Sicherungs- und Wiederherstellungs-Service API-Schnellstarts backup-and-restore-service-apiquick-starts

Die Beispiele in diesem Dokument gelten nur für eine AEM Forms on JEE-Umgebung.

Für die API des Sicherungs- und Wiederherstellungs-Service ist Java™ API Quick Start (SOAP) verfügbar.

Quick Start: Aufrufen des Sicherungsmodus mit Java

Quick Start: Verlassen des Sicherungsmodus mit Java

AEM Forms-Vorgänge können mit der stark typisierten AEM Forms-API ausgeführt werden, und der Verbindungsmodus sollte auf SOAP festgelegt werden.

NOTE
Quick Starts in der Programmierung mit AEM Forms basieren auf dem Forms-Betriebssystem. Wenn Sie jedoch ein anderes Betriebssystem wie UNIX® verwenden, ersetzen Sie Windows-spezifische Pfade durch Pfade, die vom jeweiligen Betriebssystem unterstützt werden. Wenn Sie einen anderen J2EE-Anwendungs-Server verwenden, müssen Sie ebenfalls sicherstellen, dass Sie gültige Verbindungseigenschaften angeben. Siehe Einstellung von Verbindungseigenschaften.

Quick Start (SOAP-Modus): Aufrufen des Sicherungsmodus über die Java™-API quick-start-soap-mode-entering-backup-mode-using-the-java-api

Das folgende Java™-Code-Beispiel schaltet für zwei Stunden in den Sicherungsmodus mit einer eindeutigen Bezeichnung. Nach Ablauf der Sicherungszeit oder wenn der Sicherungsmodus explizit verlassen wird, kehrt der Formular-Server zur Bereinigung von Dateien aus dem globalen Dokumentenspeicher zurück. (Siehe Aufrufen des Sicherungsmodus auf dem Formular-Server.)

 /*
     * This Java Quick Start uses the SOAP mode and contains the following JAR files
     * in the class path:
     * 1. adobe-backup-restore-client-sdk.jar
     * 2. adobe-livecycle-client.jar
     * 3. adobe-usermanager-client.jar
     * 4. activation.jar (required for SOAP mode)
     * 5. axis.jar (required for SOAP mode)
     * 6. commons-codec-1.3.jar (required for SOAP mode)
     * 7. commons-collections-3.2.jar  (required for SOAP mode)
     * 8. commons-discovery.jar (required for SOAP mode)
     * 9. commons-logging.jar (required for SOAP mode)
     * 10. dom3-xml-apis-2.5.0.jar (required for SOAP mode)
     * 11. jaxen-1.1-beta-9.jar (required for SOAP mode)
     * 12. jaxrpc.jar (required for SOAP mode)
     * 13. log4j.jar (required for SOAP mode)
     * 14. mail.jar (required for SOAP mode)
     * 15. saaj.jar (required for SOAP mode)
     * 16. wsdl4j.jar (required for SOAP mode)
     * 17. xalan.jar (required for SOAP mode)
     * 18. xbean.jar (required for SOAP mode)
     * 19. xercesImpl.jar (required for SOAP mode)
     *
     * The JBoss files must be kept in the jboss\client folder. You can copy the client folder to
     * your local development environment and then include the 3 JBoss JAR files in your class path
     *
     * These JAR files are in the following path:
     * <install directory>/sdk/client-libs/common
     *
     *
     * <install directory>/jboss/bin/client
     *
     * If you want to invoke a remote Forms Server instance and there is a
     * firewall between the client application and the server, then it is
     * recommended that you use the SOAP mode. When using the SOAP mode,
     * you have to include additional JAR files in the following
     * path
     * <install directory>/sdk/client-libs/thirdparty
     *
     * For information about the SOAP
     * mode and the additional JAR files that need to be included,
     * see "Setting connection properties" in Programming
     * with AEM Forms
     *
     * For complete details about the location of the AEM Forms JAR files,
     * see "Including AEM Forms Java library files" in Programming
     * with AEM Forms
     */
 import java.util.Properties;

 import com.adobe.idp.backup.dsc.client.BackupServiceClient;
 import com.adobe.idp.backup.dsc.service.BackupModeEntryResult;
 import com.adobe.idp.dsc.clientsdk.ServiceClientFactory;
 import com.adobe.idp.dsc.clientsdk.ServiceClientFactoryProperties;

 public class BackupRestoreEnter
 {
     public static void main(String[] args)
     {
         try
         {
             // Set connection properties required to invoke AEM Forms
             Properties connectionProps = new Properties();
             connectionProps.setProperty(ServiceClientFactoryProperties.DSC_DEFAULT_SOAP_ENDPOINT, "https://'[server]:[port]'");
             connectionProps.setProperty(ServiceClientFactoryProperties.DSC_TRANSPORT_PROTOCOL, ServiceClientFactoryProperties.DSC_SOAP_PROTOCOL);
             connectionProps.setProperty(ServiceClientFactoryProperties.DSC_SERVER_TYPE, ServiceClientFactoryProperties.DSC_JBOSS_SERVER_TYPE);
             connectionProps.setProperty(ServiceClientFactoryProperties.DSC_CREDENTIAL_USERNAME,"administrator");
             connectionProps.setProperty(ServiceClientFactoryProperties.DSC_CREDENTIAL_PASSWORD, "password");

             // Create a ServiceClientFactory instance
             ServiceClientFactory myFactory = ServiceClientFactory.createInstance(connectionProps);

             // Create a BackupService client object
             BackupServiceClient backup = new BackupServiceClient(myFactory);

             // Specify a generic label, 120 minutes to perform the backup,
             // and not to provide continous backup mode coverage (used for snapshot backups)
             String backUpLabel = new String("Snapshot2008July01");
             int minsInBackupMode = 120;
             boolean continousCoverage = false;


             // Enter backup mode on the Forms Server server
             BackupModeEntryResult backupResult = backup.enterBackupMode(backUpLabel,minsInBackupMode, continousCoverage);

             // Get information from entering backup mode on the Forms Server server.
             if (backupResult != null)
             {
                 System.out.println("Start time is: " + backupResult.getStartTime());
                 System.out.println("Backup Current ID is: " + backupResult.getId());
                 System.out.println("Backup Previous ID is: " + backupResult.getPreviousReservationId());
                 System.out.println("Backup Label is: " + backupResult.getLabel());
                 System.out.println("Backup Time to complete is: " + backupResult.getReservationTimeout());
             }
             else
             {
                 System.out.println("Could not enter backup mode.");
             }

         }
         catch (Exception e)
         {
             e.printStackTrace();
         }
         return;
     }
 }

Quick Start (SOAP-Modus): Verlassen des Sicherungsmodus über die Java™-API quick-start-soap-mode-leaving-backup-mode-using-the-java-api

Das folgende Java™-Code-Beispiel veranlasst einen Formular-Server explizit, den Sicherungsmodus zu verlassen und zum Löschen von Dateien aus dem globalen Dokumentenspeicher zurückzukehren. (Siehe Verlassen des Sicherungsmodus auf dem Formular-Server.)

 /*
     * This Java Quick Start uses the SOAP mode and contains the following JAR files
     * in the class path:
     * 1. adobe-backup-restore-client-sdk.jar
     * 2. adobe-livecycle-client.jar
     * 3. adobe-usermanager-client.jar
     * 4. activation.jar (required for SOAP mode)
     * 5. axis.jar (required for SOAP mode)
     * 6. commons-codec-1.3.jar (required for SOAP mode)
     * 7. commons-collections-3.2.jar  (required for SOAP mode)
     * 8. commons-discovery.jar (required for SOAP mode)
     * 9. commons-logging.jar (required for SOAP mode)
     * 10. dom3-xml-apis-2.5.0.jar (required for SOAP mode)
     * 11. jaxen-1.1-beta-9.jar (required for SOAP mode)
     * 12. jaxrpc.jar (required for SOAP mode)
     * 13. log4j.jar (required for SOAP mode)
     * 14. mail.jar (required for SOAP mode)
     * 15. saaj.jar (required for SOAP mode)
     * 16. wsdl4j.jar (required for SOAP mode)
     * 17. xalan.jar (required for SOAP mode)
     * 18. xbean.jar (required for SOAP mode)
     * 19. xercesImpl.jar (required for SOAP mode)
     *
     * The JBoss files must be kept in the jboss\client folder. You can copy the client folder to
     * your local development environment and then include the 3 JBoss JAR files in your class path
     *
     * These JAR files are in the following path:
     * <install directory>/sdk/client-libs/common
     *
     *
     * <install directory>/jboss/bin/client
     *
     * If you want to invoke a remote Forms Server instance and there is a
     * firewall between the client application and the server, then it is
     * recommended that you use the SOAP mode. When using the SOAP mode,
     * you have to include additional JAR files in the following
     * path
     * <install directory>/sdk/client-libs/thirdparty
     *
     * For information about the SOAP
     * mode and the additional JAR files that need to be included,
     * see "Setting connection properties" in Programming
     * with AEM Forms
     *
     * For complete details about the location of the AEM Forms JAR files,
     * see "Including AEM Forms Java library files" in Programming
     * with AEM Forms
     */
 import java.util.Properties;

 import com.adobe.idp.backup.dsc.client.BackupServiceClient;
 import com.adobe.idp.backup.dsc.service.BackupModeResult;
 import com.adobe.idp.dsc.clientsdk.ServiceClientFactory;
 import com.adobe.idp.dsc.clientsdk.ServiceClientFactoryProperties;

 public class BackupRestoreLeave
 {

     public static void main(String[] args)
     {
         try
         {
             //Set connection properties required to invoke AEM Forms
             Properties connectionProps = new Properties();
             connectionProps.setProperty(ServiceClientFactoryProperties.DSC_DEFAULT_SOAP_ENDPOINT, "https://'server':`port`");
             connectionProps.setProperty(ServiceClientFactoryProperties.DSC_TRANSPORT_PROTOCOL, ServiceClientFactoryProperties.DSC_SOAP_PROTOCOL);
             connectionProps.setProperty(ServiceClientFactoryProperties.DSC_SERVER_TYPE, ServiceClientFactoryProperties.DSC_JBOSS_SERVER_TYPE);
             connectionProps.setProperty(ServiceClientFactoryProperties.DSC_CREDENTIAL_USERNAME,"administrator");
             connectionProps.setProperty(ServiceClientFactoryProperties.DSC_CREDENTIAL_PASSWORD, "password");

             // Create a ServiceClientFactory instance
             ServiceClientFactory myFactory = ServiceClientFactory.createInstance(connectionProps);

             // Create a BackupService object
             BackupServiceClient backup = new BackupServiceClient(myFactory);

             // Leave backup mode on the Forms Server
             BackupModeResult leaveBackupResult = backup.leaveBackupMode();

             //Get result information from leaving backup mode
             if (leaveBackupResult != null)
             {
                 System.out.println("Backup Mode ID is : " + leaveBackupResult.getId());
             }
             else
             {
                 System.out.println("Forms server is not in backup mode.");
             }

         }
         catch (Exception e)
         {
             e.printStackTrace();
         }
         return;
     }
 }
recommendation-more-help
19ffd973-7af2-44d0-84b5-d547b0dffee2