PayPal Payments Advanced

Customer chooses payment method - During checkout, the customer chooses to pay with PayPal Payments Advanced. The Pay Now button appears instead of the Place Order button.

Pay Now - The customer clicks/taps Pay Now, and a PayPal-hosted form appears. The customer enters the card information, and the card is verified. If successful, the order confirmation page appears.

Pay with PayPal - The form also includes the Pay with PayPal button, which redirects the customer to the PayPal site, where payment can be made with PayPal Express Checkout.

Troubleshooting - If the transaction fails for any reason, an error message appears on the checkout page and the customer is instructed to try again. Any issues are managed by PayPal.

Customer places order - In the final stage of checkout, the customer taps the Place Order button.

PayPal responds - PayPal evaluates the request. If it is found to be valid, PayPal processes the transaction.

Commerce sets order status - Commerce receives response from PayPal, and sets the order status to one of the following:

• Processing - The transaction was successful.
• Pending Payment - The system did not receive any response from PayPal.
• Canceled - The transaction was not successful for some reason
• Suspected Fraud - The transaction did not pass some of the PayPal fraud filters. The system receives the response from PayPal that the transaction is under review by Fraud Service.

Merchant fulfills order - The merchant invoices and ships the order.

Log in to your PayPal business account.

Go to Service Settings > Hosted Checkout Pages > Set Up Menu and complete the following settings:

• AVS: No
• CSC: No
• Enable Secure Token: Yes

Save the settings.

When prompted to create a layout, do the following:

• At the top of the page, click Customize.

• Choose Layout C.

• Click Save and Publish.

Set up another user (recommended by PayPal):

• Log in to your PayPal business account.

• To set up another user, follow the instructions.

• Save the changes.

On the Admin sidebar, go to Stores > Settings > Configuration.

In the left panel, expand Sales and choose Payment Methods.

If your Commerce installation has multiple websites, stores, or views, set Store View to the store view where you want to apply this configuration.

In the Merchant Location section, select the Merchant Country where your business is located.

This setting determines the selection of PayPal Solutions that appear in the configuration.

{width="600" modal="regular"}

Expand PayPal All-in-One Payment Solution and click Configure for Payments Advanced.

{width="600" modal="regular"}

Expand the Required PayPal Settings section, if needed.

{width="600" modal="regular"}

(Optional) Enter the Email Associated with your PayPal Merchant Account.

If you do not have a PayPal account, click Start accepting payments via PayPal.

Enter one of the following credentials that you use to log in to your PayPal merchant account:

• Partner - Your PayPal Partner ID.
• Vendor - Your PayPal user login name.
• User - The ID of another user who is set up on your PayPal account.

Enter the Password that is associated with your PayPal account.

To run test transactions, set Test Mode to Yes.

When testing the configuration in a sandbox, use only credit card numbers that are recommended by PayPal. When you are ready to go to production, return to the configuration and set Test Mode to No.

If your system uses a proxy server to establish the connection to the PayPal system, set Use Proxy to Yes and do the following:

• Enter the IP address of the Proxy Host.

• Enter the port number of the Proxy Port.

  A proxy is used when the server firewall prevents direct access to the PayPal server. In this case, a third-party server is used to relay traffic.

Set Enable this Solution to Yes.

If you want to offer PayPal Credit to your customers, set Enable PayPal Credit to Yes.

Expand the Advertise PayPal Credit section.

{width="600" modal="regular"}

To get your account information, click Get Publisher ID from PayPal and follow the instructions.

Enter your Publisher ID.

Expand the Home Page section.

To place a banner on the page, set Display to Yes.

Set Position to one of the following:

• Header (center)
• Sidebar (right)

Set Size to one of the following:

• 190 x 100
• 234 x 60
• 300 x 50
• 468 x 60
• 728 x 90
• 800 x 66

{width="600" modal="regular"}

Expand the remaining sections and repeat the previous steps:

• Catalog Category Page
• Catalog Product Page
• Checkout Cart Page

Expand the Advertise PayPal PayLater section.

Set Enable PayPal PayLater to Yes.

Expand the Home Page section.

To place a banner on the page, set Display to Yes.

Set Position to one of the following:

• Header (center)
• Sidebar

Set Style Layout to one of the following:

• Text
• Flex

For Style Layout Text only, set Logo Type to one of the following:

• Primary
• Alternative
• Inline
• None

For Style Layout Text only, set Logo Position to one of the following:

• Left
• Right
• Top

For Style Layout Text only, set Text Color to one of the following:

• Black
• White
• Monochrome
• Grayscale

For Style Layout Text only, set Text Size to one of the following:

• 10px
• 11px
• 12px
• 13px
• 14px
• 15px
• 16px

For Style Layout Flex only, set Ratio to one of the following:

• 1x1
• 1x4
• 8x1
• 20x1

For Style Layout Flex only, set Color to one of the following:

• Blue
• Black
• White
• White No Border
• Gray
• Monochrome
• Grayscale

{width="600" modal="regular"}

Expand the remaining sections and repeat the previous steps:

• Catalog Product Page
• Checkout Cart Page
• Checkout Payment Step
• Catalog Category Page

Expand the Basic Settings - PayPal Payments Advanced section, if needed.

{width="600" modal="regular"}

To identify PayPal Payments Advanced during checkout, enter a Title.

It is recommended that you use the title Debit or Credit Card.

If you offer multiple payment methods, enter a number for Sort Order to determine the sequence in which PayPal Payments Advanced appears when listed with other payment methods during checkout.

This number is relative to the other payment methods. (0 = first, 1 = second, 2 = third, and so on.)

Set Payment Action to one of the following:

• Authorization - Approves the purchase, but puts a hold on the funds. The amount is not withdrawn until it is captured by the merchant.
• Sale - The amount of the purchase is authorized and immediately withdrawn from the customer’s account.

Expand the Advanced Settings section.

{width="600" modal="regular"}

Set Payment Applicable From to one of the following:

• All Allowed Countries - Customers from all countries specified in your store configuration can use this payment method.
• Specific Countries - After choosing this option, the Payment from Specific Countries list appears. Hold down the Ctrl key (PC) or the Command key (Mac) and select each country in the list where customers can make purchases from your store.

To write communications with the payment system into the log file, set Debug Mode to Yes.

The log file for PayPal Payments Advanced is payments_payflow_advanced.log.

To enable host authenticity verification, set Enable SSL Verification to Yes.

To allow the customer to correct their entry of the three-digit CVV security code from the back of a credit card, set CVV Entry is Editable to Yes.

To require customers to enter a CVV code, set Require CVV Entry to Yes.

To send a confirmation of the payment to the customer, set Send Email Confirmation to Yes.

To determine the method that is used to exchange information with the PayPal server during a transaction, set the URL method for Cancel URL and Return URL to one of the following:

• GET - (Default) Retrieves information that is the result of a process.
• POST - Provides a block of data, such as data entered into a form, to a data handling process.

The Cancel URL and Return URL refer to the page where the customer returns after completing or canceling the payment part of the checkout process on the PayPal server.

Complete the following sections, as needed for your store:

• Settlement Report Settings
• Frontend Experience Settings

Expand the Settlement Report Settings section.

{width="600" modal="regular"}

For SFTP Credentials, do the following:

• If you have signed up for PayPal’s Secure FTP Server, enter the following SFTP login credentials:

  • Login
  • Password

• To run test reports before going live, set Sandbox Mode to Yes.

• Enter the Custom Endpoint Hostname or IP Address.

  By default, the value is reports.paypal.com.

• Enter the Custom Path where reports are saved.

  By default, the value is /ppreports/outgoing.

To generate reports according to a schedule, complete the Scheduled Fetching settings:

• Set Enable Automatic Fetching to Yes.

• Set Schedule to one of the following:

  • Daily
  • Every 3 Days
  • Every 7 Days
  • Every 10 Days
  • Every 14 Days
  • Every 30 Days
  • Every 40 Days

  PayPal retains each report for 45 days.

• Set Time of Day to the hour, minute, and second when you want the reports to be generated.

Expand the Frontend Experience Settings section.

{width="600" modal="regular"}

Select the PayPal Product Logo that you want to appear in the PayPal block in your store.

The PayPal logos are available in four styles and two sizes:

• No Logo
• We Prefer PayPal (150 x 60 or 150 x 40)
• Now Accepting PayPal (150 x 60 or 150 x 40)
• Payments by PayPal (150 x 60 or 150 x 40)
• Shop Now Using PayPal (150 x 60 or 150 x 40)

To customize the appearance of your PayPal merchant pages:

• Enter the name of the Page Style that you want to apply to your PayPal merchant pages:

  • paypal - Uses the PayPal page style.
  • primary - Uses the page style that you identified as the primary style in your account profile.
  • your_custom_value - Uses a custom payment page style, which is specified in your account profile.

• For Header Image URL, enter the URL of the image that you want to appear in the upper-left corner of the payment page. The maximum file size is 750 pixels wide by 90 pixels high.

• To set the color for your pages, enter the six-character hexadecimal code, without the # symbol, for each of the following:

  • Header Background Color - Background color for the checkout page header.
  • Header Border Color - Color for two-pixel border around the header.
  • Page Background Color - Background color for the checkout page and around the header and payment form.

Expand the Basic Settings - PayPal Express Checkout section.

{width="600" modal="regular"}

For Title, enter a title that identifies this payment method during checkout.

Setting the title to PayPal for each store view is recommended.

If you offer multiple payment methods, enter a number for Sort Order to determine the sequence in which PayPal Express Checkout appears when listed with the other payment methods.

This number is relative to the other payment methods. (0 = first, 1 = second, 2 = third, and so on.)

Set Payment Action to one of the following:

• Authorization - Approves the purchase and puts a hold on the funds. The amount is not withdrawn until it is captured by the merchant.
• Sale - The amount of the purchase is authorized and immediately withdrawn from the customer’s account.

To display the Check out with PayPal button on the product page, set Display on Product Details Page to Yes.

Expand the Advanced Settings section.

{width="600" modal="regular"}

To make PayPal Express Checkout available from both the shopping cart and mini cart, set Display on Shopping Cart to Yes.

Set Payment Applicable From to one of the following:

• All Allowed Countries - Customers from all countries specified in your store configuration can use this payment method.
• Specific Countries |After choosing this option, the Payment from Specific Countries list appears. Hold down the Ctrl key (PC) or the Command key (Mac) and click each country in the list where customers can make purchases from your store.

To write communications with the payment system into the log file, set Debug Mode to Yes.

To enable host authenticity verification, set Enable SSL Verification to Yes.

To display a full summary of the customer’s order by line item from the PayPal site, set Transfer Cart Line Items to Yes.

To allow the customer to complete the transaction from the PayPal site without returning to your store for Order Review, set Skip Order Review Step to Yes.

When complete, click Save Config.