DocumentationCommerceInstallation Guide

PHP settings

Last update: Tue Apr 16 2024 00:00:00 GMT+0000 (Coordinated Universal Time)

CREATED FOR:

  • Experienced
  • Admin
  • Developer

This topic discusses how to set required PHP options.

NOTE
The latest version of Adobe Commerce requires a minimum of PHP 8.1. See system requirements for all supported versions of PHP.

For Cloud configuration guidance, see PHP settings in the Commerce on Cloud Infrastructure guide.

PHP Process Control

Before you can run indexers in parallel mode, you must enable Process Control support (pcntl) in PHP. See Installation in the PHP documentation.

Verify PHP is installed

PHP is installed by default on most Linux distributions. This topic assumes that you have already installed PHP. To verify if PHP is installed, enter the following on the command line:

php -v

If PHP is installed, a message similar to the following displays:

PHP 8.1.2-1ubuntu2.14 (cli) (built: Aug 18 2023 11:41:11) (NTS)
Copyright (c) The PHP Group
Zend Engine v4.1.2, Copyright (c) Zend Technologies
    with Zend OPcache v8.1.2-1ubuntu2.14, Copyright (c), by Zend Technologies

If PHP is not installed (or requires an upgrade), install it by following the instructions for your Linux distribution.

Verify installed extensions

Adobe Commerce requires certain PHP extensions. The following lists specify required extensions for each edition of Commerce. The lists are autogenerated from a deployment running the latest version of each edition.

Adobe Commerce requires:

  • ext-bcmath
  • ext-ctype
  • ext-curl
  • ext-dom
  • ext-fileinfo
  • ext-filter
  • ext-gd
  • ext-hash
  • ext-iconv
  • ext-intl
  • ext-json
  • ext-libxml
  • ext-mbstring
  • ext-openssl
  • ext-pcre
  • ext-pdo_mysql
  • ext-simplexml
  • ext-soap
  • ext-sockets
  • ext-sodium
  • ext-spl
  • ext-tokenizer
  • ext-xmlwriter
  • ext-xsl
  • ext-zip
  • ext-zlib
  • lib-libxml

B2B for Adobe Commerce requires:

  • ext-bcmath
  • ext-ctype
  • ext-curl
  • ext-dom
  • ext-fileinfo
  • ext-filter
  • ext-gd
  • ext-hash
  • ext-iconv
  • ext-intl
  • ext-json
  • ext-libxml
  • ext-mbstring
  • ext-openssl
  • ext-pcre
  • ext-pdo_mysql
  • ext-simplexml
  • ext-soap
  • ext-sockets
  • ext-sodium
  • ext-spl
  • ext-tokenizer
  • ext-xmlwriter
  • ext-xsl
  • ext-zip
  • ext-zlib
  • lib-libxml

Magento Open Source requires:

  • ext-bcmath
  • ext-ctype
  • ext-curl
  • ext-dom
  • ext-fileinfo
  • ext-filter
  • ext-gd
  • ext-hash
  • ext-iconv
  • ext-intl
  • ext-json
  • ext-libxml
  • ext-mbstring
  • ext-openssl
  • ext-pcre
  • ext-pdo_mysql
  • ext-simplexml
  • ext-soap
  • ext-sockets
  • ext-sodium
  • ext-tokenizer
  • ext-xmlwriter
  • ext-xsl
  • ext-zip
  • ext-zlib
  • lib-libxml

To verify installed extensions:

  1. List installed modules.

    code language-bash 
    php -m

  2. Verify that all required extensions are installed.

  3. Add any missing modules using the same workflow used for installing PHP.

Check PHP settings

WARNING
If you are using PHP 7.4.20, set pcre.jit=0 in your php.ini file. This gets around a PHP bug that prevents CSS from loading.
  • Set the system time zone for PHP; otherwise, errors like the following display during the installation and time-related operations like cron might not work:
PHP Warning:  date(): It is not safe to rely on the system's timezone settings. [more messages follow]

  • Set the PHP memory limit.

    Adobe recommends the following:

    • Compiling code or deploying static assets, 1G
    • Debugging, 2G
    • Testing, ~3-4G

  • Increase the values for the PHP realpath_cache_size and realpath_cache_ttl to recommended settings:

    code language-conf 
    realpath_cache_size=10M
realpath_cache_ttl=7200

    These settings allow PHP processes to cache paths to files instead of looking them up on page load. See Performance Tuning in the PHP documentation.

  • Enable opcache.save_comments, which is required for Adobe Commerce 2.1 and later.

    Adobe recommends enabling the PHP OPcache for performance reasons. The OPcache is enabled in many PHP distributions.

    Adobe Commerce 2.1 and later use PHP code comments for code generation.

NOTE
To avoid issues during installation and upgrade, Adobe strongly recommends that you apply the same PHP settings to both the PHP command-line configuration and the PHP web server plug-in configuration. For more information, see the next section.

Find PHP configuration files

This section discusses how you find the configuration files necessary to update required settings.

Find php.ini configuration file

To find the web server configuration, run a phpinfo.php file in your web browser and look for the Loaded Configuration File as follows:

PHP info page

To locate the PHP command-line configuration, enter

php --ini | grep "Loaded Configuration File"
NOTE
If you have only one php.ini file, change that file. If you have two php.ini files, change both files. Failure to do so might cause unpredictable performance.

Find OPcache configuration settings

PHP OPcache settings are typically located either in php.ini or opcache.ini. The location might depend on your operating system and PHP version. The OPcache configuration file might have an opcache section or settings like opcache.enable.

Use the following guidelines to find it:

  • Apache web server:

    For Ubuntu with Apache, OPcache settings are typically located in the php.ini file.

    For CentOS with Apache or nginx, OPcache settings are typically located in /etc/php.d/opcache.ini

    If not, use the following command to locate it:

    code language-bash 
    sudo find / -name 'opcache.ini'

  • nginx web server with PHP-FPM: /etc/php/8.1/fpm/php.ini

If you have more than one opcache.ini, modify all of them.

How to set PHP options

To set PHP options:

  1. Open a php.ini in a text editor.

  2. Locate your server’s time zone in the available time zone settings

  3. Locate the following setting and uncomment it if necessary:

    code language-conf 
    date.timezone =

  4. Add the time zone setting that you found in step 2.

  5. Change the value of memory_limit to one of the values recommended at the beginning of this section.

    For example,

    code language-conf 
    memory_limit=2G

  6. Add or update the realpath_cache configuration to match the following values:

    code language-conf 
    ;
; Increase realpath cache size
;
realpath_cache_size = 10M

;
; Increase realpath cache ttl
;
realpath_cache_ttl = 7200

  7. Save your changes and exit the text editor.

  8. Open the other php.ini (if they are different) and make the same changes in it.

Set OPcache options

To set opcache.ini options:

  1. Open your OPcache configuration file in a text editor:

    • opcache.ini (CentOS)
    • php.ini (Ubuntu)
    • /etc/php/8.1/fpm/php.ini (nginx web server (CentOS or Ubuntu))

  2. Locate opcache.save_comments and uncomment it if necessary.

  3. Make sure that its value is set to 1.

  4. Save your changes and exit the text editor.

  5. Restart your web server:

    • Apache, Ubuntu: service apache2 restart
    • Apache, CentOS: service httpd restart
    • nginx, Ubuntu and CentOS: service nginx restart

Troubleshooting

See the following Adobe Commerce Support articles for help with troubleshooting PHP problems:

recommendation-more-help
0f8e7db5-0e9c-4002-a5b8-a0088077d995