有一個章節的 VOD 播放 vod-playback-with-one-chapter
情境 scenario
此情境中，部分 VOD 內容會標示為章節。
除非另有指定，否則此情境中的網路呼叫與沒有廣告的 VOD 播放情境中的呼叫相同。網路呼叫會同時發生，但裝載不同。
觸發
心率方法
網路呼叫
附註
使用者點按 「播放」
trackSessionStartAnalytics 內容開始、心率內容開始
我們尚未通知 Measurement Library 有前段廣告，因此這些網路呼叫仍完全等同於單一 VoD。
章節開始。
trackEvent:ChapterStart心率章節開始
章節播放的第一個時間格。
trackPlay心率內容播放
當章節內容在主要內容之前播放，Heartbeats 會在章節開始時啟動。
章節播放。
章節心率
章節已完成。
trackEvent:trackChapterComplete心率章節完成
此時已到達章節的結尾。
工作階段已結束。
trackSessionEndSessionEnd 表示已達到檢視工作階段的結尾。即使使用者未持續觀看到媒體完成，仍必須呼叫此 API。參數 parameters
當章節播放開始時，會傳送 Heartbeat Chapter Start 呼叫。如果章節的開頭不符合 10 秒的計時器，Heartbeat Chapter Start 呼叫會延遲幾秒，然後呼叫會進入下一個 10 秒的間隔。
發生此情況時，會以相同的間隔傳出 Content Heartbeat 呼叫。您可以透過檢查事件類型和資產類型來區分這兩者：
心率章節開始
參數
值
附註
s:event:type"chapter_start"s:asset:type"main"s:stream:chapter_*章節資料特定的資料流資訊。
s:meta:*具有特定上下文資料的章節。
程式碼範例、中間的章節 sample-code-chapter-in-the-middle
此情境中，部分 VOD 內容為章節。
Android
如要在 Android 中查看此情境，請設定下列程式碼：
// Set up mediaObject
MediaObject mediaInfo = MediaHeartbeat.createMediaObject(
Configuration.MEDIA_NAME,
Configuration.MEDIA_ID,
Configuration.MEDIA_LENGTH,
MediaHeartbeat.StreamType.VOD
);
HashMap<String, String> mediaMetadata = new HashMap<String, String>();
mediaMetadata.put(CUSTOM_KEY_1, CUSTOM_VAL_1);
mediaMetadata.put(CUSTOM_KEY_2, CUSTOM_VAL_2);
// 1. Call trackSessionStart() when the user clicks Play or if autoplay is used,
// i.e., there is an intent to start playback.
_mediaHeartbeat.trackSessionStart(mediaInfo, mediaMetadata);
......
......
// 2. Call trackPlay() when the playback actually starts, i.e., first frame of the
// ad media is rendered on the screen.
_mediaHeartbeat.trackPlay();
.......
.......
// Chapter
HashMap<String, String> chapterMetadata = new HashMap<String, String>();
chapterMetadata.put(CUSTOM_KEY_1, CUSTOM_VAL_1);
MediaObject chapterDataInfo =
MediaHeartbeat.createChapterObject(CHAPTER_NAME,
CHAPTER_POSITION,
CHAPTER_LENGTH,
CHAPTER_START_TIME);
// 3. Track the MediaHeartbeat.Event.ChapterStart event when the chapter starts to play.
_mediaHeartbeat.trackEvent(MediaHeartbeat.Event.ChapterStart, chapterDataInfo, chapterMetadata);
.......
.......
// 4. Track the MediaHeartbeat.Event.ChapterComplete event when the chapter finishes playing.
_mediaHeartbeat.trackEvent(MediaHeartbeat.Event.ChapterComplete, null, null);
.......
.......
// 5. Call trackComplete() when the playback reaches the end, i.e., completes and finishes playing.
_mediaHeartbeat.trackComplete();
........
........
// 6. Call trackSessionEnd() when the playback session is over. This method must be called even
// if the user does not watch the media to completion.
_mediaHeartbeat.trackSessionEnd();
........
........
iOS
如要在 iOS 中查看此情境，請設定下列程式碼：
when the user clicks Play
ADBMediaObject *mediaObject =
[ADBMediaHeartbeat createMediaObjectWithName:MEDIA_NAME
length:MEDIA_LENGTH
streamType:ADBMediaHeartbeatStreamTypeVOD];
NSMutableDictionary *mediaContextData = [[NSMutableDictionary alloc] init];
[mediaContextData setObject:CUSTOM_VAL_1 forKey:CUSTOM_KEY_1];
[mediaContextData setObject:CUSTOM_VAL_2 forKey:CUSTOM_KEY_2];
// 1. Call trackSessionStart when the user clicks Play or if autoplay is used,
// i.e., when there is an intent to start playback.
[_mediaHeartbeat trackSessionStart:mediaObject data:mediaContextData];
.......
.......
// 2. Call trackPlay when the playback actually starts, i.e., when the
// first frame of the main content is rendered on the screen.
[_mediaHeartbeat trackPlay];
.......
.......
// Chapter
NSMutableDictionary *chapterContextData = [[NSMutableDictionary alloc] init];
[chapterContextData setObject:CONTEXT_DATA_VALUE forKey:CONTEXT_DATA_KEY];
id chapterInfo =
[ADBMediaHeartbeat createChapterObjectWithName:CHAPTER_NAME
position:CHAPTER_POSITION
length:CHAPTER_LENGTH
startTime:CHAPTER_START_TIME];
// 3. Track the ADBMediaHeartbeatEventChapterStart event when the chapter
// starts to play.
[_mediaHeartbeat trackEvent:ADBMediaHeartbeatEventChapterStart
mediaObject:chapterInfo
data:chapterContextData];
.......
.......
// 4. Track the ADBMediaHeartbeatEventChapterComplete event when the chapter
// finishes playing.
[_mediaHeartbeat trackEvent:ADBMediaHeartbeatEventChapterComplete
mediaObject:nil
data:nil];
.......
.......
// 5. Call trackComplete when the playback reaches the end, i.e., when the
// media completes and finishes playing.
[_mediaHeartbeat trackComplete];
.......
.......
// 6. Call trackSessionEnd when the playback session is over. This method must
// be called even if the user does not watch the media to completion.
[_mediaHeartbeat trackSessionEnd];
.......
.......
JavaScript
若要在 JavaScript 中檢視此情境，請輸入下列文字：
// Set up mediaObject
var mediaInfo = MediaHeartbeat.createMediaObject(
Configuration.MEDIA_NAME,
Configuration.MEDIA_ID,
Configuration.MEDIA_LENGTH,
MediaHeartbeat.StreamType.VOD
);
var mediaMetadata = {
CUSTOM_KEY_1 : CUSTOM_VAL_1,
CUSTOM_KEY_2 : CUSTOM_VAL_2,
CUSTOM_KEY_3 : CUSTOM_VAL_3
};
// 1. Call trackSessionStart when Play is clicked or if autoplay is used,
// i.e., when there's an intent to start playback.
this._mediaHeartbeat.trackSessionStart(mediaInfo, mediaMetadata);
......
......
// Chapter
var chapterMetadata = {
CUSTOM_KEY_1 : CUSTOM_VAL_1
};
var chapterDataInfo =
MediaHeartbeat.createChapterObject(CHAPTER_NAME,
CHAPTER_POSITION,
CHAPTER_LENGTH,
CHAPTER_START_TIME);
// 2. Track the MediaHeartbeat.Event.ChapterStart event when the chapter
// starts to play.
this._mediaHeartbeat.trackEvent(MediaHeartbeat.Event.ChapterStart,
chapterDataInfo,
chapterMetadata);
.......
.......
// 3. Call trackPlay() when the playback actually starts, i.e., when the first
// frame of the main content is rendered on the screen.
this._mediaHeartbeat.trackPlay();
.......
.......
// 4. Track the MediaHeartbeat.Event.ChapterComplete event when the chapter
// finishes playing.
this._mediaHeartbeat.trackEvent(MediaHeartbeat.Event.ChapterComplete);
.......
.......
// 5. Call trackComplete() when the playback reaches the end, i.e., when playback
// completes and finishes playing.
this._mediaHeartbeat.trackComplete();
........
........
// 6. Call trackSessionEnd() when the playback session is over. This method must be
// called even if the user does not watch the media to completion.
this._mediaHeartbeat.trackSessionEnd();
........
........
程式碼範例、開頭的章節 sample-code-chapter-at-the-beginning
此情境中，VOD 內容會播放，而在播放的開頭具有一個章節。
Android
如要在 Android 中查看此情境，請設定下列程式碼：
// Set up mediaObject
MediaObject mediaInfo = MediaHeartbeat.createMediaObject(
Configuration.MEDIA_NAME,
Configuration.MEDIA_ID,
Configuration.MEDIA_LENGTH,
MediaHeartbeat.StreamType.VOD
);
HashMap<String, String> mediaMetadata = new HashMap<String, String>();
mediaMetadata.put(CUSTOM_KEY_1, CUSTOM_VAL_1);
mediaMetadata.put(CUSTOM_KEY_2, CUSTOM_VAL_2);
// 1. Call trackSessionStart() when the user clicks Play or if autoplay is used,
// i.e., there is an intent to start playback.
_mediaHeartbeat.trackSessionStart(mediaInfo, mediaMetadata);
......
......
// 2. Call trackPlay() when the playback actually starts, i.e., first frame of the
// main content is rendered on the screen.
_mediaHeartbeat.trackPlay();
.......
.......
// Chapter
HashMap<String, String> chapterMetadata = new HashMap<String, String>();
chapterMetadata.put(CUSTOM_KEY_1, CUSTOM_VAL_1);
MediaObject chapterDataInfo =
MediaHeartbeat.createChapterObject(CHAPTER_NAME,
CHAPTER_POSITION,
CHAPTER_LENGTH,
CHAPTER_START_TIME);
// 3. Track the MediaHeartbeat.Event.ChapterStart event when the chapter starts to play.
_mediaHeartbeat.trackEvent(MediaHeartbeat.Event.ChapterStart, chapterDataInfo, chapterMetadata);
.......
.......
// 4. Track the MediaHeartbeat.Event.ChapterComplete event when the chapter finishes playing.
_mediaHeartbeat.trackEvent(MediaHeartbeat.Event.ChapterComplete, null, null);
.......
.......
// 5. Call trackComplete() when the playback reaches the end, i.e., when the media completes
// and finishes playing.
_mediaHeartbeat.trackComplete();
........
........
// 6. Call trackSessionEnd() when the playback session is over. This method must be called even
// if the user does not watch the media to completion.
_mediaHeartbeat.trackSessionEnd();
........
........
iOS
如要在 iOS 中查看此情境，請設定下列程式碼：
when the user clicks Play
ADBMediaObject *mediaObject =
[ADBMediaHeartbeat createMediaObjectWithName:MEDIA_NAME
length:MEDIA_LENGTH
streamType:ADBMediaHeartbeatStreamTypeVOD];
NSMutableDictionary *mediaContextData = [[NSMutableDictionary alloc] init];
[mediaContextData setObject:CUSTOM_VAL_1 forKey:CUSTOM_KEY_1];
[mediaContextData setObject:CUSTOM_VAL_2 forKey:CUSTOM_KEY_2];
// 1. Call trackSessionStart when the user clicks Play or if autoplay is used,
// i.e., there is an intent to start playback.
[_mediaHeartbeat trackSessionStart:mediaObject data:mediaContextData];
.......
.......
// Chapter
NSMutableDictionary *chapterContextData = [[NSMutableDictionary alloc] init];
[chapterContextData setObject:CONTEXT_DATA_VALUE forKey:CONTEXT_DATA_KEY];
id chapterInfo =
[ADBMediaHeartbeat createChapterObjectWithName:CHAPTER_NAME
position:CHAPTER_POSITION
length:CHAPTER_LENGTH
startTime:CHAPTER_START_TIME];
// 2. Call ADBMediaHeartbeatEventChapterStart when the chapter starts.
[_mediaHeartbeat trackEvent:ADBMediaHeartbeatEventChapterStart
mediaObject:chapterInfo
data:chapterContextData];
.......
.......
// 3. Call trackPlay when the playback actually starts, i.e., when the
// first frame of the main content is rendered on the screen.
[_mediaHeartbeat trackPlay];
.......
.......
// 4. Call ADBMediaHeartbeatEventChapterComplete when the chapter starts.
[_mediaHeartbeat trackEvent:ADBMediaHeartbeatEventChapterComplete
mediaObject:nil
data:nil];
.......
.......
// 5. Call trackComplete when the playback reaches the end, i.e., when the
// media completes and finishes playing.
[_mediaHeartbeat trackComplete];
.......
.......
// 6. Call trackSessionEnd when the playback session is over. This method
// must be called even if the user does not watch the media to completion.
[_mediaHeartbeat trackSessionEnd];
.......
.......
JavaScript
若要在 JavaScript 中檢視此情境，請輸入下列文字：
// Set up mediaObject
var mediaInfo = MediaHeartbeat.createMediaObject(
Configuration.MEDIA_NAME,
Configuration.MEDIA_ID,
Configuration.MEDIA_LENGTH,
MediaHeartbeat.StreamType.VOD
);
var mediaMetadata = {
CUSTOM_KEY_1 : CUSTOM_VAL_1,
CUSTOM_KEY_2 : CUSTOM_VAL_2,
CUSTOM_KEY_3 : CUSTOM_VAL_3
};
// 1. Call trackSessionStart() when Play is clicked or if autoplay is used,
// i.e., when there's an intent to start playback.
this._mediaHeartbeat.trackSessionStart(mediaInfo, mediaMetadata);
......
......
// Chapter
var chapterMetadata = {
CUSTOM_KEY_1 : CUSTOM_VAL_1
};
var chapterDataInfo =
MediaHeartbeat.createChapterObject(CHAPTER_NAME,
CHAPTER_POSITION,
CHAPTER_LENGTH,
CHAPTER_START_TIME);
// 2. Track the MediaHeartbeat.Event.ChapterStart event when the chapter starts to play.
this._mediaHeartbeat.trackEvent(MediaHeartbeat.Event.ChapterStart,
chapterDataInfo,
chapterMetadata);
.......
.......
// 3. Call trackPlay() when the playback actually starts, i.e., when the first
// frame of the main content is rendered on the screen.
this._mediaHeartbeat.trackPlay();
.......
.......
// 4. Track the MediaHeartbeat.Event.ChapterComplete event when the chapter
// finishes playing.
this._mediaHeartbeat.trackEvent(MediaHeartbeat.Event.ChapterComplete);
.......
.......
// 5. Call trackComplete() when the playback reaches the end, i.e., when playback
// completes and finishes playing.
this._mediaHeartbeat.trackComplete();
........
........
// 6. Call trackSessionEnd() when the playback session is over. This method must be
// called even if the user does not watch the media to completion.
this._mediaHeartbeat.trackSessionEnd();
........
........
recommendation-more-help
c8eee520-cef5-4f8c-a38a-d4952cfae4eb