DocumentationAEM 6.5User Guide

Page Templates - Editable page-templates-editable

Last update: Thu Aug 15 2024 00:00:00 GMT+0000 (Coordinated Universal Time)

CREATED FOR:

  • Developer

Editable templates have been introduced to:

  • Allow specialized authors to create and edit templates.

    • Such specialized authors are called template authors
    • Template authors must be members of the template-authors group.

  • Provide templates that retain a dynamic connection to any pages created from them. Doing so ensures that any changes to the template are reflected in the pages themselves.

  • Make the page component more generic so the core page component can be used without customization.

With editable templates, the pieces that make a page are isolated within components. You can configure the necessary combinations of components in a UI so that you eliminate the need for a new page component to be developed for each page variation.

NOTE
Static templates are also available.

This document:

  • Gives an overview of creating editable templates

  • Describes the admin/developer tasks required to create editable templates

  • Describes the technical underpinnings of editable templates

This document assumes that you are already familiar with creating and editing templates. See the authoring document Creating Page Templates, which details the capabilities of editable templates as exposed to the template author.

NOTE
Following tutorial might also be of interest for setting up an editable page template in a new project:
Getting Started with AEM Sites Part 2 - Creating a Base Page and Template

Creating a New Template creating-a-new-template

Creating editable templates is primarily done with the template console and template editor by a template author. This section gives an overview of this process and follows with a description of what occurs at a technical level.

For information on how to use editable templates in an AEM project see Creating an AEM project using Lazybones.

When creating an editable template you:

  1. Create a folder for the templates. This folder is not mandatory, but is recommended best practice.

  2. Select a template type. This type is copied to create the template definition.

    note note
    NOTE
    A selection of template types are provided out-of-the-box. You can also create your own site-specific template types, if necessary.

  3. Configure the structure, content policies, initial content, and layout of the new template.

    Structure

    • The structure lets you define components and content for your template.

    • Components defined in the template structure cannot be moved on a resulting page nor deleted from any resulting pages.

      • If you are creating a template in a custom folder outside of the We.Retail sample content, you can choose Foundation Components or use Core Components.

    • If you want page authors to be able to add and remove components, add a paragraph system to the template.

    • Components can be unlocked and locked again to let you define initial content.

    For details on how a template author defines the structure, see Creating Page Templates.

    For technical details of the structure, see Structure in this document.

    Policies

    • The content policies define the design properties of a component.

      • For example, the components available or minimum/maximum dimensions.

    • These policies are applicable to the template (and pages created with the template).

    For details on how a template author defines policies, see Creating Page Templates.

    For technical detail of policies, see Content Policies in this document.

    Initial Content

    • Initial Content defines content that appears when a page is first created based on the template.
    • Initial content can then be edited by page authors.

    For details on how a template author defines the structure, see Creating Page Templates.

    For technical details on initial content, see Initial Content in this document.

    Layout

    • You can define the template layout for a range of devices.
    • Responsive layout for templates operates as it does for page authoring.

    For details on how a template author defines the template layout, see Creating Page Templates.

    For technical details on template layout, see Layout in this document.

  4. Enable the template, then allow it for specific content trees.

    • A template can be enabled or disabled to make it available or unavailable to page authors.
    • A template can be made available or unavailable for certain page branches.

    For details on how a template author enables a template, see Creating Page Templates.

    For technical details on enabling a template, see Enabling and Allowing a Template for Use in this document

  5. Use it to create content pages.

    • When using a template to create a page, there is no visible difference and no indication between static and editable templates.
    • For the page author, the process is transparent.

    For details on how a page author uses templates to create a page, see Creating and Organizing Pages.

    For technical details on creating pages with editable templates, see Resultant Content Pages in this document.

TIP
Never enter any information that must be internationalized into a template. For internalization purposes, the localization feature of the Core Components is recommended.
NOTE
Templates are powerful tools to streamline your page creation workflow. However too many templates can overwhelm the authors and make page creation confusing. A good rule of thumb is to keep the number of templates under 100.
Adobe does not recommend having more than 1000 templates due to potential performance impacts.
NOTE
The editor client library assumes the presence of the cq.shared namespace in content pages. If it is absent, it results in the JavaScript error Uncaught TypeError: Cannot read property 'shared' of undefined.
All sample content pages contain cq.shared, so any content based on them automatically includes cq.shared. However, if you decide to create your own content pages from scratch without basing them on sample content, you must make sure to include the cq.shared namespace.
See Using Client-Side Libraries for further information.

Template Folders template-folders

For organizing your templates, you can use the following folders:

  • global
  • Site-specific
    The site-specific folders that you create to organize your templates are created with an account holding admin privileges.
NOTE
Even though you can nest your folders, when the user views them in the Templates console they are presented as a flat structure.

In a standard AEM instance, the global folder exists in the template console. This folder holds default templates and acts as a fallback if no policies and/or template-types are found in the current folder. You can add your default templates to this folder or create a folder (recommended).

NOTE
It is best practice to create a folder to hold your customized templates and not to use the global folder.
CAUTION
Folders must be created by a user with admin rights.

Template types and policies are inherited across all folders according to the following order of precedence:

  1. The current folder.
  2. Parent or parents of the current folder.
  3. /conf/global
  4. /apps
  5. /libs

A list of all allowed entries is created. If any configurations overlap ( path/ label), only the instance closest to the current folder is presented to the user.

To create a folder, do the following:

  • Programmatically or with CRXDE Lite
  • Using the Configuration Browser

Using CRXDE Lite using-crxde-lite

  1. A new folder (under /conf) can be created for your instance either programmatically or with CRXDE Lite.

    The following structure must be used:

    code language-xml 
    /conf
    <your-folder-name> [sling:Folder]
        settings [sling:Folder]
            wcm [cq:Page]
                templates [cq:Page]
                policies [cq:Page]

  2. You can then define the following properties on the folder root node:

    <your-folder-name> [sling:Folder]

    Name: jcr:title

    • Type: String

    • Value: The title (for the folder) you want to appear in the Templates console.

  3. In addition to the standard authoring permissions and privileges (for example, content-authors), assign groups and define the required access rights (ACLs) for your authors to be able to create templates in the new folder.

    The template-authors group is the default group that must be assigned. See the following section ACLs and Groups for details.

    See Access Right Management for full details on managing and assigning access rights.

Using the Configuration Browser using-the-configuration-browser

  1. Go to Global Navigation > Tools > Configuration Browser.

    The existing folders are listed to the left including the global folder.

  2. Click Create.

  3. In the Create Configuration dialog, the following fields must be configured:

    • Title: Provide a title for the configuration folder
    • Editable Templates: Select to allow for editable templates within this folder

  4. Click Create

NOTE
In the Configuration Browser, you can edit the global folder and activate the Editable Templates option if you want to create templates within this folder. However, this practice is not a recommended best practice.
See the Configuration Browser documentation for more information.

ACLs and Groups acls-and-groups

After your template folders are created (either by way of CRXDE or with the Configuration Browser), ACLs must be defined for the appropriate groups for the template folders to ensure proper security.

The template folders for the We.Retail reference implementation can be used as an example.

The template-authors Group the-template-authors-group

The template-authors group is the group used to manage access to templates and comes standard with AEM, but is empty. Users must be added to the group for the project/site.

CAUTION
The template-authors group is only for users that must be able to create templates.
Editing templates is powerful and if not done properly, existing templates can break. Therefore, this role should be focused and only include qualified users.

The following table details the necessary permissions for template editing.

Path
Role / Group
Permissions
Description
/conf/<your-folder>/settings/wcm/templates
Template Authors
read, write, replicate
Template authors that create, read, update, delete, and replicate templates in site-specific /conf space
Anonymous Web User
read
Anonymous Web User must read templates while rendering a page
Content Authors
replicate
replicateContent authors must activate the templates of a page when activating a page
/conf/<your-folder>/settings/wcm/policies
Template Author
read, write, replicate
Template authors that create, read, update, delete, and replicate templates in site-specific /conf space
Anonymous Web User
read
Anonymous Web User must read policies while rendering a page
Content Authors
replicate
Content authors must activate the policies of a template of a page when activating a page
/conf/<site>/settings/template-types
Template Author
read
Template author creates a template based on one of the predefined template types.
Anonymous Web User
none
Anonymous Web User must not access the template types

This default template-authors group only covers the project setups, where all template-authors members are allowed to access and author all templates. For more complex setups, where there is a need for multiple template authors groups to separate access to templates, more custom template authors groups must be created. However, the permissions for the template authors groups would still be the same.

Legacy Templates under /conf/global legacy-templates-under-conf-global

Do not store templates in /conf/global. However, for some legacy installations, there may still be templates in this location. Only in such legacy situations should the following /conf/global paths be explicitly configured.

Path
Role / Group
Permissions
Description
/conf/global/settings/wcm/templates
Template Authors
read, write, replicate
Template authors that create, read, update, delete, and replicate templates in /conf/global
Anonymous Web User
read
Anonymous Web User must read templates while rendering a page
Content Authors
replicate
Content authors must activate the templates of a page when activating a page
/conf/global/settings/wcm/policies
Template Author
read, write, replicate
Template authors that create, read, update, delete, and replicate templates in /conf/global
Anonymous Web User
read
Anonymous Web User must read policies while rendering a page
Content Authors
replicate
Content authors must activate the policies of a template of a page when activating a page
/conf/global/settings/wcm/template-types
Template Author
read
Template author creates a template based on one of the predefined template types
Anonymous Web User
none
Anonymous Web User must not access the template types

Template Type template-type

When creating a template, specify a template type:

  • Template types effectively provide templates for a template. When creating a template, the structure and initial content of the selected template type is used to create the template.

    • The template type is copied to create the template.
    • Once the copy has occurred, the only connection between the template and the template type is a static reference for information purposes.

  • Template types let you define:

    • The resource type of the page component.
    • The policy of the root node, which defines the components allowed in the template editor.
    • Adobe recommends that you define the breakpoints for the responsive grid and setup of the mobile emulator at on the template type. This step is optional, because the configuration could also be defined on the individual template (see Template Type and Mobile Device Groups).

  • AEM provides a small selection of out-of-the-box template types such as HTML5 Page and Adaptive Form Page.

    • Additional examples are provided as a part of the We.Retail sample content.

  • Template types are typically defined by developers.

The out-of-the box template types are stored under:

  • /libs/settings/wcm/template-types
CAUTION
Do not change anything in the /libs path. The reason is because the content of /libs is overwritten the next time you upgrade your instance (and may be overwritten when you apply either a hotfix or feature pack).

Your site-specific template types should be stored in the comparable location of:

  • /apps/settings/wcm/template-types

Definitions for your customized templates types should be stored in user-defined folders (recommended) or alternatively in global. For example:

  • /conf/<my-folder-01>/<my-folder-02>/settings/wcm/template-types
  • /conf/<my-folder>/settings/wcm/template-types
  • /conf/global/settings/wcm/template-types
CAUTION
The template types have to respect the correct folder structure (that is, /settings/wcm/...), otherwise the template types are not found.

Template Type and Mobile Device Groups template-type-and-mobile-device-groups-br

The device groups used for an editable template (set as relative path of the property cq:deviceGroups) define which mobile devices are available as emulators in the layout mode of page authoring. This value can be set in two places:

  • On the editable template type
  • On the editable template

When creating an editable template, the value is copied from the template type to the individual template. If the value is not set on the type, it can be set on the template. Once a template is created, there is no inheritance from the type to the template.

CAUTION
The value of cq:deviceGroups must be set as a relative path such as mobile/groups/responsive and not as an absolute path such as /etc/mobile/groups/responsive.
NOTE
With static templates, the value of cq:deviceGroups could be set at the root of the site.
With editable templates, this value is now stored at the template level and is not supported at the page root level.

Creating Template Types creating-template-types

If you have created a template that can serve as the basis of other templates, you can copy this template as a template type.

  1. Create a template as you would any editable template. See Creating Page Templates. This can serve as the basis of your template type.
  2. Using CRXDE Lite, copy the newly created template from the templates node to the template-types node under the template folder.
  3. Delete the template from the templates node under the template folder.
  4. In the copy of the template that is under the template-types node, delete all cq:template and cq:templateType properties from all jcr:content nodes.

You can also develop your own template type using an example editable template as a basis, available on GitHub.

CODE ON GITHUB

You can find the code of this page on GitHub

Template Definitions template-definitions

Definitions for editable templates are stored user-defined folders (recommended) or alternatively in global. For example:

  • /conf/<my-folder>/settings/wcm/templates
  • /conf/<my-folder-01>/<my-folder-02>/settings/wcm/templates
  • /conf/global/settings/wcm/templates

The root node of the template is of type cq:Template with a skeleton structure of:

<template-name>
  initial
    jcr:content
      root
        <component>
        ...
        <component>
  jcr:content
    @property status
  policies
    jcr:content
      root
        @property cq:policy
        <component>
          @property cq:policy
        ...
        <component>
          @property cq:policy
  structure
    jcr:content
      root
        <component>
        ...
        <component>
      cq:responsive
        breakpoints
  thumbnail.png

The main elements are:

  • <template-name>

    • [initial](#initial-content)
    • jcr:content
    • [structure](#structure)
    • [policies](#policies)
    • thumbnail.png

jcr:content jcr-content

This node holds properties for the template:

  • Name: jcr:title

  • Name: status

    • Type: String

    • Value: draft, enabled, or disabled

Structure structure

Defines the structure of the resultant page:

  • Is merged with the initial content ( /initial) when creating a page.

  • Changes made to the structure are reflected in any pages created with the template.

  • The root ( structure/jcr:content/root) node defines the list of components that are available in the resulting page.

    • Components defined in the template structure cannot be moved on or deleted from any resultant pages.

    • After a component is unlocked, the editable property is set to true.

    • After a component that already contains content is unlocked, this content is moved to the initial branch.

  • The cq:responsive node holds definitions for the responsive layout.

Initial Content initial-content

Defines the initial content that a new page has on creation:

  • Contains a jcr:content node that is copied to any new pages.
  • Is merged with the structure ( /structure) when creating a page.
  • Any existing pages are updated if the initial content is changed after creation.
  • The root node holds a list of components to define what are available in the resulting page.
  • If content is added to a component in structure mode and that component is later unlocked (or conversely), then this content is used as initial content.

Layout layout

When editing a template, you can define the layout, this practice uses standard responsive layout that can also be configured.

Content Policies content-policies

The content (or design) policies define the design properties of a component, such as the component’s availability or minimum/maximum dimensions. These policies are applicable to the template (and pages created with the template). Content policies can be created and selected in the template editor.

  • The property cq:policy, on the root node
    /conf/<your-folder>/settings/wcm/templates/<your-template>/policies/jcr:content/root
    Provides a relative reference to the content policy for the page’s paragraph system.

  • The property cq:policy, on the component-explicit nodes under root, provide links to the policies for the individual components.

  • The actual policy definitions are stored under:
    /conf/<your-folder>/settings/wcm/policies/wcm/foundation/components

NOTE
The paths of policy definitions depend on the path of the component. The cq:policy holds a relative reference to the configuration itself.
NOTE
Pages created from editable templates do not offer a Design mode in the page editor.
The policies tree of an editable template has the same hierarchy as the design mode configuration of a static template under:
/etc/designs/<my-site>/jcr:content/<component-name>
The design mode configuration of a static template was defined per page component.

Page Policies page-policies

Page policies let you define the content policy for the page (main parsys), in either the template or resultant pages.

Enabling and Allowing a Template for Use enabling-and-allowing-a-template-for-use

  1. Enable the Template

    Before a template can be used, it must be enabled by either:

    • Enabling the template from the Templates console.

    • Setting the status property on the jcr:content node.

      • For example, on:
        /conf/<your-folder>/settings/wcm/templates/<your-template>/jcr:content

      • Define the property:

        • Name: status
        • Type: String
        • Value: enabled

  2. Allowed Templates

    For example, with a value of:

    /conf/<your-folder>/settings/wcm/templates/.*

Resultant Content Pages resultant-content-pages

Pages created from editable templates:

  • Are created with a subtree that is merged from structure and initial in the template

  • Have references to information held in the template and template type. You can achieve this functionality with a jcr:content node with the properties:

    • cq:template
      Provides the dynamic reference to the actual template; enables changes to the template to be reflected on the actual pages.

    • cq:templateType
      Provides a reference to the template type.

chlimage_1-71

The above diagram shows how templates, content, and components interrelate:

  • Controller - /content/<my-site>/<my-page>
    The resultant page that references the template. The content controls the entire process. According to the definitions, it accesses the appropriate template and components.

  • Configuration - /conf/<my-folder>/settings/wcm/templates/<my-template>
    The template and related content policies define the page configuration.

  • Model - OSGi bundles
    The OSGI bundles implement the functionality.

  • View - /apps/<my-site>/components
    On both the author and publish environments, the content is rendered by components.

When rendering a page:

  • Templates:

    • The cq:template property of its jcr:content node is referenced to access the template that corresponds to that page.

  • Components:

    • The page component merges the structure/jcr:content tree of the template with the jcr:content tree of the page.

    • The page component only allows the author to edit the nodes of the template structure that have been flagged as editable (and any children).

    • When rendering a component on a page, the relative path of that component is taken from the jcr:content node; the same path under the policies/jcr:content node of the template is then searched.

      • The cq:policy property of this node points to the actual content policy (that is, it holds the design configuration for that component).

      • This functionality lets you have multiple templates that reuse the same content policy configurations.

recommendation-more-help
19ffd973-7af2-44d0-84b5-d547b0dffee2