DocumentationAEM 6.4Deploying Guide

Configuring OSGi configuring-osgi

Last update: Wed May 03 2023 00:00:00 GMT+0000 (Coordinated Universal Time)

CREATED FOR:

  • Developer
CAUTION
AEM 6.4 has reached the end of extended support and this documentation is no longer updated. For further details, see our technical support periods. Find the supported versions here.

OSGi is a fundamental element in the technology stack of Adobe Experience Manager (AEM). It is used to control the composite bundles of AEM and their configuration.

OSGi “provides the standardized primitives that allow applications to be constructed from small, reusable and collaborative components. These components can be composed into an application and deployed”.

This allows easy management of bundles as they can be stopped, installed, started individually. The interdependencies are handled automatically. Each OSGi Component (see the OSGi Specification) is contained in one of the various bundles.

You can manage the configuration settings for such bundles by either:

Either method can be used though there are subtle differences, primarily in relation to Run Modes:

  • Adobe CQ Web console

    • The Web Console is the standard interface for OSGi configuration. It provides a UI for editing the various properties, where possible values can be selected from predefined lists.

      As such it is the easiest method to use.

    • Any configurations made with the Web Console are applied immediately and applicable to the current instance, irrespective of the current run mode, or any subsequent changes to the run mode.

  • configuration files

    • Contain settings defined in the web console.
    • Can be included in content packages for use on other instances.

  • content-nodes (sling:osgiConfig) in the repository

    • This requires manual configuration using CRXDE Lite.
    • Due to the naming conventions of the sling:OsgiConfig nodes, you can tie the configuration to a specific run mode. You can even save configurations for more than one run mode in the same repository.
    • Any appropriate configurations are applied immediately (dependent on the run mode).

Whichever method you use, all of these configuration methods:

  • Ensure that copying or replicating the repository contents recreates identical configurations.
  • Allow you to check configurations out to FileVault or Subversion; either for security or further updates.
  • Can be saved in packages for use when setting up other instances.
  • Allow you to perform configuration rollouts using scripts to propogate the configuration details.
NOTE
Details of certain important settings are listed under OSGi Configuration Settings.

OSGi Configuration with the Web Console osgi-configuration-with-the-web-console

The Web console in AEM provides a standardized interface for configuring the bundles. The Configuration tab is used for configuring the OSGi bundles, and is therefore the underlying mechanism for configuring AEM system parameters.

Any changes made are immediately applied to the relevant OSGi configuration, no restart is required.

NOTE
Changes made in the web console are saved in the repository as configuration files. These can be included in content packages for re-use in further installations.
NOTE
On the Web console any descriptions that mention default settings relate to Sling defaults.
Adobe Experience Manager has its own defaults and so the defaults set might differ from those documented on the console.

To update a configuration with the web console:

  1. Access the Configuration tab of the Web Console by either:

    • Opening the web console from the link on the Tool -> Operations menu. After logging into the console you can use the drop-down menu of:

      OSGi >

    • The direct URL; for example:

      http://localhost:4502/system/console/configMgr

    A list will be shown.

  2. Select the bundle that you want to configure by either:

    • clicking on the Edit icon for that bundle
    • clicking on the Name of the bundle

  3. A dialog will open. Here you can edit as required; for example, set the Log Level to INFO:

    chlimage_1-140

    note note
    NOTE
    Updates are saved in the repository as configuration files. To locate these afterwards, (e.g. to include in a content package for use on another instance) you should make a note of the persistent identity ( PID).

  4. Click Save.

    Your changes are immediately applied to the relevant OSGi configuration of the running system, no restart is required.

    note note
    NOTE
    You can now locate the related configuration file(s); for example, to include in a content package for use on another instance.

OSGi Configuration with configuration files osgi-configuration-with-configuration-files

Configuration changes made using the Web Console are persisted in the repository as configuration files ( .config) under:

/apps

These can be included in content packages and re-used on other instances.

NOTE
The format of the configuration files are very specific - see the Sling Apache documentation for full details.
For this reason it is recommended to create and maintain the configuration file by making actual changes in the web console.

The Web Console shows no indication of where in the repository your changes have been saved, but they can be easily located:

  1. Create the configuration file by making an initial change in the web console.

  2. Open CRXDE Lite.

  3. In the Tools menu select Query … .

  4. Submit a query of Type SQL to search for the PID of the configuration that you have updated.

    For example, Apache Felix OSGi Management Console has the persistent identity (PID) of:

    org.apache.felix.webconsole.internal.servlet.OsgiManager

    So the SQL query could be:

    code language-shell 
    select * from nt:base where jcr:path like '/apps/%' and contains(*, 'org.apache.felix.webconsole.internal.servlet.OsgiManager')

  5. The configuration file node will be shown.

    For the above example:

    /apps/system/config/org.apache.felix.webconsole.internal.servlet.OsgiManager.config

    note caution
    CAUTION
    You can open this file to view your changes, but to avoid typing errors it is recommended to make actual changes with the console.

  6. You can now build a content package, containing this node, and use as required on your other instances.

OSGi Configuration in the Repository osgi-configuration-in-the-repository

In addition to using the web console, you can also define configuration details in the repository. This allows you to easily configure your differing run modes.

These configurations are made by creating sling:OsgiConfig nodes in the repository for the system to reference. These nodes mirror the OSGi configurations, and form a user interface to them. To update the configuration data you update the node properties.

If you modify the configuration data in the repository the changes are immediately applied to the relevant OSGi configuration as if the changes had been made using the Web console, with the appropriate validation and consistency checks. This also applies to the action of copying a configuration from /libs/ to /apps/.

As the same configuration parameter can be located in several places, the system:

  • searches for all nodes of type sling:OsgiConfig
  • filters according to service name
  • filters according to run mode
NOTE
Read also how to define a repository based confinguration for a specific instance only.

Adding a New Configuration to the Repository adding-a-new-configuration-to-the-repository

What You Need to Know what-you-need-to-know

To add a new configuration to the repository you need to know the following:

  1. The Persistent Identity (PID) of the service.

    Reference the Configurations field in the Web console. The name is shown in brackets after the bundle name (or in the Configuration Information towards the bottom of the page).

    For example, create a node com.day.cq.wcm.core.impl.VersionManagerImpl. to configure AEM WCM Version Manager.

    chlimage_1-141

  2. Whether a specific run mode is required. Create the folder:

    • config - for all run modes
    • config.author - for the author environment
    • config.publish - for the publish environment
    • config.<run-mode> - as appropriate

  3. Whether a Configuration or Factory Configuration is necessary.

  4. The individual parameters to be configured; including any existing parameter definitions that will need to be recreated.

    Reference the individual parameter field in the Web console. The name is shown in brackets for each parameter.

    For example, create a property
    versionmanager.createVersionOnActivation to configure Create Version on Activation.

    chlimage_1-142

  5. Does a configuration already exist in /libs? To list all configurations in your instance, use the Query tool in CRXDE Lite to submit the following SQL query:

    select * from sling:OsgiConfig

    If so, this configuration can be copied to /apps/<yourProject>/, then customized in the new location.

Creating the Configuration in the Repository creating-the-configuration-in-the-repository

To actually add the new configuration to the repository:

  1. Use CRXDE Lite to navigate to:

    /apps/<yourProject>

  2. If not already existing, create the config folder ( sling:Folder):

    • config - applicable to all run modes
    • config.<run-mode> - specific to a particular run mode

  3. Under this folder create a node:

    • Type: sling:OsgiConfig

    • Name: the persistent identity (PID);

      for example for AEM WCM Version Manager use com.day.cq.wcm.core.impl.VersionManagerImpl

    note note
    NOTE
    When making a Factory Configuration append -<identifier> to the name.
    As in: org.apache.sling.commons.log.LogManager.factory.config-<identifier>
    Where <identifier> is replaced by free text that you (must) enter to identify the instance (you cannot omit this information); for example:
    org.apache.sling.commons.log.LogManager.factory.config-MINE

  4. For each parameter that you want to configure, create a property on this node:

    • Name: the parameter name as shown in the Web console; the name is shown in brackets at the end of the field description. For example, for Create Version on Activation use versionmanager.createVersionOnActivation
    • Type: as appropriate.
    • Value: as required.

    You only need to create properties for the parameters that you want to configure, others will still take the default values as set by AEM.

  5. Save all changes.

    Changes are applied as soon as the node is updated by restarting the service (as with changes made in the Web console).

CAUTION
You must not change anything in the /libs path.
CAUTION
The full path of a configuration must be correct for it to be read at startup.

Configuration Details configuration-details

Resolution Order at Startup resolution-order-at-startup

The following order of precedence is used:

  1. Repository nodes under /apps/*/config....either with type sling:OsgiConfig or property files.

  2. Repository nodes with type sling:OsgiConfig under /libs/*/config.... (out-of-the-box definitions).

  3. Any .config files from <*cq-installation-dir*>/crx-quickstart/launchpad/config/.... on the local file system.

This means that a generic configuration in /libs can be masked by a project specific configuration in /apps.

Resolution Order at Runtime resolution-order-at-runtime

Configuration changes made while the system is running trigger a reload with the modified configuration.

Then the following order of precedence applies:

  1. Modifying a configuration in the Web console will take immediate effect as it takes precedence at runtime.
  2. Modifying a configuration in /apps will take immediate effect.
  3. Modifying a configuration in /libs will take immediate effect, unless it is masked by a configuration in /apps.

Resolution of multiple Run Modes resolution-of-multiple-run-modes

For run mode specific configurations, multiple run modes can be combined. For example, you can create configuration folders in the following style:

/apps/*/config.<runmode1>.<runmode2>/

Configurations in such folders will be applied if all run modes match a run mode defined at startup.

For example, if an instance was started with the run modes author,dev,emea, configuration nodes in /apps/*/config.emea, /apps/*/config.author.dev/ and /apps/*/config.author.emea.dev/ will be applied, while configuration nodes in /apps/*/config.author.asean/ and /config/author.dev.emea.noldap/ will not be applied.

If multiple configurations for the same PID are applicable, the configuration with the highest number of matching run modes is applied.

For example, if an instance was started with the run modes author,dev,emea, and both /apps/*/config.author/ and /apps/*/config.emea.author/ define a configuration for
com.day.cq.wcm.core.impl.VersionManagerImpl, the configuration in /apps/*/config.emea.author/ will be applied.

This rule’s granularity is at a PID level.
You cannot define some properties for the same PID in /apps/*/config.author/ and more specific ones in /apps/*/config.emea.author/ for the same PID.
The configuration with the highest number of matching run modes will be effective for the entier PID.

Standard Configurations standard-configurations

The following list shows a small selection of the configurations available (in a standard installation) in the repository:

  • Author - AEM WCM Filter:

    libs/wcm/core/config.author/com.day.cq.wcm.core.WCMRequestFilter

  • Publish - AEM WCM Filter:

    libs/wcm/core/config.publish/com.day.cq.wcm.core.WCMRequestFilter

  • Publish - AEM WCM Page Statistics:

    libs/wcm/core/config.publish/com.day.cq.wcm.core.stats.PageViewStatistics

NOTE
As these configurations reside in /libs they must not be edited directly, but copied to your application area ( /apps) before customization.

To list all configuration nodes in your instance, use the Query functionality in CRXDE Lite to submit the following SQL query:

select * from sling:OsgiConfig

Configuration Persistence configuration-persistence

  • If you change a configuration through the Web console, it is (usually) written into the repository at:

    /apps/{somewhere}

    • By default {somewhere} is system/config so the configuration is written to

      /apps/system/config

    • However, if you are editing a configuration which initially came from elsewhere in the repository: for example:

      /libs/foo/config/someconfig

      Then the updated configuration is written under the original location; for example:

      /apps/foo/config/someconfig

  • Settings that are changed by admin are saved in *.config files under:

    code language-none 
       /crx-quickstart/launchpad/config

    • This is the private data area of the OSGi configuration admin and holds all configuration details specified by admin, regardless how they entered the system.

    • This is an implementation detail and you must never edit this directory directly.

    • However, it is useful to know the location of these configuration files so that copies can be taken for backup and/or multiple installation:

      • Apache Felix OSGi Management Console

        ../crx/org/apache/felix/webconsole/internal/servlet/OsgiManager.config

      • CRX Sling Client Repository

        ../com/day/crx/sling/client/impl/CRXSlingClientRepository/<pid-nr>.config

CAUTION
You must never edit the folders or files under:
/crx-quickstart/launchpad/config
recommendation-more-help
6a71a83d-c2e0-4ce7-a6aa-899aa3885b56