increases. In other words, shorter is better.

    • Use URL shortening techniques and features provided by AEM to remove unnecessary URL pieces.
    • For example, is preferred to
  • Use canonical URLs.

    • When a URL can be served from different paths or with different parameters or selectors, make sure to use a rel=canonical tag on the page.

    • This can be included in the code for the AEM template.

  • Match URLs to page titles whenever possible.

    • Content authors should be encouraged to follow this practice.
  • Support case insensitivity in URL requests.

    • Configure the Dispatcher to rewrite all inbound requests as lowercase letters.
    • Train content authors to create all pages using lowercase letters.
  • Make sure that each page is only served from one protocol.

    • Sometimes sites are served over http until a user reaches a page with, for example, a checkout or login form, at which point it switches to https. When linking from this page, if the user can return to http pages and access them through https, the search engine tracks these as two separate pages.

    • Google currently prefers https pages to http ones. For this reason, it often makes everyone’s life easier to serve the whole site over https.

Server configuration server-configuration

In terms of server configuration, you can take the following steps to ensure that only the correct content is being crawled:

  • Use a robots.txt file to block crawling of any content that should not be indexed.

    • Block all crawling on test environments.
  • When launching a new site with updated URLs, implement 301 redirects to ensure that your existing SEO ranking is not lost.

  • Include a favicon for your site.

  • Implement an XML sitemap to make it easier for search engines to crawl your content. Make sure to include a mobile sitemap for mobile and/or responsive sites.

AEM Configurations aem-configurations

This section describes the implementation steps needed to configure AEM to follow these SEO recommendations.

Using Sling selectors using-sling-selectors

Previously, using query parameters was the accepted practice when building an enterprise web application.

The trend in recent years has been to remove these so that URLs are more readable. On many platforms, this involves implementing redirects on the web server or Content Delivery Network (CDN), but Sling makes this straightforward. Sling selectors:

  • Improve URL readability.
  • Let you cache your pages on the Dispatcher, often improving security.
  • Allow you to address the content directly, rather than having a generic servlet that retrieves content. This grants you the benefits of ACLs that you apply to your repository and filters that you apply on the Dispatcher.

Using selectors for servlets using-selectors-for-servlets

AEM provides us with two options when writing servlets:

  • bin servlets
  • Sling servlets

The following examples illustrate how to register servlets that follow both of these patterns and the benefit gained by using Sling servlets.

Bin servlets (one level down) bin-servlets-one-level-down

Bin servlets follow the pattern that many developers are used to from J2EE programming. The servlet is registered at a specific path, which in the case of AEM is usually under /bin, and you extract the needed request parameters from the query string.

The SCR annotation for this type of servlet would look something like this:

@SlingServlet(paths = "/bin/myApp/myServlet", extensions = "json", methods = "GET")

You then extract the parameters from the query string via the SlingHttpServletRequest object that is included in the doGet method; for example:

String myParam = req.getParameter("myParam");

The resulting URL used would look something like this:

There are a few points to be considered with this approach:

  • The URL itself loses SEO value. Users accessing the site, including search engines, do not receive any semantic value from the URL, as the URL represents a programmatic path and not the content hierarchy.
  • The presence of query parameters in the URL means that the Dispatcher will not be able to cache the response.
  • If you want to secure this servlet, you need to implement your own custom security logic in the servlet.
  • The Dispatcher must be configured (carefully) to expose /bin/myApp/myServlet. Simply exposing /bin would allow access to certain servlets that should not be open to site visitors.

Sling servlets (one level down) sling-servlets-one-level-down

Sling servlets let you register your servlet in the opposite manner. Rather than addressing a servlet and specifying the content you would like the servlet to render based on the query parameters, you address the content that you want and specify the servlet that should render the content based on Sling selectors.

The SCR annotation for this type of servlet would look something like this:

@SlingServlet(resourceTypes = "myBrand/components/pages/myPageType", selectors = "myRenderer", extensions = "json", methods="GET")

In this case, the resource that the URL addresses (an instance of the myPageType resource) is accessible in the servlet automatically. To access it, you call:

Resource myPage = req.getResource();

The resulting URL used would look something like this:

The benefits to this approach are:

  • You can bake in the SEO value, gained by the semantics present in your site hierarchy and page name.
  • Since no query parameters are present, the Dispatcher can cache the response. Also, any updates made to the addressed page invalidates this cache when the page is activated.
  • All ACLs applied to /content/my-brand/my-page come into effect when a user tries to access this servlet.
  • The Dispatcher will already be configured to serve this content as a function of serving the website. No additional configuration is required.

URL rewriting url-rewriting

In AEM, all of your web pages are stored under /content/my-brand/my-content. While this may be useful from the perspective of repository data management, it is not necessarily how you want your customers to see your site and may conflict with the SEO guidance to keep URLs as short as possible. Also, you may be serving multiple websites from the same AEM instance and from different domain names.

This section reviews the options available in AEM for managing these URLs and presenting them to users in a more readable and SEO-friendly manner.

Vanity URLs vanity-urls

If an author wants a page to be accessible from a second location for promotional purposes, AEM’s vanity URLs, defined on a page-by-page basis, might be useful. To add a vanity URL for a page, navigate to it in the Sites console and edit the page properties. At the bottom of the Basic tab, you see a section where vanity URLs can be added. Keep in mind that having the page accessible via more than one URL will fragment the SEO value of the page, so a canonical URL tag should be added to the page to avoid this issue.

Localized page names localized-page-names

You may want to display localized page names to users of translated content. For example:

  • Rather than having a Spanish-speaking user navigate to:

  • It would be better for the URL to be:

The challenge with localizing the name of the page is that many of the localization tools available on the AEM platform rely on having the page names match across locales to keep the content synchronized.

The sling:alias property lets you have our cake and eat it too. sling:alias can be added as a property to any resource to allow for an alias name for the resource. In the previous example, you would have:

  • A page in the JCR at:

  • Then add a property to it:
    sling:alias = casa

This would allow the AEM translation tools such as the multi-site manager to continue to maintain a relationship between:

  • /en/home

  • /es/home

While also allowing end users to interact with the page name in their native languages.

The sling:alias property can be set using the Alias property when editing Page Properties.

/etc/map etc-map

In a standard AEM installation:

  • for the OSGi configuration
    Apache Sling Resource Resolver Factory

  • the property
    Mapping Location (

  • defaults to /etc/map.

Mapping definitions can be added in this location to map inbound requests, rewrite URLs on pages in AEM, or both.

To create a mapping, create a sling:Mapping node in this location under /http or /https. Based on the sling:match and sling:internalRedirect properties that are set on this node, AEM will redirect all traffic for the matched URL to the value specified in the internalRedirect property.

While this is the approach that is documented in the official AEM and Sling documentation, the regular expression support provided by this implementation is limited in scope when compared to the options that are available to us by using the SlingResourceResolver directly. Also, implementing mappings in this way can lead to issues with Dispatcher cache invalidation.

Here is an example of how this issue occurs:

  1. A user visits your website and requests

  2. The Dispatcher forwards this request to the publish server.

  3. Using /etc/map, the publish server resolves this request to /content/my-brand/my-page and renders the page.

  4. The Dispatcher caches the response at /my-page.html and returns the response to the user.

  5. A content author changes this page and activates it.

  6. The Dispatcher flush agent sends an invalidation request for /content/my-brand/my-page. Because the Dispatcher does not have a page cached at this path, the old content remains cached and stale.

There are ways to configure custom dispatch-flush rules that map the shorter URL to the longer URL for purposes of cache invalidation.

However, there is also a simpler way to manage this:

  1. SlingResourceResolver Rules

    Using the web console (for example, localhost:4502/system/console/configMgr) you can configure the Sling Resource Resolver:

    • Apache Sling Resource Resolver Factory

    It is recommended that you build out the mappings required to shorten URLs as regular expressions, then define these configurations under an OsgiConfignode, config.publish, that is included in your build.

    Rather than defining your mappings in /etc/map, they can be assigned directly to the property URL Mappings ( resource.resolver.mapping):

    code language-xml

    In this simple example, you are removing /content/my-brand/ from the beginning of any URL where it is present.

    This would convert a URL:

    • from /content/my-brand/my-page.html
    • to just /my-page.html

    This is in line with the recommended practice of keeping URLs as short as possible.

  2. Mapping URL Output on Pages

    After you have defined your mappings in the Apache Sling Resource Resolver, you need to use these mappings in your components to ensure that the URLs you output on your pages are short and tidy. You can do this by using the map function of the ResourceResolver.

    For example, if you were implementing a custom navigation component that lists out the children of the current page, you can use the mapping method like so:

    code language-none
    for (Page child : children) {
      String childUrl =, child.getPath());
      //Output the childUrl on the page here

Apache HTTP Server mod_rewrite apache-http-server-mod-rewrite

So far, you have implemented mappings together with the logic in your components to use these mappings when outputting URLs onto our pages.

The final piece to the puzzle is handling these shortened URLs when they come in to the Dispatcher, which is where mod_rewrite comes into play. The largest benefit to using mod_rewrite is that the URLs are mapped back to their long form before they are sent to the Dispatcher module. This means that the Dispatcher requests the long URL from the publish server and cache it accordingly. Therefore, any Dispatcher flushes that come in from the publish server are able to successfully invalidate this content.

To implement these rules, you can add RewriteRule elements under your virtual host in the Apache HTTP Server configuration. If you want to expand the shortened URLs from the earlier example, you can implement a rule that looks like this:

<VirtualHost *:80>
  RewriteEngine on
  RewriteRule ^/(.*)$ /content/my-brand/$1 [PT,L]

Canonical URL tags canonical-url-tags

Canonical URL tags are link tags placed into the head of an HTML document to clarify how search engines should treat a page while indexing the content. The benefit they offer is to ensure that (different versions of) a page are indexed as the same even when the URL to the page may contain differences.

For example, if a site were to offer a printer-friendly version of a page, a search engine would potentially index this page separately from the regular version of the page. The canonical tag tells the search engine that they are the same.


  • <>
  • <>

Both would apply the following tag to the head of the page:

<link rel="canonical" href="my-brand/my-page.html"/>

The href can be relative or absolute. The code should be included in the page markup to determine the canonical URL for the page and output this tag.

Configuring the Dispatcher for case insensitivity configuring-the-dispatcher-for-case-insensitivity

The best practice is to serve all pages using lowercase letters. However, you do not want a user to get a 404 when they access your website using uppercase letters in their URL. For this reason, Adobe recommends that you add a rewrite rule in the Apache HTTP Server configuration to map all incoming URLs to lowercase. Also, content authors must be trained to create their pages with lowercase names.

To configure Apache to force all inbound traffic to lowercase, add the following to the vhost config:

RewriteEngine On
RewriteMap lowercase int:tolower

Also, add the following to the top of the htaccess file:

RewriteCond $1 [A-Z]
RewriteRule ^(.*)$ /${lowercase:$1} [R=301,L]

Implementing robots.txt to protect development environments implementing-robots-txt-to-protect-development-environments

Search engines should check for the presence of a robots.txt file at your site root before crawling your site. While major search engines such as Google, Yahoo, or Bing all respect this, some foreign search engines do not.

The simplest way to block access to your entire site is to place a file named robots.txt at the site root with the following content:

User-agent: *
Disallow: /

Alternately, on a live environment, you could choose to disallow certain paths that you do not want indexed.

The caveat with placing the robots.txt file at the site root is that Dispatcher flush requests may clear out this file and URL mappings likely place the site root somewhere different from the DOCROOT as defined in the Apache HTTP Server configuration. For this reason, it is common to place this file on the author instance at the site root and replicate it to the publish instance.

Building an XML sitemap on AEM building-an-xml-sitemap-on-aem

Crawlers use XML sitemaps to better understand the structure of websites. While there is no guarantee that providing a sitemap leads to improved SEO rankings, it is an agreed-upon best practice. You can manually maintain an XML file on the web server to use as the sitemap, but it is recommended to generate the sitemap programmatically, which ensures that as authors create content, the sitemap will automatically reflect their changes.

AEM uses the Apache Sling Sitemap module to generate XML sitemaps, which provides a wide range of options for developers and editors to keep a sites XML sitemap up to date.

The Apache Sling Sitemap module distinguishes between a top-level sitemap and a nested sitemap, both being generated for any resource that has the sling:sitemapRoot property set to true. In general, sitemaps are rendered using selectors at the path of the tree’s top-level sitemap, which is the resource that has no other sitemap root ancestor. This top-level sitemap root also exposes the sitemap index, which normally is what a site owner would configure in the Search Engine’s configuration portal or add to the site’s robots.txt.

For example, consider a site that defines a top-level sitemap root at my-page and a nested sitemap root at my-page/news, to generate a dedicated sitemap for pages in the news subtree. The resulting, relevant urls would be

  • <>
  • <>
  • <>
The selectors sitemap and sitemap-index may interfere with custom implementations. If you do not want to use the product feature, configure your own servlet serving these selectors with a service.ranking higher than 0.

In the default configuration, the Page Properties Dialog provides an option to mark a Page as a sitemap root and so, as described above, generate a sitemap of itself and its descendants. This behavior is implemented by implementations of the SitemapGenerator interface and may be extended by adding alternative implementations. However, as the frequency on which to regenerate the XML sitemaps highly depends on the content authoring workflows and workloads, the product does not ship any SitemapScheduler configuration. This makes the feature effectively opt-in.

To enable the background job that generates the XML sitemaps a SitemapScheduler must be configured. To do so, create an OSGI configuration for the PID The scheduler expression 0 0 0 * * ? can be used as a starting point to regenerate all XML sitemaps once a day at midnight.

Apache Sling Sitemap - Scheduler

The sitemap generation job can run on both, author and publish tier instances. In most cases, it is recommended to run the generation on publish tier instances, as proper canonical URLs can be generated only there (due to the Sling Resource Mapping rules commonly being present only on publish tier instances). However, it is possible to plug-in a custom implementation of the externalization mechanism used to generate the canonical URLs by implementing the SitemapLinkExternalizer interface. If a custom implementation is able to generate the canonical URLs of a sitemap on the author tier instances, the SitemapScheduler can be configured for the author run mode and the XML sitemap generation workload could be distributed across the instances of the author service cluster. In this scenario, particular caution must be spent on handling content that has not yet been published, has been modified or is only visible to a restricted group of users.

AEM Sites contains a default implementation of a SitemapGenerator that traverses a tree of pages to generate a sitemap. It is pre-configured to only output the canonical URLs of a site and any language alternatives if available. It can also be configured to include the last modified date of a page if needed. For that, enable the Add Last Modified option of the Adobe AEM SEO - Page Tree Sitemap Generator Configuration and select a Last Modified Source. When the Sitemaps are generated on the publish tier, it is recommended to use the cq:lastModified date.

Adobe AEM SEO - Page Tree Sitemap Generator Configuration

To limit the content of a sitemap, the following service interfaces can be implemented when needed:

If the default implementations do not work of a particular use case or if the extension points are not flexible enough, a custom SitemapGenerator may be implemented to take full control of the content of a generated sitemap. The following example shows how this can be done, making use of the default implementation’s logic for AEM Sites. It uses the ResourceTreeSitemapGenerator as a starting point to traverse a tree of pages:

import java.util.Optional;

import org.jetbrains.annotations.NotNull;
import org.osgi.service.component.annotations.Component;
import org.osgi.service.component.annotations.Reference;
import org.slf4j.Logger;
import org.slf4j.LoggerFactory;

import com.adobe.aem.wcm.seo.sitemap.PageTreeSitemapGenerator;

    service = SitemapGenerator.class,
    property = { "service.ranking:Integer=20" }
public class SitemapGeneratorImpl extends ResourceTreeSitemapGenerator {

    private static final Logger LOG = LoggerFactory.getLogger(SitemapGeneratorImpl.class);

    private SitemapLinkExternalizer externalizer;
    private PageTreeSitemapGenerator defaultGenerator;

    protected void addResource(@NotNull String name, @NotNull Sitemap sitemap, Resource resource) throws SitemapException {
        Page page = resource.adaptTo(Page.class);
        if (page == null) {
            LOG.debug("Skipping resource at {}: not a page", resource.getPath());
        String location = externalizer.externalize(resource);
        Url url = sitemap.addUrl(location + ".html");
        // add any additional content to the Url like lastmod, change frequency, and so on

    protected final boolean shouldFollow(@NotNull Resource resource) {
        return super.shouldFollow(resource)
            && Optional.ofNullable(resource.adaptTo(Page.class)).map(this::shouldFollow).orElse(Boolean.TRUE);

    private boolean shouldFollow(Page page) {
        // add additional conditions to stop traversing some pages
        return !defaultGenerator.isProtected(page);

    protected final boolean shouldInclude(@NotNull Resource resource) {
        return super.shouldInclude(resource)
            && Optional.ofNullable(resource.adaptTo(Page.class)).map(this::shouldInclude).orElse(Boolean.FALSE);

    private boolean shouldInclude(Page page) {
        // add additional conditions to stop including some pages
        return defaultGenerator.isPublished(page)
            && !defaultGenerator.isNoIndex(page)
            && !defaultGenerator.isRedirect(page)
            && !defaultGenerator.isProtected(page);

Furthermore, the functionality implemented for XML sitemaps can be used in different use cases as well, for example, to add the canonical link or the language alternates to a page’s head. See the SeoTags interface for more information.

Creating 301 redirects for legacy URLs creating-redirects-for-legacy-urls

When launching a site with a new structure, implementing and testing 301 redirects in Apache HTTP Server is important for two reasons:

  • The legacy URLs have built up SEO value over time. By implementing a redirect, the search engine can apply this value to the new URL.
  • Users of your site may have created bookmarks to these pages. By implementing redirects, you can be sure to direct the user to the page on the new site that most closely matches where they were trying to get on the old site.

Make sure to check the additional resources section that follows for instructions on implementing 301 redirects and a tool to test that your redirects are working as expected.

Additional Resources additional-resources

For more information, see the following additional resources: