프리롤 광고가 있는 VOD 재생 vod-playback-with-pre-roll-ads
이 시나리오에서는 주 콘텐츠 앞에 프리롤 광고가 삽입되었습니다. 명시하지 않은 경우, 네트워크 호출은 광고 없이 VOD 재생 시나리오의 호출과 동일합니다. 네트워크 호출은 동시에 발생하지만 페이로드가 다릅니다.
trackSessionStart
trackEvent:AdBreakStart
trackEvent:AdStart
trackPlay
trackEvent:trackAdComplete
trackEvent:AdStart
trackEvent:trackAdComplete
trackEvent:AdBreakComplete
trackSessionEnd
SessionEnd
매개 변수 parameters
광고 재생이 시작되면 Heartbeat Ad Start
호출이 전송됩니다. 광고 시작이 10초 타이머와 일치하지 않으면 Heartbeat Ad Start
호출이 몇 초 지연되며, 호출이 다음 10초 간격으로 이동합니다. 이런 경우 Content Heartbeat
가 같은 간격에서 발생하며, 이벤트 유형과 자산 유형을 보고 두 호출을 구별할 수 있습니다.
하트비트 광고 시작
s:event:type
start
s:asset:type
ad
광고는 Content Heartbeats
와 동일한 기본 모델을 따르므로 Ad Play
호출은 Content Play
호출과 비슷합니다.
하트비트 광고 재생 호출
s:event:type
play
s:asset:type
ad
이러한 매개 변수는 Content Heartbeats
호출과 유사하지만, Ad Heartbeats
호출에는 몇 가지 추가 매개 변수가 포함됩니다.
광고 하트비트
s:event:type
play
s:asset:type
ad
s:asset:ad_id
s:asset:pod_id
광고 재생이 Heartbeat Content Complete
호출과 마찬가지로 완료되고 플레이헤드의 끝에 도달하면 Heartbeat Ad Complete
호출이 전송됩니다. 이 호출은 다른 Heartbeat Ad
호출과 비슷하게 보이지만 다음 두 가지 특정 항목을 포함합니다.
하트비트 광고 완료 호출
s:event:type
complete
s:asset:type
ad
프리롤 광고 브레이크용 샘플 코드 sample-code-for-a-pre-roll-ad-break
이 시나리오에서 VOD는 첫 번째 프리롤 광고, 두 번째 프리롤 광고로 구성된 다음 콘텐츠가 재생됩니다.
-
Android Android에서 이 시나리오를 보려면 다음 코드를 설정합니다.
code language-java // Set up mediaObject MediaObject mediaInfo = MediaHeartbeat.createMediaObject( Configuration.MEDIA_NAME, Configuration.MEDIA_ID, Configuration.MEDIA_LENGTH, MediaHeartbeat.StreamType.VOD ); HashMap<String, String> videoMetadata = new HashMap<String, String>(); videoMetadata.put(CUSTOM_KEY_1, CUSTOM_VAL_1); videoMetadata.put(CUSTOM_KEY_2, CUSTOM_VAL_2); // 1. Call trackSessionStart() when the user clicks Play or if autoplay is used, // i.e., there's an intent to start playback. _mediaHeartbeat.trackSessionStart(mediaInfo, videoMetadata); ...... ...... // Pre-roll MediaObject adBreakInfo = MediaHeartbeat.createAdBreakObject(ADBREAK_NAME, ADBREAK_POSITION, ADBREAK_START_TIME); MediaObject adInfo = MediaHeartbeat.createAdObject(AD_NAME, AD_ID, AD_POSITION, AD_LENGTH); // Context ad data HashMap<String, String> adMetadata = new HashMap<String, String>(); adMetadata.put(CUSTOM_KEY_1, CUSTOM_VAL_1); adMetadata.put(CUSTOM_KEY_2, CUSTOM_VAL_2); // 2. Track the MediaHeartbeat.Event.AdBreakStart event when the pre-roll pod starts // to play. Note that since this is a pre-roll, call must track the // "MediaHeartbeat.Event.AdBreakStart" event before you call trackPlay(). _mediaHeartbeat.trackEvent(MediaHeartbeat.Event.AdBreakStart, adBreakInfo, null); ....... ....... // 3. Track the MediaHeartbeat.Event.AdStart event when the pre-roll pod's ad starts // to play. Note that since this is a pre-roll, you must track the // "MediaHeartbeat.Event.AdStart" event before you call trackPlay(). _mediaHeartbeat.trackEvent(MediaHeartbeat.Event.AdStart, adInfo, adMetadata); ....... ....... // 4. Call trackPlay() when the playback actually starts, i.e., when the first frame // of the ad video is rendered on the screen. _mediaHeartbeat.trackPlay(); ....... ....... // 5. Track the MediaHeartbeat.Event.AdComplete event when the ad reaches the end, // i.e., when the ad completes and finishes playing. _mediaHeartbeat.trackEvent(MediaHeartbeat.Event.AdComplete, null, null); ....... ....... // 6. Track the MediaHeartbeat.Event.AdStart event when the pre-roll pod's second ad // starts to play. _mediaHeartbeat.trackEvent(MediaHeartbeat.Event.AdStart, adInfo, adMetadata); ....... ....... // 7. Track the MediaHeartbeat.Event.AdComplete event when the second ad reaches the // end, i.e., the second ad completes and finishes playing. _mediaHeartbeat.trackEvent(MediaHeartbeat.Event.AdComplete, null, null); ....... ....... // 8. Track the MediaHeartbeat.Event.AdBreakComplete event when all of the ads in the // pod finish playing. _mediaHeartbeat.trackEvent(MediaHeartbeat.Event.AdBreakComplete, null, null); ....... ....... // 9. Call trackComplete() when the playback reaches the end, i.e., when the video // completes and finishes playing. _mediaHeartbeat.trackComplete(); ........ ........ // 10. Call trackSessionEnd() when the playback session is over. This method must be // called even if the user does not watch the video to completion. _mediaHeartbeat.trackSessionEnd(); ........ ........
-
iOS - iOS에서 이 시나리오를 보려면 다음 코드를 설정합니다.
code language-none // Set up mediaObject ADBMediaObject *mediaObject = [ADBMediaHeartbeat createMediaObjectWithName:MEDIA_NAME length:MEDIA_LENGTH streamType:ADBMediaHeartbeatStreamTypeVOD]; NSMutableDictionary *videoContextData = [[NSMutableDictionary alloc] init]; [videoContextData setObject:CUSTOM_VAL_1 forKey:CUSTOM_KEY_1]; [videoContextData setObject:CUSTOM_VAL_2 forKey:CUSTOM_KEY_2]; // 1. Call trackSessionStart when the user clicks Play or if autoplay is used, // i.e., there is an intent to start playback. [_mediaHeartbeat trackSessionStart:mediaObject data:videoContextData]; ....... ....... // Pre-roll ADBMediaObject *adBreakInfo = [ADBMediaHeartbeat createAdBreakObjectWithName:AD_BREAK_NAME position:AD_BREAK_POSITION startTime:AD_BREAK_START_TIME]; ADBMediaObject *adInfo = [ADBMediaHeartbeat createAdObjectWithName:AD_NAME adId:AD_ID position:AD_POSITION length:AD_LENGTH]; // context ad data NSMutableDictionary *adDictionary = [[NSMutableDictionary alloc] init]; [adDictionary setObject:@"custom-val1" forKey:@"custom-key1"]; [adDictionary setObject:@"custom-val2" forKey:@"custom-key2"]; // 2. Track the ADBMediaHeartbeatEventAdBreakStart event when the pre-roll pod // starts to play. Note that since this is a pre-roll, you must track the // "ADBMediaHeartbeatEventAdBreakStart" event before you call trackPlay. [_mediaHeartbeat trackEvent:ADBMediaHeartbeatEventAdBreakStart mediaObject:adBreakObject data:nil]; ....... ....... // 3. Track the ADBMediaHeartbeatEventAdStart event when the pre-roll pod's // ad starts to play. Note that since this is a pre-roll, you must track // the "ADBMediaHeartbeatEventAdStart" event before you call trackPlay. [_mediaHeartbeat trackEvent:ADBMediaHeartbeatEventAdStart mediaObject:adObject data:adDictionary]; ....... ....... // 4. Call trackPlay when the playback actually starts, i.e., when the // first frame of the main content is rendered on the screen. [_mediaHeartbeat trackPlay]; ....... ....... // 5. Track the ADBMediaHeartbeatEventAdComplete event when the ad reaches // the end, i.e., when the video completes and finishes playing. [_mediaHeartbeat trackEvent:ADBMediaHeartbeatEventAdComplete mediaObject:nil data:nil]; ....... ....... // 6. Track the ADBMediaHeartbeatEventAdStart event when the pre-roll pod's // second ad starts to play. [_mediaHeartbeat trackEvent:ADBMediaHeartbeatEventAdStart mediaObject:adBreakObject data:nil]; ....... ....... // 7. Track the ADBMediaHeartbeatEventAdComplete event when the second ad // reaches the end, i.e., it completes and finishes playing. [_mediaHeartbeat trackEvent:ADBMediaHeartbeatEventAdComplete mediaObject:nil data:nil]; ....... ....... // 8. Track the ADBMediaHeartbeatEventAdBreakComplete event when all the // ads in the pod finish playing. [_mediaHeartbeat trackEvent:ADBMediaHeartbeatEventAdBreakComplete mediaObject:adBreakObject data:nil]; ....... ....... // 9. Call trackComplete when the playback reaches the end, i.e., when the // video completes and finishes playing. [_mediaHeartbeat trackComplete]; ....... ....... // 10. Call trackSessionEnd when the playback session is over. This method // must be called even if the user does not watch the video to completion. [_mediaHeartbeat trackSessionEnd]; ....... .......
-
JavaScript JavaScript에서 이 시나리오를 보려면 다음 텍스트를 입력합니다.
code language-js // Set up mediaObject var mediaInfo = MediaHeartbeat.createMediaObject(Configuration.MEDIA_NAME, Configuration.MEDIA_ID, Configuration.MEDIA_LENGTH,MediaHeartbeat.StreamType.VOD); var videoMetadata = { CUSTOM_KEY_1 : CUSTOM_VAL_1, CUSTOM_KEY_2 : CUSTOM_VAL_2, CUSTOM_KEY_3 : CUSTOM_VAL_3 }; // 1. Call trackSessionStart() when Play is clicked or if autoplay is used, // i.e., there's an intent to start playback. this._mediaHeartbeat.trackSessionStart(mediaInfo, videoMetadata); ...... ...... // Preroll var adBreakInfo = MediaHeartbeat.createAdBreakObject(ADBREAK_NAME, ADBREAK_POSITION, ADBREAK_START_TIME); var adInfo = MediaHeartbeat.createAdObject(AD_NAME, AD_ID, AD_POSITION, AD_LENGTH); // Custom ad metadata var adMetadata = { CUSTOM_AD_KEY_1 : CUSTOM_AD_VAL_1, CUSTOM_AD_KEY_2 : CUSTOM_AD_VAL_2 }; // 2. Track the MediaHeartbeat.Event.AdBreakStart event when the preroll pod starts to play. // Note that since this is a preroll, track the MediaHeartbeat.Event.AdBreakStart // event before you call trackPlay(). this._mediaheartbeat.trackEvent(MediaHeartbeat.Event.AdBreakStart, adBreakInfo, null); ....... ....... // 3. Track the MediaHeartbeat.Event.AdStart event when the preroll pod's ad starts to play. // Note that since this is a preroll, track the MediaHeartbeat.Event.AdStart event before // you call trackPlay(). this._mediaheartbeat.trackEvent(MediaHeartbeat.Event.AdStart, adInfo, adMetadata); ....... ....... // 4. Call trackPlay() when the playback actually starts, i.e., the first frame of the main content is rendered on the screen. this._mediaHeartbeat.trackPlay(); ....... ....... // 5. Track event MediaHeartbeat.Event.AdComplete when the ad reaches the end, // i.e., when it completes and finishes playing. this._mediaheartbeat.trackEvent(MediaHeartbeat.Event.AdComplete); ....... ....... // 6. Track the MediaHeartbeat.Event.AdStart event when the preroll pod's second // ad starts to play. this._mediaheartbeat.trackEvent(MediaHeartbeat.Event.AdStart, adInfo, adMetadata); ....... ....... // 7. Track the MediaHeartbeat.Event.AdComplete event when the second ad reaches // the end, i.e., when it completes and finishes playing. this._mediaheartbeat.trackEvent(MediaHeartbeat.Event.AdComplete); ....... ....... // 8. Track the MediaHeartbeat.Event.AdBreakComplete event when all the ads // in the pod finish playing. this._mediaheartbeat.trackEvent(MediaHeartbeat.Event.AdBreakComplete); ....... ....... // 9. Call trackComplete() when the playback reaches the end, i.e., when it // completes and finishes playing. this._mediaHeartbeat.trackComplete(); // 10. Call trackSessionEnd() when the playback session is over. This method must // be called even if the user does not watch the video to completion. this._mediaHeartbeat.trackSessionEnd(); ....... .......
여러 광고 브레이크용 샘플 코드 sample-code-for-multiple-ad-breaks
이 시나리오에서 VOD 콘텐츠는 프리롤 광고, 콘텐츠, 미드롤 광고, 콘텐츠 및 포스트롤 광고로 재생됩니다.
-
Android Android에서 이 시나리오를 보려면 다음 코드를 설정합니다.
code language-java // Set up mediaObject MediaObject mediaInfo = MediaHeartbeat.createMediaObject( Configuration.MEDIA_NAME, Configuration.MEDIA_ID, Configuration.MEDIA_LENGTH, MediaHeartbeat.StreamType.VOD ); HashMap<String, String> videoMetadata = new HashMap<String, String>(); videoMetadata.put(CUSTOM_KEY_1, CUSTOM_VAL_1); videoMetadata.put(CUSTOM_KEY_2, CUSTOM_VAL_2); // 1. Call trackSessionStart() when the user clicks Play or if autoplay is used, // i.e., there's an intent to start playback. _mediaHeartbeat.trackSessionStart(mediaInfo, videoMetadata); ...... ...... // Pre-roll MediaObject adBreakInfo = MediaHeartbeat.createAdBreakObject(ADBREAK_NAME, ADBREAK_POSITION, ADBREAK_START_TIME); MediaObject adInfo = MediaHeartbeat.createAdObject(AD_NAME, AD_ID, AD_POSITION, AD_LENGTH); // Context ad data HashMap<String, String> adMetadata = new HashMap<String, String>(); adMetadata.put(CUSTOM_KEY_1, CUSTOM_VAL_1); adMetadata.put(CUSTOM_KEY_2, CUSTOM_VAL_2); // 2. Track the MediaHeartbeat.Event.AdBreakStart event when the pre-roll pod // starts to play. Note that since this is a pre-roll, you must track the // "MediaHeartbeat.Event.AdBreakStart" event before you call trackPlay(). _mediaHeartbeat.trackEvent(MediaHeartbeat.Event.AdBreakStart, adBreakInfo, null); ....... ....... // 3. Track the MediaHeartbeat.Event.AdStart event when the pre-roll pod's ad // starts to play. Note that since this is a pre-roll, you must track the // "MediaHeartbeat.Event.AdStart" event before you call trackPlay(). _mediaHeartbeat.trackEvent(MediaHeartbeat.Event.AdStart, adInfo, adMetadata); ....... ....... // 4. Call trackPlay() when the playback actually starts, i.e., when the first // frame of the main content is rendered on the screen. _mediaHeartbeat.trackPlay(); ....... ....... // 5. Track the MediaHeartbeat.Event.AdComplete event when the ad reaches the end, // i.e., when the ad completes and finishes playing. _mediaHeartbeat.trackEvent(MediaHeartbeat.Event.AdComplete, null, null); ....... ....... // 6. Track the MediaHeartbeat.Event.AdBreakComplete event when all of the ads in //; the pod finish playing. _mediaHeartbeat.trackEvent(MediaHeartbeat.Event.AdBreakComplete, null, null); ....... ....... // Mid-roll MediaObject adBreakInfo = MediaHeartbeat.createAdBreakObject(mid-roll_BREAK_NAME, mid-roll_BREAK_POSITION, mid-roll_BREAK_START_TIME); MediaObject adInfo = MediaHeartbeat.createAdObject(mid-roll_AD_NAME, mid-roll_AD_ID, mid-roll_AD_POSITION, mid-roll_AD_LENGTH); // Context ad data HashMap<String, String> adMetadata = new HashMap<String, String>(); adMetadata.put(CUSTOM_KEY_1, CUSTOM_VAL_1); adMetadata.put(CUSTOM_KEY_2, CUSTOM_VAL_2); // 7. Track the MediaHeartbeat.Event.AdBreakStart event when the mid-roll pod // starts to play. _mediaHeartbeat.trackEvent(MediaHeartbeat.Event.AdBreakStart, adBreakInfo, null); ....... ....... // 8. Track the MediaHeartbeat.Event.AdStart event when the mid-roll pod's ad // starts to play. _mediaHeartbeat.trackEvent(MediaHeartbeat.Event.AdStart, adInfo, adMetadata); ....... ....... // 9. Track the MediaHeartbeat.Event.AdComplete event when the ad reaches the end, // i.e., when the adcompletes and finishes playing. _mediaHeartbeat.trackEvent(MediaHeartbeat.Event.AdComplete, null, null); ....... ....... // 10. Track the MediaHeartbeat.Event.AdBreakComplete event when all the ads in the // mid-roll pod finish playing. _mediaHeartbeat.trackEvent(MediaHeartbeat.Event.AdBreakComplete, null, null); ....... ....... // Post-roll MediaObject adBreakInfo = MediaHeartbeat.createAdBreakObject(POSTROLL_BREAK_NAME, POSTROLL_BREAK_POSITION, POSTROLL_BREAK_START_TIME); MediaObject adInfo = MediaHeartbeat.createAdObject(POSTROLL_AD_NAME, POSTROLL_AD_ID, POSTROLL_AD_POSITION, POSTROLL_AD_LENGTH); // Context ad data HashMap<String, String> adMetadata = new HashMap<String, String>(); adMetadata.put(CUSTOM_KEY_1, CUSTOM_VAL_1); adMetadata.put(CUSTOM_KEY_2, CUSTOM_VAL_2); // 11. Track the MediaHeartbeat.Event.AdBreakStart event when the post-roll pod // starts to play. _mediaHeartbeat.trackEvent(MediaHeartbeat.Event.AdBreakStart, adBreakInfo, null); ....... ....... // 12. Track the MediaHeartbeat.Event.AdStart event when the post-roll pod's // ad starts to play. _mediaHeartbeat.trackEvent(MediaHeartbeat.Event.AdStart, adInfo, adMetadata); ....... ....... // 13. Track the MediaHeartbeat.Event.AdComplete event when the ad reaches the // end, i.e., when the ad completes and finishes playing. _mediaHeartbeat.trackEvent(MediaHeartbeat.Event.AdComplete, null, null); ....... ....... // 14. Track the MediaHeartbeat.Event.AdBreakComplete event when all the ads in // the post-roll pod finish playing. _mediaHeartbeat.trackEvent(MediaHeartbeat.Event.AdBreakComplete, null, null); ....... ....... // 15. Call trackComplete() when the playback reaches the end, i.e., when the // video completes and finishes playing. _mediaHeartbeat.trackComplete(); ........ ........ // 16. Call trackSessionEnd() when the playback session is over. This method // must be called even if the user does not watch the video to completion. _mediaHeartbeat.trackSessionEnd(); ........ ........
-
iOS iOS에서 이 시나리오를 보려면 다음 코드를 설정합니다.
code language-none // Set up mediaObject ADBMediaObject *mediaObject = [ADBMediaHeartbeat createMediaObjectWithName:MEDIA_NAME length:MEDIA_LENGTH streamType:ADBMediaHeartbeatStreamTypeVOD]; NSMutableDictionary *videoContextData = [[NSMutableDictionary alloc] init]; [videoContextData setObject:CUSTOM_VAL_1 forKey:CUSTOM_KEY_1]; [videoContextData setObject:CUSTOM_VAL_2 forKey:CUSTOM_KEY_2]; // 1. Call trackSessionStart when the user clicks Play or if autoplay is used, // i.e., there is an intent to start playback. [_mediaHeartbeat trackSessionStart:mediaObject data:videoContextData]; ....... ....... // Pre-roll ADBMediaObject *adBreakInfo = [ADBMediaHeartbeat createAdBreakObjectWithName:AD_BREAK_NAME position:AD_BREAK_POSITION startTime:AD_BREAK_START_TIME]; ADBMediaObject *adInfo = [ADBMediaHeartbeat createAdObjectWithName:AD_NAME adId:AD_ID position:AD_POSITION length:AD_LENGTH]; // Context ad data NSMutableDictionary *adDictionary = [[NSMutableDictionary alloc] init]; [adDictionary setObject:@"custom-val1" forKey:@"custom-key1"]; [adDictionary setObject:@"custom-val2" forKey:@"custom-key2"]; // 2. Track the ADBMediaHeartbeatEventAdBreakStart event when the // pre-roll pod starts to play. Note that since this is a pre-roll, // you must track the ADBMediaHeartbeatEventAdBreakStart event // before you call trackPlay. [_mediaHeartbeat trackEvent:ADBMediaHeartbeatEventAdBreakStart mediaObject:adBreakObject data:adDictionary]; ....... ....... // 3. Track the ADBMediaHeartbeatEventAdStart when the pre-roll // pod's ad starts to play. Note that since this is a pre-roll, // you must track the ADBMediaHeartbeatEventAdStart before you // call trackPlay. [_mediaHeartbeat trackEvent:ADBMediaHeartbeatEventAdStart mediaObject:adObject data:adDictionary]; ....... ....... // 4. Call trackPlay when the playback actually starts, i.e., when // the first frame of the main content is rendered on the screen. [_mediaHeartbeat trackPlay]; ....... ....... // 5. Track the ADBMediaHeartbeatEventAdComplete event when the ad // reaches the end, i.e., when it completes and finishes playing. [_mediaHeartbeat trackEvent:ADBMediaHeartbeatEventAdComplete mediaObject:nil data:nil]; ....... ....... // 6. Track the ADBMediaHeartbeatEventAdBreakComplete event when all // of the ads in the pod finish playing. [_mediaHeartbeat trackEvent:ADBMediaHeartbeatEventAdBreakComplete mediaObject:nil data:nil]; ....... ....... // Mid-roll ADBMediaObject *adBreakInfo = [ADBMediaHeartbeat createAdBreakObjectWithName:MIDROLL_BREAK_NAME position:MIDROLL_BREAK_POSITION startTime:MIDROLL_BREAK_START_TIME]; ADBMediaObject *adInfo = [ADBMediaHeartbeat createAdObjectWithName:MIDROLL_AD_NAME adId:MIDROLL_AD_ID position:MIDROLL_AD_POSITION length:MIDROLL_AD_LENGTH]; // context ad data NSMutableDictionary *midrollAdDictionary = [[NSMutableDictionary alloc] init]; [midrollAdDictionary setObject:@"custom-val1" forKey:@"custom-key1"]; [midrollAdDictionary setObject:@"custom-val2" forKey:@"custom-key2"]; // 7. Track the ADBMediaHeartbeatEventAdBreakStart event when the mid-roll pod // starts to play. [_mediaHeartbeat trackEvent:ADBMediaHeartbeatEventAdBreakStart mediaObject:adBreakObject data:nil]; ....... ....... // 8. Track the ADBMediaHeartbeatEventAdStart event when the mid-roll pod's // ad starts to play. [_mediaHeartbeat trackEvent:ADBMediaHeartbeatEventAdStart mediaObject:adObject data:midrollAdDictionary]; ....... ....... // 9. Track the ADBMediaHeartbeatEventAdComplete event when the ad reaches // the end, i.e., when it completes and finishes playing. [_mediaHeartbeat trackEvent:ADBMediaHeartbeatEventAdComplete mediaObject:nil data:nil]; ....... ....... // 10. Track the ADBMediaHeartbeatEventAdBreakComplete event when all the // ads in the mid-roll pod finish playing. [_mediaHeartbeat trackEvent:ADBMediaHeartbeatEventAdBreakComplete mediaObject:nil data:nil]; ....... ....... // Post-roll ADBMediaObject *postrollBreakInfo = [ADBMediaHeartbeat createAdBreakObjectWithName:POSTROLL_BREAK_NAME position:POSTROLL_BREAK_POSITION startTime:POSTROLL_BREAK_START_TIME]; ADBMediaObject *adInfo = [ADBMediaHeartbeat createAdObjectWithName:POSTROLL_AD_NAME adId:POSTROLL_AD_ID position:POSTROLL_AD_POSITION length:POSTROLL_AD_LENGTH]; // Context ad data NSMutableDictionary *postrollAdDictionary = [[NSMutableDictionary alloc] init]; [postrollAdDictionary setObject:@"custom-val1" forKey:@"custom-key1"]; [postrollAdDictionary setObject:@"custom-val2" forKey:@"custom-key2"]; // 11. Track the ADBMediaHeartbeatEventAdBreakStart event when the // post-roll pod starts to play. [_mediaHeartbeat trackEvent:ADBMediaHeartbeatEventAdBreakStart mediaObject:adBreakObject data:nil]; ....... ....... // 12. Track the ADBMediaHeartbeatEventAdStart event when the // post-roll pod's ad starts to play. [_mediaHeartbeat trackEvent:ADBMediaHeartbeatEventAdStart mediaObject:adObject data:postrollAdDictionary]; ....... ....... // 13. Track the ADBMediaHeartbeatEventAdComplete event when the // post-roll pod's ad finishes playing. [_mediaHeartbeat trackEvent:ADBMediaHeartbeatEventAdComplete mediaObject:nil data:nil]; ....... ....... // 14. Track the ADBMediaHeartbeatEventAdBreakComplete event when // all the ads in the post-roll pod finish playing. [_mediaHeartbeat trackEvent:ADBMediaHeartbeatEventAdBreakComplete mediaObject:nil data:nil]; ....... ....... // 15. Call trackComplete when the playback reaches the end, // i.e., when the video completes and finishes playing. [_mediaHeartbeat trackComplete]; ....... ....... // 16. Call trackSessionEnd when the playback session is over. This method // must be called even if the user does not watch the video to completion. [_mediaHeartbeat trackSessionEnd]; ....... .......
-
JavaScript JavaScript에서 이 시나리오를 보려면 다음 텍스트를 입력합니다.
code language-js // Set up mediaObject MediaObject mediaInfo = MediaHeartbeat.createMediaObject( Configuration.MEDIA_NAME, Configuration.MEDIA_ID, Configuration.MEDIA_LENGTH, MediaHeartbeat.StreamType.VOD ); var videoMetadata = { CUSTOM_KEY_1 : CUSTOM_VAL_1, CUSTOM_KEY_2 : CUSTOM_VAL_2, CUSTOM_KEY_3 : CUSTOM_VAL_ }; // 1. Call trackSessionStart() when Play is clicked or if autoplay is used, // i.e., when there's an intent to start playback. this._mediaHeartbeat.trackSessionStart(mediaInfo, videoMetadata); ...... ...... // Preroll var adBreakInfo = MediaHeartbeat.createAdBreakObject(ADBREAK_NAME, ADBREAK_POSITION, ADBREAK_START_TIME); var adInfo = MediaHeartbeat.createAdObject(AD_NAME, AD_ID, AD_POSITION, AD_LENGTH); // Custom ad metadata var adMetadata = { CUSTOM_KEY_1 : CUSTOM_VAL_1, CUSTOM_KEY_2 : CUSTOM_VAL_2 }; // 2. Track the MediaHeartbeat.Event.AdBreakStart event when the preroll pod // starts to play. Note that since this is a preroll, you must track the // MediaHeartbeat.Event.AdBreakStart event before you call trackPlay(). this._trackEvent(MediaHeartbeat.Event.AdBreakStart, adBreakInfo, null); ....... ....... // 3. Track the MediaHeartbeat.Event.AdStart event when the preroll pod's ad // starts to play. Note that since this is a preroll, you must track the // MediaHeartbeat.Event.AdStart event before you call trackPlay(). this._heartbeat.trackEvent(MediaHeartbeat.Event.AdStart, adInfo, adMetadata); ....... ....... // 4. Call trackPlay() when the main content actually starts, i.e., when the // first frame of the video content is rendered on the screen. this._mediaHeartbeat.trackPlay(); ....... ....... // 5. Track the MediaHeartbeat.Event.AdComplete event when the ad reaches the end, // i.e., when the ad completes and finishes playing. this._heartbeat.trackEvent(MediaHeartbeat.Event.AdComplete, null, null); ....... ....... // 6. Track the MediaHeartbeat.Event.AdBreakComplete event when all of the ads in // the pod finish playing. this._mediaHeartbeat.trackEvent(MediaHeartbeat.Event.AdBreakComplete); ....... ....... // Midroll var adBreakInfo = MediaHeartbeat.createAdBreakObject(MIDROLL_BREAK_NAME, MIDROLL_BREAK_POSITION, MIDROLL_BREAK_START_TIME); var adInfo = MediaHeartbeat.createAdObject(MIDROLL_AD_NAME, MIDROLL_AD_ID, MIDROLL_AD_POSITION, MIDROLL_AD_LENGTH); // Custom ad metadata var adMetadata = { CUSTOM_KEY_1 : CUSTOM_VAL_1, CUSTOM_KEY_2 : CUSTOM_VAL_2 }; // 7. Track the MediaHeartbeat.Event.AdBreakStart event when the // midroll pod starts to play. this._mediaHeartbeat.trackEvent(MediaHeartbeat.Event.AdBreakStart, adBreakInfo); ....... ....... // 8. Track the MediaHeartbeat.Event.AdStart event when the midroll // pod's ad starts to play. this._mediaHeartbeat.trackEvent(MediaHeartbeat.Event.AdStart, adInfo, adMetadata); ....... ....... // 9. Track the MediaHeartbeat.Event.AdComplete event when the ad // reaches the end, i.e., when the ad completes and finishes playing. this._mediaHeartbeat.trackEvent(MediaHeartbeat.Event.AdComplete); ....... ....... // 10. Track the MediaHeartbeat.Event.AdBreakComplete event when all of // the ads in the midroll pod finish playing. this._mediaHeartbeat.trackEvent(MediaHeartbeat.Event.AdBreakComplete); ....... ....... // Set up mediaObject var mediaInfo = MediaHeartbeat.createMediaObject( Configuration.MEDIA_NAME, Configuration.MEDIA_ID, Configuration.MEDIA_LENGTH, MediaHeartbeat.StreamType.VOD ); var videoMetadata = { CUSTOM_KEY_1 : CUSTOM_VAL_1, CUSTOM_KEY_2 : CUSTOM_VAL_2, CUSTOM_KEY_3 : CUSTOM_VAL_3 }; // 1. Call trackSessionStart() when Play is clicked or if autoplay // is used, i.e., when there's an intent to start playback. this._mediaHeartbeat.trackSessionStart(mediaInfo, videoMetadata); ...... ...... // Preroll var adBreakInfo = MediaHeartbeat.createAdBreakObject(ADBREAK_NAME, ADBREAK_POSITION, ADBREAK_START_TIME); var adInfo = MediaHeartbeat.createAdObject(AD_NAME, AD_ID, AD_POSITION, AD_LENGTH); // Custom ad metadata var adMetadata = { CUSTOM_KEY_1 : CUSTOM_VAL_1, CUSTOM_KEY_2 : CUSTOM_VAL_2 }; // 2. Track the MediaHeartbeat.Event.AdBreakStart event when the preroll pod // starts to play. Note that since this is a preroll, you must track the // MediaHeartbeat.Event.AdBreakStart event before you call trackPlay(). this._mediaHeartbeat.trackEvent(MediaHeartbeat.Event.AdBreakStart, adBreakInfo); ....... ....... // 3. Track the MediaHeartbeat.Event.AdStart event when the preroll pod's // ad starts to play. Note that since this is a preroll, you must track // the MediaHeartbeat.Event.AdStart event before you call trackPlay(). this._mediaHeartbeat.trackEvent(MediaHeartbeat.Event.AdStart, adInfo, adMetadata); ....... ....... // 4. Call trackPlay() when the playback actually starts, i.e., when the first // frame of the main content is rendered on the screen. _mediaHeartbeat.trackPlay(); ....... ....... // 5. Track the MediaHeartbeat.Event.AdComplete event when the ad reaches // the end, i.e., when the ad completes and finishes playing. this._mediaHeartbeat.trackEvent(MediaHeartbeat.Event.AdComplete); ....... ....... // 6. Track the MediaHeartbeat.Event.AdBreakComplete event when all // of the ads in the pod finish playing. this._mediaHeartbeat.trackEvent(MediaHeartbeat.Event.AdBreakComplete); ....... ....... // Mid-roll var adBreakInfo = MediaHeartbeat.createAdBreakObject(MIDROLL_BREAK_NAME, MIDROLL_BREAK_POSITION, MIDROLL_BREAK_START_TIME); var adInfo = MediaHeartbeat.createAdObject(MIDROLL_AD_NAME, MIDROLL_AD_ID, MIDROLL_AD_POSITION, MIDROLL_AD_LENGTH); // Custom ad metadata var adMetadata = { CUSTOM_KEY_1 : CUSTOM_VAL_1, CUSTOM_KEY_2 : CUSTOM_VAL_2 }; // 7. Track the MediaHeartbeat.Event.AdBreakStart event when the midroll // pod starts to play. this._mediaHeartbeat.trackEvent(MediaHeartbeat.Event.AdBreakStart, adBreakInfo); ....... ....... // 8. Track the MediaHeartbeat.Event.AdStart event when the midroll pod's // ad starts to play. this._mediaHeartbeat.trackEvent(MediaHeartbeat.Event.AdStart, adInfo, adMetadata); ....... ....... // 9. Track the MediaHeartbeat.Event.AdComplete event when the ad reaches // the end, i.e., when the ad completes and finishes playing. this._mediaHeartbeat.trackEvent(MediaHeartbeat.Event.AdComplete); ....... ....... // 10. Track the MediaHeartbeat.Event.AdBreakComplete event when all // of the ads in the midroll pod finish playing. this._mediaHeartbeat.trackEvent(MediaHeartbeat.Event.AdBreakComplete); ....... ....... // Postroll var adBreakInfo = MediaHeartbeat.createAdBreakObject(POSTROLL_BREAK_NAME, POSTROLL_BREAK_POSITION, POSTROLL_BREAK_START_TIME); var adInfo = MediaHeartbeat.createAdObject(POSTROLL_AD_NAME, POSTROLL_AD_ID, POSTROLL_AD_POSITION, POSTROLL_AD_LENGTH); // Custom ad metadata var adMetadata = { CUSTOM_KEY_1 : CUSTOM_VAL_1, CUSTOM_KEY_2 : CUSTOM_VAL_2 }; // 11. Track the MediaHeartbeat.Event.AdBreakStart event when the postroll // pod starts to play. this._mediaHeartbeat.trackEvent(MediaHeartbeat.Event.AdBreakStart, adBreakInfo); ....... ....... // 12. Track the MediaHeartbeat.Event.AdStart event when the postroll pod's ad // starts to play. this._mediaHeartbeat.trackEvent(MediaHeartbeat.Event.AdStart, adInfo, adMetadata); ....... ....... // 13. Track the MediaHeartbeat.Event.AdComplete event when the ad reaches // the end, i.e., when the ad completes and finishes playing. this._mediaHeartbeat.trackEvent(MediaHeartbeat.Event.AdComplete); ....... ....... // 14. Track the MediaHeartbeat.Event.AdBreakComplete event when all of // the ads in the postroll pod finish playing. this._mediaHeartbeat.trackEvent(MediaHeartbeat.Event.AdBreakComplete); ....... ....... // 15. Call trackComplete() when the playback reaches the end, i.e., when playback // completes and finishes playing. this._mediaHeartbeat.trackComplete(); ........ ........ // 16. Call trackSessionEnd() when the playback session is over. This method must be called // even if the user does not watch the video to completion. this._mediaHeartbeat.trackSessionEnd(); ........ ........