Schnellstarts zur Forms Service-API

Die folgenden Schnellstarts sind für den Forms-Dienst verfügbar:

Schnellstart (SOAP-Modus): Rendern eines interaktiven PDF-Formulars mit der Java-API

Schnellstart (SOAP-Modus): Wiedergabe eines Formulars auf dem Client mithilfe der Java-API

Schnellstart (SOAP-Modus): Wiedergabe eines Formulars basierend auf Fragmenten mithilfe der Java-API

Schnellstart (SOAP-Modus): Rendern eines Formulars mit aktivierten Rechten mithilfe der Java-API

Schnellstart (SOAP-Modus): HTML-Formular mit der Java-API wiedergeben

Schnellstart (SOAP-Modus): Rendern eines HTML-Formulars mit einer benutzerdefinierten Symbolleiste mithilfe der Java-API

Schnellstart (SOAP-Modus): Umgang mit als XML gesendeten PDF forms mithilfe der Java-API

Schnellstart (SOAP-Modus): Umgang mit als PDF gesendeten PDF forms mit der Java-API

Schnellstart (SOAP-Modus): Umgang mit HTML-Formularen, die als XML mit der Java-API gesendet wurden

Schnellstart (SOAP-Modus): Erstellen von PDF-Dokumenten mit gesendeten XML-Daten mithilfe der Java-API

Schnellstart (SOAP-Modus): Vorausfüllen von Forms mit flexiblen Layouts mithilfe der Java-API

Schnellstart (SOAP-Modus): Verarbeiten eines Formulars mit einem Berechnungsskript mithilfe der Java-API

Schnellstart (SOAP-Modus): Leistungsoptimierung mit der Java-API

Schnellstart (SOAP-Modus): Rendern nach Wert mit der Java-API

Schnellstart (SOAP-Modus): Übergeben von Dokumenten an den Forms-Dienst mithilfe der Java-API

Anwendungslogik, die die Forms-Dienst-API verwendet, wird als Java-Servlets implementiert. AEM Forms-Vorgänge können mit der stark typisierten AEM Forms-API ausgeführt werden und der Verbindungsmodus sollte auf SOAP festgelegt werden.

HINWEIS

Schnellstarts, die unter Programmieren mit v zu finden sind, basieren darauf, dass Sie einen anderen Formularserver verwenden, z. B. Unix, ersetzen Windows-spezifische Pfade durch Pfade, die vom jeweiligen Betriebssystem unterstützt werden. Wenn Sie einen anderen J2EE-Anwendungsserver verwenden, stellen Sie sicher, dass Sie gültige Verbindungseigenschaften angeben. Siehe Einstellung von Verbindungseigenschaften.

Schnellstart (SOAP-Modus): Rendern eines interaktiven PDF-Formulars mit der Java-API

Im folgenden Codebeispiel wird ein interaktives PDF-Formular mit dem Namen Loan.xdp in einen Client-Webbrowser gerendert. Eine Datei wird an das Formular angehängt. Beachten Sie, dass der Formularentwurf Teil einer Anwendung ist und durch Verwendung des Inhaltsstamm-URI-Werts repository:/// referenziert wird. (Siehe Rendern interaktiver PDF forms.)

 /* 
     * This Java Quick Start uses the following JAR files 
     * 1. adobe-forms-client.jar 
     * 2. adobe-livecycle-client.jar 
     * 3. adobe-usermanager-client.jar 
    * 4. activation.jar (required for SOAP mode) 
    * 5. axis.jar (required for SOAP mode) 
    * 6. commons-codec-1.3.jar (required for SOAP mode) 
    * 7. commons-collections-3.2.jar  (required for SOAP mode) 
    * 8. commons-discovery.jar (required for SOAP mode) 
    * 9. commons-logging.jar (required for SOAP mode) 
    * 10. dom3-xml-apis-2.5.0.jar (required for SOAP mode) 
    * 11. jaxen-1.1-beta-9.jar (required for SOAP mode) 
    * 12. jaxrpc.jar (required for SOAP mode) 
    * 13. log4j.jar (required for SOAP mode) 
    * 14. mail.jar (required for SOAP mode) 
    * 15. saaj.jar (required for SOAP mode) 
    * 16. wsdl4j.jar (required for SOAP mode) 
    * 17. xalan.jar (required for SOAP mode) 
    * 18. xbean.jar (required for SOAP mode) 
    * 19. xercesImpl.jar (required for SOAP mode) 
     * 
     * (Because Forms quick starts are implemented as Java servlets, it is  
     * not necessary to include J2EE specific JAR files - the Java project 
     * that contains this quick start is exported as a WAR file which 
     * is deployed to the J2EE application server) 
     * 
     * These JAR files are located in the following path: 
     * <install directory>/sdk/client-libs/common 
     * 
     * For complete details about the location of these JAR files,  
     * see "Including AEM Forms library files" in Programming with AEM forms. 
     */ 
 import java.io.FileInputStream; 
 import java.io.IOException; 
 import javax.servlet.Servlet; 
 import javax.servlet.ServletException; 
 import javax.servlet.ServletOutputStream; 
  
 import javax.servlet.http.HttpServlet; 
 import javax.servlet.http.HttpServletRequest; 
 import javax.servlet.http.HttpServletResponse; 
 import com.adobe.livecycle.formsservice.client.*; 
 import java.util.*; 
 import java.io.InputStream; 
  
 import com.adobe.idp.Document; 
 import com.adobe.idp.dsc.clientsdk.ServiceClientFactory; 
 import com.adobe.idp.dsc.clientsdk.ServiceClientFactoryProperties; 
  
 public class RenderPDFForm extends HttpServlet implements Servlet { 
  
     public void doGet(HttpServletRequest req, HttpServletResponse resp) 
         throws ServletException, IOException { 
             doPost(req,resp); 
     } 
      
     public void doPost(HttpServletRequest req, HttpServletResponse resp) 
         throws ServletException, IOException { 
         try{ 
             //Set connection properties required to invoke AEM Forms                                 
             Properties connectionProps = new Properties(); 
             connectionProps.setProperty(ServiceClientFactoryProperties.DSC_DEFAULT_SOAP_ENDPOINT, "https://[server]:[port]"); 
             connectionProps.setProperty(ServiceClientFactoryProperties.DSC_TRANSPORT_PROTOCOL,ServiceClientFactoryProperties.DSC_SOAP_PROTOCOL);           
             connectionProps.setProperty(ServiceClientFactoryProperties.DSC_SERVER_TYPE, "JBoss"); 
             connectionProps.setProperty(ServiceClientFactoryProperties.DSC_CREDENTIAL_USERNAME, "administrator"); 
             connectionProps.setProperty(ServiceClientFactoryProperties.DSC_CREDENTIAL_PASSWORD, "password"); 
              
             //Create a ServiceClientFactory object 
             ServiceClientFactory myFactory = ServiceClientFactory.createInstance(connectionProps); 
                  
             //Create a FormsServiceClient object 
             FormsServiceClient formsClient = new FormsServiceClient(myFactory);  
          
             //Set the parameter values for the renderPDFForm method 
             String formName = "Applications/FormsApplication/1.0/FormsFolder/Loan.xdp";   
                      
             byte[]    cData = "".getBytes(); 
             Document oInputData = new Document(cData); 
                                      
             //Set run-time options using a PDFFormRenderSpec instance 
             PDFFormRenderSpec pdfFormRenderSpec = new PDFFormRenderSpec(); 
             pdfFormRenderSpec.setCacheEnabled(new Boolean(true)); 
             pdfFormRenderSpec.setAcrobatVersion(AcrobatVersion.Acrobat_9); 
                      
             //Specify URI values that are required to render a form 
             URLSpec uriValues = new URLSpec();  
             uriValues.setApplicationWebRoot("https://[server]:[port]/FormsQS"); 
             uriValues.setContentRootURI("repository:///"); 
             uriValues.setTargetURL("https://[server]:[port]/FormsQS/HandleData"); 
                      
             //Specify file attachments to attach to the form 
             FileInputStream fileAttachment = new FileInputStream("C:\\rideau1.jpg");  
             Document attachment1 = new Document(fileAttachment); 
             String fileName = "rideau1.jpg"; 
             Map fileAttachments = new HashMap(); 
             fileAttachments.put(fileName, attachment1);  
                          
             //Invoke the renderPDFForm method and write the  
             //results to a client web browser 
             FormsResult formOut = formsClient.renderPDFForm( 
                         formName,               //formQuery 
                         oInputData,             //inDataDoc 
                         pdfFormRenderSpec,      //PDFFormRenderSpec 
                         uriValues,                //urlSpec 
                         fileAttachments            //attachments 
                         ); 
          
             //Create a Document object that stores form data 
             Document myData = formOut.getOutputContent(); 
          
             //Get the content type of the response and 
             //set the HttpServletResponse objects content type 
             String contentType = myData.getContentType();  
             resp.setContentType(contentType); 
          
             //Create a ServletOutputStream object 
             ServletOutputStream oOutput = resp.getOutputStream(); 
          
             //Create an InputStream object 
             InputStream inputStream = myData.getInputStream(); 
          
             //Write the data stream to the web browser 
             byte[] data = new byte[4096]; 
             int bytesRead = 0; 
             while ((bytesRead = inputStream.read(data)) > 0) 
             { 
                 oOutput.write(data, 0, bytesRead); 
             } 
          
             }catch (Exception e) { 
                  e.printStackTrace(); 
               } 
         } 
 }

Schnellstart (SOAP-Modus): Wiedergabe eines Formulars auf dem Client mithilfe der Java-API

Im folgenden Codebeispiel wird ein Formular mit dem Namen *Loan.xdp *auf dem Client mithilfe der Java-API des Forms-Diensts gerendert. Beachten Sie, dass der Formularentwurf Teil einer Anwendung ist und durch Verwendung des Inhaltsstamm-URI-Werts repository:/// referenziert wird. (Siehe Rendern von Forms am Client.)

 /* 
     * This Java Quick Start uses the following JAR files 
     * 1. adobe-forms-client.jar 
     * 2. adobe-livecycle-client.jar 
     * 3. adobe-usermanager-client.jar 
    * 4. activation.jar (required for SOAP mode) 
    * 5. axis.jar (required for SOAP mode) 
    * 6. commons-codec-1.3.jar (required for SOAP mode) 
    * 7. commons-collections-3.2.jar  (required for SOAP mode) 
    * 8. commons-discovery.jar (required for SOAP mode) 
    * 9. commons-logging.jar (required for SOAP mode) 
    * 10. dom3-xml-apis-2.5.0.jar (required for SOAP mode) 
    * 11. jaxen-1.1-beta-9.jar (required for SOAP mode) 
    * 12. jaxrpc.jar (required for SOAP mode) 
    * 13. log4j.jar (required for SOAP mode) 
    * 14. mail.jar (required for SOAP mode) 
    * 15. saaj.jar (required for SOAP mode) 
    * 16. wsdl4j.jar (required for SOAP mode) 
    * 17. xalan.jar (required for SOAP mode) 
    * 18. xbean.jar (required for SOAP mode) 
    * 19. xercesImpl.jar (required for SOAP mode) 
    * 
     * (Because Forms quick starts are implemented as Java servlets, it is  
     * not necessary to include J2EE specific JAR files - the Java project 
     * that contains this quick start is exported as a WAR file which 
     * is deployed to the J2EE application server) 
     * 
     * These JAR files are located in the following path: 
     * <install directory>/sdk/client-libs/common 
     * 
     * For complete details about the location of these JAR files,  
     * see "Including AEM Forms library files" in Programming with AEM forms. 
     */ 
 import java.io.IOException; 
 import javax.servlet.Servlet; 
 import javax.servlet.ServletException; 
 import javax.servlet.ServletOutputStream; 
 import javax.servlet.http.HttpServlet; 
 import javax.servlet.http.HttpServletRequest; 
 import javax.servlet.http.HttpServletResponse; 
 import com.adobe.livecycle.formsservice.client.*; 
 import java.util.*; 
 import java.io.InputStream; 
 import com.adobe.idp.Document; 
 import com.adobe.idp.dsc.clientsdk.ServiceClientFactory; 
 import com.adobe.idp.dsc.clientsdk.ServiceClientFactoryProperties; 
  
 public class RenderPDFFormClient extends HttpServlet implements Servlet { 
      
     public void doGet(HttpServletRequest req, HttpServletResponse resp) 
         throws ServletException, IOException { 
              
             doPost(req,resp); 
     } 
      
     public void doPost(HttpServletRequest req, HttpServletResponse resp) 
         throws ServletException, IOException { 
              
     try{ 
         //Set connection properties required to invoke AEM Forms                                 
         Properties connectionProps = new Properties(); 
         connectionProps.setProperty(ServiceClientFactoryProperties.DSC_DEFAULT_SOAP_ENDPOINT, "https://[server]:[port]"); 
         connectionProps.setProperty(ServiceClientFactoryProperties.DSC_TRANSPORT_PROTOCOL,ServiceClientFactoryProperties.DSC_SOAP_PROTOCOL);           
         connectionProps.setProperty(ServiceClientFactoryProperties.DSC_SERVER_TYPE, "JBoss"); 
         connectionProps.setProperty(ServiceClientFactoryProperties.DSC_CREDENTIAL_USERNAME, "administrator"); 
         connectionProps.setProperty(ServiceClientFactoryProperties.DSC_CREDENTIAL_PASSWORD, "password"); 
              
         //Create a ServiceClientFactory object 
         ServiceClientFactory myFactory = ServiceClientFactory.createInstance(connectionProps); 
                  
         //Create a FormsServiceClient object 
         FormsServiceClient formsClient = new FormsServiceClient(myFactory);  
          
         //Set parameter values required by the renderPDFForm method 
         String formName = "Applications/FormsApplication/1.0/FormsFolder/Loan.xdp";  
         byte[]    cData = "".getBytes(); 
         Document oInputData = new Document(cData); 
                  
         //Set a run-time option required to render a form on the client 
         PDFFormRenderSpec pdfRenderSpec = new PDFFormRenderSpec();  
         pdfRenderSpec.setRenderAtClient(RenderAtClient.Yes); 
                  
         //Specify URI values required to render a form 
         URLSpec uriValues = new URLSpec();  
         uriValues.setApplicationWebRoot("https://[server]:[port]/FormsServiceClientApp"); 
         uriValues.setContentRootURI("repository:///"); 
         uriValues.setTargetURL("https://[server]:[port]/FormsServiceClientApp/HandleData"); 
          
         //Invoke the renderPDFForm method to render  
         //an interactive PDF form on the client 
         FormsResult formOut = formsClient.renderPDFForm( 
                 formName,            
                 oInputData,          
                 pdfRenderSpec,       
                 uriValues,             
                 null                 
             ); 
          
         //Create a Document object that stores form data 
         Document myData = formOut.getOutputContent(); 
          
         //Get the content type of the response and 
         //set the HttpServletResponse objects content type 
         String contentType = myData.getContentType();  
         resp.setContentType(contentType); 
          
         //Create a ServletOutputStream object 
         ServletOutputStream oOutput = resp.getOutputStream(); 
          
         //Create an InputStream object 
         InputStream inputStream = myData.getInputStream(); 
          
         //Write the data stream to the web browser 
         byte[] data = new byte[4096]; 
         int bytesRead = 0; 
         while ((bytesRead = inputStream.read(data)) > 0) 
         { 
             oOutput.write(data, 0, bytesRead); 
         } 
          
         }catch (Exception e) { 
              System.out.println("The following exception occurred: "+e.getMessage()); 
          } 
     } 
 } 
 

Schnellstart (SOAP-Modus): Rendern eines Guides (veraltet) mit der Java-API

Im folgenden Codebeispiel wird ein Guide (nicht mehr unterstützt) mit dem Namen TLALifeClaim.xdp in einen Client-Webbrowser gerendert.

 /* 
     * This Java Quick Start uses the following JAR files 
     * 1. adobe-forms-client.jar 
     * 2. adobe-livecycle-client.jar 
     * 3. adobe-usermanager-client.jar 
    * 4. activation.jar (required for SOAP mode) 
    * 5. axis.jar (required for SOAP mode) 
    * 6. commons-codec-1.3.jar (required for SOAP mode) 
    * 7. commons-collections-3.2.jar  (required for SOAP mode) 
    * 8. commons-discovery.jar (required for SOAP mode) 
    * 9. commons-logging.jar (required for SOAP mode) 
    * 10. dom3-xml-apis-2.5.0.jar (required for SOAP mode) 
    * 11. jaxen-1.1-beta-9.jar (required for SOAP mode) 
    * 12. jaxrpc.jar (required for SOAP mode) 
    * 13. log4j.jar (required for SOAP mode) 
    * 14. mail.jar (required for SOAP mode) 
    * 15. saaj.jar (required for SOAP mode) 
    * 16. wsdl4j.jar (required for SOAP mode) 
    * 17. xalan.jar (required for SOAP mode) 
    * 18. xbean.jar (required for SOAP mode) 
    * 19. xercesImpl.jar (required for SOAP mode) 
    * 
     * (Because Forms quick starts are implemented as Java servlets, it is  
     * not necessary to include J2EE specific JAR files - the Java project 
     * that contains this quick start is exported as a WAR file which 
     * is deployed to the J2EE application server) 
     * 
     * These JAR files are located in the following path: 
     * <install directory>/sdk/client-libs/common 
     * 
     * For complete details about the location of these JAR files,  
     * see "Including AEM Forms library files" in Programming with AEM forms 
     */ 
 import java.io.IOException; 
 import java.io.InputStream; 
 import javax.servlet.Servlet; 
 import javax.servlet.ServletException; 
 import javax.servlet.ServletOutputStream; 
 import javax.servlet.http.HttpServlet; 
 import javax.servlet.http.HttpServletRequest; 
 import javax.servlet.http.HttpServletResponse; 
 import com.adobe.livecycle.formsservice.client.*; 
 import java.util.*; 
  
 import com.adobe.idp.Document; 
 import com.adobe.idp.dsc.clientsdk.ServiceClientFactory; 
 import com.adobe.idp.dsc.clientsdk.ServiceClientFactoryProperties; 
  
 public class RenderFormGuide extends HttpServlet implements Servlet { 
  
      
     public void doGet(HttpServletRequest req, HttpServletResponse resp) 
         throws ServletException, IOException { 
             doPost(req,resp);  
     } 
      
     public void doPost(HttpServletRequest req, HttpServletResponse resp) 
         throws ServletException, IOException { 
     try{ 
              
         //Set connection properties required to invoke AEM Forms                                 
         Properties connectionProps = new Properties(); 
         connectionProps.setProperty(ServiceClientFactoryProperties.DSC_DEFAULT_SOAP_ENDPOINT, "https://[server]:[port]"); 
         connectionProps.setProperty(ServiceClientFactoryProperties.DSC_TRANSPORT_PROTOCOL,ServiceClientFactoryProperties.DSC_SOAP_PROTOCOL);           
         connectionProps.setProperty(ServiceClientFactoryProperties.DSC_SERVER_TYPE, "JBoss"); 
         connectionProps.setProperty(ServiceClientFactoryProperties.DSC_CREDENTIAL_USERNAME, "administrator"); 
         connectionProps.setProperty(ServiceClientFactoryProperties.DSC_CREDENTIAL_PASSWORD, "password"); 
              
         //Create a ServiceClientFactory object 
         ServiceClientFactory myFactory = ServiceClientFactory.createInstance(connectionProps); 
         FormsServiceClient formsClient = new FormsServiceClient(myFactory);  
          
         //Specify the parameters for the renderActivityGuide method 
         String formName = "Applications/FormsApplication/1.0/FormsFolder/TLALifeClaim.xdp";  
         byte[] cData = "".getBytes(); 
         Document oInputData = new Document(cData); 
                  
         //Cache the PDF form 
         PDFFormRenderSpec pdfFormRenderSpec = new PDFFormRenderSpec(); 
         pdfFormRenderSpec.setCacheEnabled(new Boolean(true)); 
  
         //Set Form Guide run-time options 
         ActivityGuideRenderSpec renderSpec = new ActivityGuideRenderSpec();  
         renderSpec.setGuidePDF(false); 
          
         //Specify URI values that are required to render a form 
         //design located in the AEM Forms repository 
         URLSpec uriValues = new URLSpec();  
         uriValues.setApplicationWebRoot("https://[server]:[port]/FormsQS"); 
         uriValues.setContentRootURI("repository:///"); 
         uriValues.setTargetURL("https://[server]:[port]/FormsQS/HandleData"); 
          
  
         //Invoke the renderFormGuide method 
         FormsResult formOut = formsClient.renderFormGuide( 
                 formName,            //formQuery 
                 oInputData,          //inDataDoc  
                 pdfFormRenderSpec,    //pdfFormRenderSpec 
                 renderSpec,           //activityGuideRenderSpec 
                 uriValues              //urlSpec 
                 );   
          
         //Create a Document object that stores form data 
         Document myData = formOut.getOutputContent(); 
          
         //Get the content type of the response 
         String contentType = myData.getContentType();  
         resp.setContentType(contentType); 
          
         //Create a ServletOutputStream object 
         ServletOutputStream oOutput = resp.getOutputStream(); 
          
         //Create an InputStream object 
         InputStream inputStream = myData.getInputStream(); 
          
         //Write the data stream to the web browser 
         byte[] data = new byte[4096]; 
         int bytesRead = 0; 
         while ((bytesRead = inputStream.read(data)) > 0) 
         { 
             oOutput.write(data, 0, bytesRead); 
         } 
  
     }catch (Exception e) { 
              System.out.println("The following exception occured: "+e.getMessage()); 
               } 
      } 
 } 
 

Schnellstart (SOAP-Modus): Wiedergabe eines Formulars basierend auf Fragmenten mithilfe der Java-API

Im folgenden Codebeispiel wird ein Formular wiedergegeben, das auf Fragmenten basiert. Der Name des Formularentwurfs ist PurchaseOrderDynamic.xdp und er befindet sich im AEM Forms-Repository (die XDP-Datei wird in einem Ordner namens FormsFolder im Repository gespeichert). Auch die Fragmente, auf die das POFragment-Formular verweist, müssen sich im Repository befinden. (Siehe Rendern von Forms basierend auf Fragmenten.)

 /* 
     * This Java Quick Start uses the following JAR files 
     * 1. adobe-forms-client.jar 
     * 2. adobe-livecycle-client.jar 
     * 3. adobe-usermanager-client.jar 
    * 4. activation.jar (required for SOAP mode) 
    * 5. axis.jar (required for SOAP mode) 
    * 6. commons-codec-1.3.jar (required for SOAP mode) 
    * 7. commons-collections-3.2.jar  (required for SOAP mode) 
    * 8. commons-discovery.jar (required for SOAP mode) 
    * 9. commons-logging.jar (required for SOAP mode) 
    * 10. dom3-xml-apis-2.5.0.jar (required for SOAP mode) 
    * 11. jaxen-1.1-beta-9.jar (required for SOAP mode) 
    * 12. jaxrpc.jar (required for SOAP mode) 
    * 13. log4j.jar (required for SOAP mode) 
    * 14. mail.jar (required for SOAP mode) 
    * 15. saaj.jar (required for SOAP mode) 
    * 16. wsdl4j.jar (required for SOAP mode) 
    * 17. xalan.jar (required for SOAP mode) 
    * 18. xbean.jar (required for SOAP mode) 
    * 19. xercesImpl.jar (required for SOAP mode) 
     * 
     * (Because Forms quick starts are implemented as Java servlets, it is  
     * not necessary to include J2EE specific JAR files - the Java project 
     * that contains this quick start is exported as a WAR file which 
     * is deployed to the J2EE application server) 
     * 
     * These JAR files are located in the following path: 
     * <install directory>/sdk/client-libs/common 
     * 
     * For complete details about the location of these JAR files,  
     * see "Including AEM Forms library files" in Programming with AEM forms 
     */ 
 import java.io.FileInputStream; 
 import java.io.IOException; 
 import javax.servlet.Servlet; 
 import javax.servlet.ServletException; 
 import javax.servlet.ServletOutputStream; 
 import javax.servlet.http.HttpServlet; 
 import javax.servlet.http.HttpServletRequest; 
 import javax.servlet.http.HttpServletResponse; 
 import com.adobe.livecycle.formsservice.client.*; 
 import java.util.*; 
 import java.io.InputStream; 
 import com.adobe.idp.Document; 
 import com.adobe.idp.dsc.clientsdk.ServiceClientFactory; 
 import com.adobe.idp.dsc.clientsdk.ServiceClientFactoryProperties; 
  
 public class RenderFormFragments extends HttpServlet implements Servlet { 
      
     public void doGet(HttpServletRequest req, HttpServletResponse resp) 
         throws ServletException, IOException { 
             doPost(req,resp);  
  
     } 
     public void doPost(HttpServletRequest req, HttpServletResponse resp) 
     throws ServletException, IOException { 
              
         try{ 
             //Set connection properties required to invoke AEM Forms                                 
             Properties connectionProps = new Properties(); 
             connectionProps.setProperty(ServiceClientFactoryProperties.DSC_DEFAULT_SOAP_ENDPOINT, "https://[server]:[port]"); 
             connectionProps.setProperty(ServiceClientFactoryProperties.DSC_TRANSPORT_PROTOCOL,ServiceClientFactoryProperties.DSC_SOAP_PROTOCOL);           
             connectionProps.setProperty(ServiceClientFactoryProperties.DSC_SERVER_TYPE, "JBoss"); 
             connectionProps.setProperty(ServiceClientFactoryProperties.DSC_CREDENTIAL_USERNAME, "administrator"); 
             connectionProps.setProperty(ServiceClientFactoryProperties.DSC_CREDENTIAL_PASSWORD, "password"); 
              
             //Create a ServiceClientFactory object 
             ServiceClientFactory myFactory = ServiceClientFactory.createInstance(connectionProps); 
                  
             //Create a FormsServiceClient object 
             FormsServiceClient formsClient = new FormsServiceClient(myFactory);  
          
             //Set the parameter values for the renderPDFForm method 
             String formName = "Applications/FormsApplication/1.0/FormsFolder/PurchaseOrderDynamic.xdp";   
              
             FileInputStream myFormData = new FileInputStream("C:\\Adobe\Purchase Order US.xml"); 
             Document oInputData = new Document(myFormData); 
                                      
             //Cache the PDF form 
             PDFFormRenderSpec pdfFormRenderSpec = new PDFFormRenderSpec(); 
             pdfFormRenderSpec.setCacheEnabled(new Boolean(true)); 
          
             //Specify URI values that are required to render a form 
             //design based on fragments 
             URLSpec uriValues = new URLSpec();  
             uriValues.setApplicationWebRoot("https://[server]:[port]/FormsServiceClientApp"); 
             uriValues.setContentRootURI("repository:///"); 
             uriValues.setTargetURL("https://[server]:[port]/FormsServiceClientApp/HandleData"); 
                      
             //Invoke the renderPDFForm method and write the  
             //results to a client web browser 
             FormsResult formOut = formsClient.renderPDFForm( 
                         formName,               //formQuery 
                         oInputData,             //inDataDoc 
                         pdfFormRenderSpec,      //PDFFormRenderSpec 
                         uriValues,                //urlSpec 
                         null                    //attachments 
                         ); 
          
             //Create a Document object that stores form data 
             Document myData = formOut.getOutputContent(); 
          
             //Get the content type of the response and 
             //set the HttpServletResponse object’s content type 
             String contentType = myData.getContentType();  
             resp.setContentType(contentType); 
          
             //Create a ServletOutputStream object 
             ServletOutputStream oOutput = resp.getOutputStream(); 
          
             //Create an InputStream object 
             InputStream inputStream = myData.getInputStream(); 
          
             //Write the data stream to the web browser 
             byte[] data = new byte[4096]; 
             int bytesRead = 0; 
             while ((bytesRead = inputStream.read(data)) > 0) 
             { 
                 oOutput.write(data, 0, bytesRead); 
             } 
         }catch (Exception e) { 
              System.out.println("The following exception occurred: "+e.getMessage()); 
       } 
     } 
 }

Schnellstart (SOAP-Modus): Rendern eines Formulars mit aktivierten Rechten mithilfe der Java-API

Im folgenden Codebeispiel wird ein Formular mit aktivierten Rechten an einen Client-Webbrowser gerendert. Die in diesem Codebeispiel festgelegten Verwendungsrechte ermöglichen es dem Benutzer, dem Formular Kommentare hinzuzufügen und Formulardaten zu speichern. (Siehe Rendering Rights-Enabled Forms.)

 /* 
     * This Java Quick Start uses the following JAR files 
     * 1. adobe-forms-client.jar 
     * 2. adobe-livecycle-client.jar 
     * 3. adobe-usermanager-client.jar 
    * 4. activation.jar (required for SOAP mode) 
    * 5. axis.jar (required for SOAP mode) 
    * 6. commons-codec-1.3.jar (required for SOAP mode) 
    * 7. commons-collections-3.2.jar  (required for SOAP mode) 
    * 8. commons-discovery.jar (required for SOAP mode) 
    * 9. commons-logging.jar (required for SOAP mode) 
    * 10. dom3-xml-apis-2.5.0.jar (required for SOAP mode) 
    * 11. jaxen-1.1-beta-9.jar (required for SOAP mode) 
    * 12. jaxrpc.jar (required for SOAP mode) 
    * 13. log4j.jar (required for SOAP mode) 
    * 14. mail.jar (required for SOAP mode) 
    * 15. saaj.jar (required for SOAP mode) 
    * 16. wsdl4j.jar (required for SOAP mode) 
    * 17. xalan.jar (required for SOAP mode) 
    * 18. xbean.jar (required for SOAP mode) 
    * 19. xercesImpl.jar (required for SOAP mode) 
    * 
     * (Because Forms quick starts are implemented as Java servlets, it is  
     * not necessary to include J2EE specific JAR files - the Java project 
     * that contains this quick start is exported as a WAR file which 
     * is deployed to the J2EE application server) 
     * 
     * These JAR files are located in the following path: 
     * <install directory>/sdk/client-libs/common 
     * 
     * For complete details about the location of these JAR files,  
     * see "Including AEM Forms library files" in Programming with AEM forms 
     */ 
 import java.io.IOException; 
 import javax.servlet.Servlet; 
 import javax.servlet.ServletException; 
 import javax.servlet.ServletOutputStream; 
 import javax.servlet.http.HttpServlet; 
 import javax.servlet.http.HttpServletRequest; 
 import javax.servlet.http.HttpServletResponse; 
 import com.adobe.livecycle.formsservice.client.*; 
 import java.util.*; 
 import java.io.InputStream; 
 import com.adobe.idp.Document; 
 import com.adobe.idp.dsc.clientsdk.ServiceClientFactory; 
 import com.adobe.idp.dsc.clientsdk.ServiceClientFactoryProperties; 
  
  
 public class RenderUsageRightsForms extends HttpServlet implements Servlet { 
  
     public void doGet(HttpServletRequest req, HttpServletResponse resp) 
         throws ServletException, IOException { 
             doPost(req,resp); 
     } 
  
     public void doPost(HttpServletRequest req, HttpServletResponse resp) 
         throws ServletException, IOException { 
              
     try{ 
         //Set connection properties required to invoke AEM Forms                                 
         Properties connectionProps = new Properties(); 
         connectionProps.setProperty(ServiceClientFactoryProperties.DSC_DEFAULT_SOAP_ENDPOINT, "https://[server]:[port]"); 
         connectionProps.setProperty(ServiceClientFactoryProperties.DSC_TRANSPORT_PROTOCOL,ServiceClientFactoryProperties.DSC_SOAP_PROTOCOL);           
         connectionProps.setProperty(ServiceClientFactoryProperties.DSC_SERVER_TYPE, "JBoss"); 
         connectionProps.setProperty(ServiceClientFactoryProperties.DSC_CREDENTIAL_USERNAME, "administrator"); 
         connectionProps.setProperty(ServiceClientFactoryProperties.DSC_CREDENTIAL_PASSWORD, "password"); 
              
         //Create a FormsServiceClient object 
         ServiceClientFactory myFactory = ServiceClientFactory.createInstance(connectionProps); 
         FormsServiceClient formsClient = new FormsServiceClient(myFactory);  
          
         //Set parameter values for the renderPDFFormWithUsageRights method 
         String formName = "Applications/FormsApplication/1.0/FormsFolder/Loan.xdp";  
         byte[]    cData = "".getBytes(); 
         Document oInputData = new Document(cData); 
          
         //Set run-time options 
         PDFFormRenderSpec pdfFormRenderSpec = new PDFFormRenderSpec(); 
         pdfFormRenderSpec.setCacheEnabled(new Boolean(true)); 
          
         //Set usage-rights run-time options 
         ReaderExtensionSpec reOptions = new ReaderExtensionSpec(); 
         reOptions.setReCredentialAlias("RE2"); 
         reOptions.setReCommenting(true); 
         reOptions.setReFillIn(true); 
          
         //Specify URI values required to render the form 
         URLSpec uriValues = new URLSpec();  
         uriValues.setApplicationWebRoot("https://[server]:[port]/FormsQS"); 
         uriValues.setContentRootURI("repository:///"); 
         uriValues.setTargetURL("https://[server]:[port]/FormsQS/HandleData"); 
          
         //Render a rights-enabled PDF form 
         FormsResult formOut = formsClient.renderPDFFormWithUsageRights( 
             formName,            //formQuery 
             oInputData,          //inDataDoc  
             pdfFormRenderSpec,   //renderFormOptionsSpec 
             reOptions,              //applicationWebRoot 
             uriValues            //targetURL 
             ); 
          
         //Create a Document object that stores form data 
         Document myData = formOut.getOutputContent(); 
          
         //Get the content type of the response and 
         //set the HttpServletResponse objects content type 
         String contentType = myData.getContentType();  
         resp.setContentType(contentType); 
          
         //Create a ServletOutputStream object 
         ServletOutputStream oOutput = resp.getOutputStream(); 
          
         //Create an InputStream object 
         InputStream inputStream = myData.getInputStream(); 
          
         //Write the data stream to the web browser 
         byte[] data = new byte[4096]; 
         int bytesRead = 0; 
         while ((bytesRead = inputStream.read(data)) > 0) 
         { 
             oOutput.write(data, 0, bytesRead); 
         } 
          
     }catch (Exception e) { 
          System.out.println("The following exception occurred: "+e.getMessage()); 
       } 
     } 
 } 
  
 

Schnellstart (SOAP-Modus): HTML-Formular mit der Java-API wiedergeben

Im folgenden Codebeispiel wird ein HTML-Formular mithilfe der Java-API des Forms-Diensts wiedergegeben. Dem HTML-Formular wird eine Symbolleiste sowie zwei Dateianlagen hinzugefügt. Darüber hinaus wird der Benutzeragentenwert vom HttpServletRequest -Objekt abgerufen. (Siehe Rendern von Forms als HTML.)

 /* 
     * This Java Quick Start uses the following JAR files 
     * 1. adobe-forms-client.jar 
     * 2. adobe-livecycle-client.jar 
     * 3. adobe-usermanager-client.jar 
    * 4. activation.jar (required for SOAP mode) 
    * 5. axis.jar (required for SOAP mode) 
    * 6. commons-codec-1.3.jar (required for SOAP mode) 
    * 7. commons-collections-3.2.jar  (required for SOAP mode) 
    * 8. commons-discovery.jar (required for SOAP mode) 
    * 9. commons-logging.jar (required for SOAP mode) 
    * 10. dom3-xml-apis-2.5.0.jar (required for SOAP mode) 
    * 11. jaxen-1.1-beta-9.jar (required for SOAP mode) 
    * 12. jaxrpc.jar (required for SOAP mode) 
    * 13. log4j.jar (required for SOAP mode) 
    * 14. mail.jar (required for SOAP mode) 
    * 15. saaj.jar (required for SOAP mode) 
    * 16. wsdl4j.jar (required for SOAP mode) 
    * 17. xalan.jar (required for SOAP mode) 
    * 18. xbean.jar (required for SOAP mode) 
    * 19. xercesImpl.jar (required for SOAP mode) 
    * 
     * (Because Forms quick starts are implemented as Java servlets, it is  
     * not necessary to include J2EE specific JAR files - the Java project 
     * that contains this quick start is exported as a WAR file which 
     * is deployed to the J2EE application server) 
     * 
     * These JAR files are located in the following path: 
     * <install directory>/sdk/client-libs/common 
     * 
     * For complete details about the location of these JAR files,  
     * see "Including AEM Forms library files" in Programming with AEM forms 
     */ 
 import java.io.IOException; 
 import javax.servlet.Servlet; 
 import javax.servlet.ServletException; 
 import javax.servlet.ServletOutputStream; 
 import javax.servlet.http.HttpServlet; 
 import javax.servlet.http.HttpServletRequest; 
 import javax.servlet.http.HttpServletResponse; 
 import com.adobe.livecycle.formsservice.client.*; 
  
 import java.util.*; 
 import java.io.InputStream; 
 import com.adobe.idp.Document; 
 import com.adobe.idp.dsc.clientsdk.ServiceClientFactory; 
 import java.io.FileInputStream; 
  
  
 public class RenderHTMLForms extends HttpServlet implements Servlet { 
      
     public void doGet(HttpServletRequest req, HttpServletResponse resp) 
         throws ServletException, IOException { 
             doPost(req,resp);  
     } 
      
     public void doPost(HttpServletRequest req, HttpServletResponse resp) 
         throws ServletException, IOException { 
              
             try{ 
              
                 //Set connection properties required to invoke AEM Forms     
                 Properties connectionProps = new Properties(); 
                 connectionProps.setProperty("DSC_DEFAULT_SOAP_ENDPOINT", "https://[server]:[port]"); 
                 connectionProps.setProperty("DSC_TRANSPORT_PROTOCOL","SOAP");           
                 connectionProps.setProperty("DSC_SERVER_TYPE", "JBoss"); 
                 connectionProps.setProperty("DSC_CREDENTIAL_USERNAME", "administrator"); 
                 connectionProps.setProperty("DSC_CREDENTIAL_PASSWORD", "password"); 
              
                 //Create a FormsServiceClient object 
                 ServiceClientFactory myFactory = ServiceClientFactory.createInstance(connectionProps); 
                 FormsServiceClient formsClient = new FormsServiceClient(myFactory);  
          
                 //Set parameter values for the (Deprecated) renderHTMLForm method 
                 String formName = "Applications/FormsApplication/1.0/FormsFolder/Loan.xdp";   
                 byte[]    cData = "".getBytes(); 
                 Document oInputData = new Document(cData); 
                  
                 //Obtain the user agent value from the HttpServletRequest object 
                 String userAgent = req.getHeader("user-agent"); 
                                      
                 //Create an HTMLRenderSpec object to store HTML run-time options 
                 HTMLRenderSpec htmlRS = new HTMLRenderSpec(); 
                 htmlRS.setHTMLToolbar(HTMLToolbar.Vertical); 
                                                          
                 //Specify the locale value 
                 htmlRS.setLocale("en_US"); 
                          
                 //Render the HTML form within full HTML tags 
                 htmlRS.setOutputType(OutputType.FullHTMLTags); 
                  
                 //Set style information that controls the presentation of the HTML form 
                 htmlRS.setStyleGenerationLevel(StyleGenerationLevel.InlineAndInternalStyles); 
                                                                  
                 //Specify URI values that are required to render a form 
                 URLSpec uriValues = new URLSpec();  
                 uriValues.setApplicationWebRoot("https://[server]:[port]/FormsQS"); 
                 uriValues.setContentRootURI("repository:///"); 
                 uriValues.setTargetURL("https://[server]:[port]/FormsQS/HandleSubmittedHTMLForm"); 
                                  
                 //Specify file attachments 
                 FileInputStream myForm = new FileInputStream("C:\\Attach1.txt");  
                 Document attachment1 = new Document(myForm); 
                 FileInputStream myForm2 = new FileInputStream("C:\\Attach2.txt");  
                 Document attachment2 = new Document(myForm2); 
                 String fileName = "Attach1.txt"; 
                 String fileName2 = "Attach2.txt"; 
                      
                 Map fileAttachments = new HashMap(); 
                 fileAttachments.put(fileName, attachment1);  
                 fileAttachments.put(fileName2, attachment2);  
                          
                 //Invoke the (Deprecated) renderHTMLForm method 
                 FormsResult formOut = formsClient.renderHTMLForm( 
                     formName,               //formQuery 
                     TransformTo.MSDHTML,    //transformTo 
                     oInputData,             //inDataDoc 
                     htmlRS,                    //renderHTMLSpec 
                     userAgent,                //User Agent 
                     uriValues,                //urlSpec 
                     fileAttachments            //attachments 
                     ); 
          
                 //Create a Document object that stores form data 
                 Document myData = formOut.getOutputContent(); 
          
                 //Get the content type of the response and 
                 //set the HttpServletResponse object’s content type 
                 String contentType = myData.getContentType();  
                 resp.setContentType(contentType); 
          
                 //Create a ServletOutputStream object 
                 ServletOutputStream oOutput = resp.getOutputStream(); 
          
                 //Create an InputStream object 
                 InputStream inputStream = myData.getInputStream(); 
          
                 //Write the data stream to the web browser 
                 byte[] data = new byte[4096]; 
                 int bytesRead = 0; 
                 while ((bytesRead = inputStream.read(data)) > 0) 
                 { 
                     oOutput.write(data, 0, bytesRead); 
                 } 
          
                 }catch (Exception e) { 
                      System.out.println("The following exception occurred: "+e.getMessage()); 
                      } 
             } 
 } 
  
  
  
 

Schnellstart (SOAP-Modus): Wiedergabe eines HTML-Formulars, das eine CSS-Datei mit der Java-API verwendet

Im folgenden Codebeispiel wird ein HTML-Formular mithilfe der Client-API des Forms-Dienstes gerendert. Der Name der benutzerdefinierten CSS-Datei, auf die verwiesen wird, ist custom.css. (Siehe Rendern von HTML Forms mit benutzerdefinierten CSS-Dateien.)

 /* 
     * This Java Quick Start uses the following JAR files 
     * 1. adobe-forms-client.jar 
     * 2. adobe-livecycle-client.jar 
     * 3. adobe-usermanager-client.jar 
    * 4. activation.jar (required for SOAP mode) 
    * 5. axis.jar (required for SOAP mode) 
    * 6. commons-codec-1.3.jar (required for SOAP mode) 
    * 7. commons-collections-3.2.jar  (required for SOAP mode) 
    * 8. commons-discovery.jar (required for SOAP mode) 
    * 9. commons-logging.jar (required for SOAP mode) 
    * 10. dom3-xml-apis-2.5.0.jar (required for SOAP mode) 
    * 11. jaxen-1.1-beta-9.jar (required for SOAP mode) 
    * 12. jaxrpc.jar (required for SOAP mode) 
    * 13. log4j.jar (required for SOAP mode) 
    * 14. mail.jar (required for SOAP mode) 
    * 15. saaj.jar (required for SOAP mode) 
    * 16. wsdl4j.jar (required for SOAP mode) 
    * 17. xalan.jar (required for SOAP mode) 
    * 18. xbean.jar (required for SOAP mode) 
    * 19. xercesImpl.jar (required for SOAP mode) 
     * 
     * (Because Forms quick starts are implemented as Java servlets, it is  
     * not necessary to include J2EE specific JAR files - the Java project 
     * that contains this quick start is exported as a WAR file which 
     * is deployed to the J2EE application server) 
     * 
     * These JAR files are located in the following path: 
     * <install directory>/sdk/client-libs/common 
     * 
     * For complete details about the location of these JAR files,  
     * see "Including AEM Forms library files" in Programming with AEM forms 
     */ 
 import java.io.IOException; 
 import javax.servlet.Servlet; 
 import javax.servlet.ServletException; 
 import javax.servlet.ServletOutputStream; 
 import javax.servlet.http.HttpServlet; 
 import javax.servlet.http.HttpServletRequest; 
 import javax.servlet.http.HttpServletResponse; 
 import com.adobe.livecycle.formsservice.client.*; 
  
 import java.util.*; 
 import java.io.InputStream; 
 import com.adobe.idp.Document; 
 import com.adobe.idp.dsc.clientsdk.ServiceClientFactory; 
 import com.adobe.idp.dsc.clientsdk.ServiceClientFactoryProperties; 
  
 import java.io.FileInputStream; 
  
  
 public class RenderHTMLCSS extends HttpServlet implements Servlet { 
      
     public void doGet(HttpServletRequest req, HttpServletResponse resp) 
         throws ServletException, IOException { 
             doPost(req,resp);  
     } 
      
     public void doPost(HttpServletRequest req, HttpServletResponse resp) 
         throws ServletException, IOException { 
              
             try{ 
                 //Set connection properties required to invoke AEM Forms                                 
                 Properties connectionProps = new Properties(); 
                 connectionProps.setProperty(ServiceClientFactoryProperties.DSC_DEFAULT_SOAP_ENDPOINT, "https://[server]:[port]"); 
                 connectionProps.setProperty(ServiceClientFactoryProperties.DSC_TRANSPORT_PROTOCOL,ServiceClientFactoryProperties.DSC_SOAP_PROTOCOL);           
                 connectionProps.setProperty(ServiceClientFactoryProperties.DSC_SERVER_TYPE, "JBoss"); 
                 connectionProps.setProperty(ServiceClientFactoryProperties.DSC_CREDENTIAL_USERNAME, "administrator"); 
                 connectionProps.setProperty(ServiceClientFactoryProperties.DSC_CREDENTIAL_PASSWORD, "password"); 
              
                 //Create a FormsServiceClient object 
                 ServiceClientFactory myFactory = ServiceClientFactory.createInstance(connectionProps); 
                 FormsServiceClient formsClient = new FormsServiceClient(myFactory);  
          
                 //Set parameter values for the (Deprecated) renderHTMLForm method 
                 String formName = "Applications/FormsApplication/1.0/FormsFolder/Loan.xdp";  
                 byte[]    cData = "".getBytes(); 
                 Document oInputData = new Document(cData); 
                 String userAgent = "" ; 
                                      
                 //Create an HTMLRenderSpec object to store HTML run-time options 
                 HTMLRenderSpec htmlRS = new HTMLRenderSpec(); 
                                                                          
                 //Specify the locale value 
                 htmlRS.setLocale("en_US"); 
                  
                 //Specify a custom CSS file to use 
                 htmlRS.setCustomCSSURI("C:\\Adobe\custom.css"); 
                  
                 //Render the HTML form within full HTML tags 
                 htmlRS.setOutputType(OutputType.FullHTMLTags); 
                                                                  
                 //Specify URI values that are required to render a form 
                 URLSpec uriValues = new URLSpec();  
                 uriValues.setApplicationWebRoot("https://[server]:[port]/FormsQS"); 
                 uriValues.setContentRootURI("repository:///"); 
                 uriValues.setTargetURL("https://[server]:[port]/FormsQS/HandleData"); 
                                  
                 //Specify file attachments 
                 FileInputStream myForm = new FileInputStream("C:\\Attach1.txt");  
                 Document attachment1 = new Document(myForm); 
                 FileInputStream myForm2 = new FileInputStream("C:\\Attach2.txt");  
                 Document attachment2 = new Document(myForm2); 
                 String fileName = "Attach1.txt"; 
                 String fileName2 = "Attach2.txt"; 
                      
                 Map fileAttachments = new HashMap(); 
                 fileAttachments.put(fileName, attachment1);  
                 fileAttachments.put(fileName2, attachment2);  
                          
                 //Invoke the (Deprecated) renderHTMLForm method 
                 FormsResult formOut = formsClient.renderHTMLForm( 
                     formName,               //formQuery 
                     TransformTo.MSDHTML,    //transformTo 
                     oInputData,             //inDataDoc 
                     htmlRS,                    //renderHTMLSpec 
                     userAgent,                //User Agent 
                     uriValues,                //urlSpec 
                     fileAttachments            //attachments 
                     ); 
          
                 //Create a Document object that stores form data 
                 Document myData = formOut.getOutputContent(); 
          
                 //Get the content type of the response and 
                 //set the HttpServletResponse object’s content type 
                 String contentType = myData.getContentType();  
                 resp.setContentType(contentType); 
          
                 //Create a ServletOutputStream object 
                 ServletOutputStream oOutput = resp.getOutputStream(); 
          
                 //Create an InputStream object 
                 InputStream inputStream = myData.getInputStream(); 
          
                 //Write the data stream to the web browser 
                 byte[] data = new byte[4096]; 
                 int bytesRead = 0; 
                 while ((bytesRead = inputStream.read(data)) > 0) 
                 { 
                     oOutput.write(data, 0, bytesRead); 
                 } 
          
             }catch (Exception e) { 
                      System.out.println("The following exception occurred: "+e.getMessage()); 
              } 
     } 
 }

Schnellstart (SOAP-Modus): Rendern eines HTML-Formulars mit einer benutzerdefinierten Symbolleiste mithilfe der Java-API

Im folgenden Codebeispiel wird ein HTML-Formular mit einer Symbolleiste auf Französisch dargestellt. Der Speicherort von fscmenu.xml ist C:\Adobe (dieser Ordner muss sich auf dem Server befinden, der AEM Forms hostet). Beachten Sie, dass der Gebietsschemawert fr_FR ist. Der Abschnitt, der beschreibt, wie ein HTML-Formular mit einer benutzerdefinierten Symbolleiste wiedergegeben wird, zeigt die Syntax der Datei fscmenu.xml, die in diesem Schnellstart verwendet wird. (Siehe Rendern von HTML Forms mit benutzerdefinierten Symbolleisten.)

 /* 
     * This Java Quick Start uses the following JAR files 
     * 1. adobe-forms-client.jar 
     * 2. adobe-livecycle-client.jar 
     * 3. adobe-usermanager-client.jar 
    * 4. activation.jar (required for SOAP mode) 
    * 5. axis.jar (required for SOAP mode) 
    * 6. commons-codec-1.3.jar (required for SOAP mode) 
    * 7. commons-collections-3.2.jar  (required for SOAP mode) 
    * 8. commons-discovery.jar (required for SOAP mode) 
    * 9. commons-logging.jar (required for SOAP mode) 
    * 10. dom3-xml-apis-2.5.0.jar (required for SOAP mode) 
    * 11. jaxen-1.1-beta-9.jar (required for SOAP mode) 
    * 12. jaxrpc.jar (required for SOAP mode) 
    * 13. log4j.jar (required for SOAP mode) 
    * 14. mail.jar (required for SOAP mode) 
    * 15. saaj.jar (required for SOAP mode) 
    * 16. wsdl4j.jar (required for SOAP mode) 
    * 17. xalan.jar (required for SOAP mode) 
    * 18. xbean.jar (required for SOAP mode) 
    * 19. xercesImpl.jar (required for SOAP mode) 
    * 
     * (Because Forms quick starts are implemented as Java servlets, it is  
     * not necessary to include J2EE specific JAR files - the Java project 
     * that contains this quick start is exported as a WAR file which 
     * is deployed to the J2EE application server) 
     * 
     * These JAR files are located in the following path: 
     * <install directory>/sdk/client-libs/common 
     * 
     * For complete details about the location of these JAR files,  
     * see "Including AEM Forms library files" in Programming with AEM forms 
     */ 
 import java.io.IOException; 
 import javax.servlet.Servlet; 
 import javax.servlet.ServletException; 
 import javax.servlet.ServletOutputStream; 
 import javax.servlet.http.HttpServlet; 
 import javax.servlet.http.HttpServletRequest; 
 import javax.servlet.http.HttpServletResponse; 
 import com.adobe.livecycle.formsservice.client.*; 
  
 import java.util.*; 
 import java.io.InputStream; 
 import com.adobe.idp.Document; 
 import com.adobe.idp.dsc.clientsdk.ServiceClientFactory; 
 import java.io.FileInputStream; 
  
  
 public class RenderCustomToolbar extends HttpServlet implements Servlet { 
      
     public void doGet(HttpServletRequest req, HttpServletResponse resp) 
         throws ServletException, IOException { 
             doPost(req,resp);  
     } 
      
     public void doPost(HttpServletRequest req, HttpServletResponse resp) 
         throws ServletException, IOException { 
              
             try{ 
                 //Set connection properties required to invoke AEM Forms     
                 Properties connectionProps = new Properties(); 
                 connectionProps.setProperty("DSC_DEFAULT_SOAP_ENDPOINT", "https://[server]:[port]"); 
                 connectionProps.setProperty("DSC_TRANSPORT_PROTOCOL","SOAP");           
                 connectionProps.setProperty("DSC_SERVER_TYPE", "JBoss"); 
                 connectionProps.setProperty("DSC_CREDENTIAL_USERNAME", "administrator"); 
                 connectionProps.setProperty("DSC_CREDENTIAL_PASSWORD", "password"); 
              
                 //Create a FormsServiceClient object 
                 ServiceClientFactory myFactory = ServiceClientFactory.createInstance(connectionProps); 
                 FormsServiceClient formsClient = new FormsServiceClient(myFactory);  
          
                 //Set parameter values for the renderHTMLForm method 
                 String formName = "Applications/FormsApplication/1.0/FormsFolder/Loan.xdp";   
                 byte[]    cData = "".getBytes(); 
                 Document oInputData = new Document(cData); 
                 String userAgent = "" ; 
                                      
                 //Create an HTMLRenderSpec object to store HTML run-time options 
                 HTMLRenderSpec htmlRS = new HTMLRenderSpec(); 
                 htmlRS.setHTMLToolbar(HTMLToolbar.Vertical); 
                                                          
                 //Specify the URI location of the  
                 // fscmenu.xml file that contains French 
                 htmlRS.setToolbarURI("C:\\Adobe"); 
                  
                 //Specify the locale value 
                 htmlRS.setLocale("fr_FR"); 
                                  
                 //Render the HTML form within full HTML tags 
                 htmlRS.setOutputType(OutputType.FullHTMLTags); 
                                                                  
                 //Specify URI values that are required to render a form 
                 URLSpec uriValues = new URLSpec();  
                 uriValues.setApplicationWebRoot("https://[server]:[port]/FormsQS"); 
                 uriValues.setContentRootURI("repository:///"); 
                 uriValues.setTargetURL("https://[server]:[port]/FormsQS/HandleData"); 
                                  
                 //Specify file attachments 
                 FileInputStream myForm = new FileInputStream("C:\\Attach1.txt");  
                 Document attachment1 = new Document(myForm); 
                 FileInputStream myForm2 = new FileInputStream("C:\\Attach2.txt");  
                 Document attachment2 = new Document(myForm2); 
                 String fileName = "Attach1.txt"; 
                 String fileName2 = "Attach2.txt"; 
                      
                 Map fileAttachments = new HashMap(); 
                 fileAttachments.put(fileName, attachment1);  
                 fileAttachments.put(fileName2, attachment2);  
                          
                 //Invoke the renderHTMLForm method 
                 FormsResult formOut = formsClient.renderHTMLForm( 
                     formName,               //formQuery 
                     TransformTo.MSDHTML,    //transformTo 
                     oInputData,             //inDataDoc 
                     htmlRS,                    //renderHTMLSpec 
                     userAgent,                //User Agent 
                     uriValues,                //urlSpec 
                     fileAttachments            //attachments 
                     ); 
          
                 //Create a Document object that stores form data 
                 Document myData = formOut.getOutputContent(); 
          
                 //Get the content type of the response and 
                 //set the HttpServletResponse object’s content type 
                 String contentType = myData.getContentType();  
                 resp.setContentType(contentType); 
          
                 //Create a ServletOutputStream object 
                 ServletOutputStream oOutput = resp.getOutputStream(); 
          
                 //Create an InputStream object 
                 InputStream inputStream = myData.getInputStream(); 
          
                 //Write the data stream to the web browser 
                 byte[] data = new byte[4096]; 
                 int bytesRead = 0; 
                 while ((bytesRead = inputStream.read(data)) > 0) 
                 { 
                     oOutput.write(data, 0, bytesRead); 
                 } 
          
                 }catch (Exception e) { 
                      System.out.println("The following exception occurred: "+e.getMessage()); 
                      } 
             } 
 } 
 

Schnellstart (SOAP-Modus): Umgang mit als XML gesendeten PDF forms mithilfe der Java-API

Im folgenden Codebeispiel wird ein Formular verarbeitet, das als XML gesendet wird. Der an die processFormSubmission-Methode übergebene Content-Type-Wert ist CONTENT_TYPE=text/xml. Die Werte, die den Feldern mortgageAmount, lastName und firstName entsprechen, werden angezeigt. In diesem Schnellstart wird eine benutzerdefinierte Methode mit dem Namen getNodeText verwendet. Sie akzeptiert eine org.w3c.dom.Document-Instanz und einen Zeichenfolgenwert, der den Knotennamen angibt. Diese Methode gibt einen Zeichenfolgenwert zurück, der den Wert des Knotens darstellt. (Siehe Handhabung der übermittelten Forms.)

 /* 
     * This Java Quick Start uses the following JAR files 
     * 1. adobe-forms-client.jar 
     * 2. adobe-livecycle-client.jar 
     * 3. adobe-usermanager-client.jar 
    * 4. activation.jar (required for SOAP mode) 
    * 5. axis.jar (required for SOAP mode) 
    * 6. commons-codec-1.3.jar (required for SOAP mode) 
    * 7. commons-collections-3.2.jar  (required for SOAP mode) 
    * 9. commons-discovery.jar (required for SOAP mode) 
    * 9. commons-logging.jar (required for SOAP mode) 
    * 10. dom3-xml-apis-2.5.0.jar (required for SOAP mode) 
    * 11. jaxen-1.1-beta-9.jar (required for SOAP mode) 
    * 12. jaxrpc.jar (required for SOAP mode) 
    * 13. log4j.jar (required for SOAP mode) 
    * 14. mail.jar (required for SOAP mode) 
    * 15. saaj.jar (required for SOAP mode) 
    * 16. wsdl4j.jar (required for SOAP mode) 
    * 17. xalan.jar (required for SOAP mode) 
    * 18. xbean.jar (required for SOAP mode) 
    * 19. xercesImpl.jar (required for SOAP mode) 
    * 
     * (Because Forms quick starts are implemented as Java servlets, it is  
     * not necessary to include J2EE specific JAR files - the Java project 
     * that contains this quick start is exported as a WAR file which 
     * is deployed to the J2EE application server) 
     * 
     * These JAR files are located in the following path: 
     * <install directory>/sdk/client-libs/common 
     * 
     * For complete details about the location of these JAR files,  
     * see "Including AEM Forms library files" in Programming with AEM forms 
     */ 
 import java.io.IOException; 
 import javax.servlet.Servlet; 
 import javax.servlet.ServletException; 
 import javax.servlet.http.HttpServlet; 
 import javax.servlet.http.HttpServletRequest; 
 import javax.servlet.http.HttpServletResponse; 
 import com.adobe.livecycle.formsservice.client.*; 
 import java.util.*; 
 import java.io.DataInputStream; 
 import java.io.File; 
 import java.io.InputStream; 
 import java.io.PrintWriter; 
 import com.adobe.idp.Document; 
 import com.adobe.idp.dsc.clientsdk.ServiceClientFactory; 
 import com.adobe.idp.dsc.clientsdk.ServiceClientFactoryProperties; 
  
 //Import DOM libraries 
 import org.w3c.dom.NodeList; 
 import org.w3c.dom.Node; 
 import javax.xml.parsers.*; 
  
 public class HandleData extends HttpServlet implements Servlet { 
  
      
     public void doGet(HttpServletRequest req, HttpServletResponse resp) 
         throws ServletException, IOException { 
                 doPost(req,resp); 
         } 
      
     public void doPost(HttpServletRequest req, HttpServletResponse resp) 
         throws ServletException, IOException { 
              
         try{ 
             PrintWriter pp = resp.getWriter();      
              
             //Set connection properties required to invoke AEM Forms                                 
             Properties connectionProps = new Properties(); 
             connectionProps.setProperty(ServiceClientFactoryProperties.DSC_DEFAULT_SOAP_ENDPOINT, "https://[server]:[port]"); 
             connectionProps.setProperty(ServiceClientFactoryProperties.DSC_TRANSPORT_PROTOCOL,ServiceClientFactoryProperties.DSC_SOAP_PROTOCOL);           
             connectionProps.setProperty(ServiceClientFactoryProperties.DSC_SERVER_TYPE, "JBoss"); 
             connectionProps.setProperty(ServiceClientFactoryProperties.DSC_CREDENTIAL_USERNAME, "administrator"); 
             connectionProps.setProperty(ServiceClientFactoryProperties.DSC_CREDENTIAL_PASSWORD, "password"); 
              
             //Create a ServiceClientFactory object 
             ServiceClientFactory myFactory = ServiceClientFactory.createInstance(connectionProps); 
                  
             //Create a FormsServiceClient object 
             FormsServiceClient formsClient = new FormsServiceClient(myFactory);  
          
             //Get Form data to pass to the processFormSubmission method 
             Document formData = new Document(req.getInputStream());  
                          
             //Set run-time options 
              RenderOptionsSpec processSpec = new RenderOptionsSpec();  
              processSpec.setLocale("en_US"); 
              
             //Invoke the processFormSubmission method 
             FormsResult formOut = formsClient.processFormSubmission(formData, 
             "CONTENT_TYPE=text/xml", 
             "", 
             processSpec); 
              
             //Get the processing state 
             short processState = formOut.getAction(); 
                          
             //Determine if the form data is ready to be processed 
             //This code example checks only for submitted data (value is 0) 
             if (processState == 0)  
             { 
               //Determine the content type of the data 
               String myContentType = formOut.getContentType(); 
               System.out.println("THE CONTENT TYPS IS" +myContentType); 
              
                if (myContentType.equals("application/vnd.adobe.xdp+xml"))    { 
              
                 //Get the form data 
                 Document formOutput = formOut.getOutputContent();  
                 InputStream formInputStream = new DataInputStream(formOutput.getInputStream());  
                  
                 //Create DocumentBuilderFactory and DocumentBuilder objects 
                 DocumentBuilderFactory factory = DocumentBuilderFactory.newInstance(); 
                 DocumentBuilder builder = factory.newDocumentBuilder(); 
                 org.w3c.dom.Document myDOM = builder.parse(formInputStream); 
                                          
                 //Call for each field in the form 
                 String Amount = getNodeText("mortgageAmount", myDOM); 
                 String myLastName =  getNodeText("lastName", myDOM);  
                 String myFirstName = getNodeText("firstName", myDOM); 
                  
                 //Write the form data to the web browser 
                 pp.println("<p> The form data is :<br><br>" + 
                         "<li> The mortgage amount is "+ Amount+"" + 
                         "<li> Last name is "+ myLastName+"" + 
                         "<li> First name is "+ myFirstName+"")    ; 
                  
                          
                 } 
              } 
             } 
         catch (Exception e) { 
              e.printStackTrace(); 
           } 
     } 
          
     //This method returns the value of the specified node 
     private String getNodeText(String nodeName, org.w3c.dom.Document myDOM) 
     { 
       //Get the XML node by name 
       NodeList oList = myDOM.getElementsByTagName(nodeName); 
       Node myNode = oList.item(0);  
       NodeList oChildNodes = myNode.getChildNodes(); 
                                   
      String sText = ""; 
      for (int i = 0; i < oChildNodes.getLength(); i++) 
      { 
          Node oItem = oChildNodes.item(i); 
         if (oItem.getNodeType() == Node.TEXT_NODE) 
          { 
            sText = sText.concat(oItem.getNodeValue()); 
          } 
      } 
     return sText; 
     } 
 } 
 
HINWEIS

Wenn Sie ein com.adobe.idp.Document-Objekt und ein org.w3c.dom.Document in derselben Anwendung verwenden, müssen Sie org.w3c.dom.Document vollständig qualifizieren.

Schnellstart (SOAP-Modus): Umgang mit als PDF gesendeten PDF forms mit der Java-API

Im folgenden Codebeispiel wird ein Formular verarbeitet, das als PDF-Daten gesendet wird. Der an die processFormSubmission-Methode übergebene Content-Type-Wert ist CONTENT_TYPE=application/pdf. Das gesendete Formular wird als PDF-Datei mit dem Namen tempPDF.pdf gespeichert. Da das Formular als PDF gesendet wird, können auch Dateianlagen abgerufen werden. Alle Dateianlagen werden als JPEG-Dateien gespeichert. (Siehe Handhabung der übermittelten Forms.)

 /* 
     * This Java Quick Start uses the following JAR files 
     * 1. adobe-forms-client.jar 
     * 2. adobe-livecycle-client.jar 
     * 3. adobe-usermanager-client.jar 
    * 4. activation.jar (required for SOAP mode) 
    * 5. axis.jar (required for SOAP mode) 
    * 6. commons-codec-1.3.jar (required for SOAP mode) 
    * 7. commons-collections-3.2.jar  (required for SOAP mode) 
    * 8. commons-discovery.jar (required for SOAP mode) 
    * 9. commons-logging.jar (required for SOAP mode) 
    * 10. dom3-xml-apis-2.5.0.jar (required for SOAP mode) 
    * 11. jaxen-1.1-beta-9.jar (required for SOAP mode) 
    * 12. jaxrpc.jar (required for SOAP mode) 
    * 13. log4j.jar (required for SOAP mode) 
    * 14. mail.jar (required for SOAP mode) 
    * 15. saaj.jar (required for SOAP mode) 
    * 16. wsdl4j.jar (required for SOAP mode) 
    * 17. xalan.jar (required for SOAP mode) 
    * 18. xbean.jar (required for SOAP mode) 
    * 19. xercesImpl.jar (required for SOAP mode) 
    * 
     * (Because Forms quick starts are implemented as Java servlets, it is  
     * not necessary to include J2EE specific JAR files - the Java project 
     * that contains this quick start is exported as a WAR file which 
     * is deployed to the J2EE application server) 
     * 
     * These JAR files are located in the following path: 
     * <install directory>/sdk/client-libs/common 
     * 
     * For complete details about the location of these JAR files,  
     * see "Including AEM Forms library files" in Programming with AEM forms 
     */ 
 import java.io.IOException; 
 import javax.servlet.Servlet; 
 import javax.servlet.ServletException; 
 import javax.servlet.http.HttpServlet; 
 import javax.servlet.http.HttpServletRequest; 
 import javax.servlet.http.HttpServletResponse; 
 import com.adobe.livecycle.formsservice.client.*; 
 import java.util.*; 
 import java.io.DataInputStream; 
 import java.io.File; 
 import java.io.InputStream; 
 import java.io.PrintWriter; 
 import com.adobe.idp.Document; 
 import com.adobe.idp.dsc.clientsdk.ServiceClientFactory; 
 import com.adobe.idp.dsc.clientsdk.ServiceClientFactoryProperties; 
  
 //Import DOM libraries 
 import org.w3c.dom.NodeList; 
 import org.w3c.dom.Node; 
 import javax.xml.parsers.*; 
  
 public class HandleSubmittedPDFData extends HttpServlet implements Servlet { 
  
      
     public void doGet(HttpServletRequest req, HttpServletResponse resp) 
         throws ServletException, IOException { 
                 doPost(req,resp); 
         } 
      
     public void doPost(HttpServletRequest req, HttpServletResponse resp) 
         throws ServletException, IOException { 
              
         try{ 
             PrintWriter pp = resp.getWriter();      
              
             //Set connection properties required to invoke AEM Forms                                 
             Properties connectionProps = new Properties(); 
             connectionProps.setProperty(ServiceClientFactoryProperties.DSC_DEFAULT_SOAP_ENDPOINT, "https://[server]:[port]"); 
             connectionProps.setProperty(ServiceClientFactoryProperties.DSC_TRANSPORT_PROTOCOL,ServiceClientFactoryProperties.DSC_SOAP_PROTOCOL);           
             connectionProps.setProperty(ServiceClientFactoryProperties.DSC_SERVER_TYPE, "JBoss"); 
             connectionProps.setProperty(ServiceClientFactoryProperties.DSC_CREDENTIAL_USERNAME, "administrator"); 
             connectionProps.setProperty(ServiceClientFactoryProperties.DSC_CREDENTIAL_PASSWORD, "password"); 
              
             //Create a ServiceClientFactory object 
             ServiceClientFactory myFactory = ServiceClientFactory.createInstance(connectionProps); 
                  
             //Create a FormsServiceClient object 
             FormsServiceClient formsClient = new FormsServiceClient(myFactory);  
          
             //Get Form data to pass to the processFormSubmission method 
             Document formData = new Document(req.getInputStream());  
                          
             //Set run-time options 
              RenderOptionsSpec processSpec = new RenderOptionsSpec();  
              processSpec.setLocale("en_US"); 
              
             //Invoke the processFormSubmission method 
             FormsResult formOut = formsClient.processFormSubmission(formData, 
             "CONTENT_TYPE=application/pdf", 
             "", 
             processSpec); 
              
             //Determine if the form contains file attachments 
             //It is assumed that file attachments are JPG files 
             List fileAttachments = formOut.getAttachments();  
                                  
             //Create an Iterator object and iterate through  
             //the List object 
             Iterator iter = fileAttachments.iterator();  
             int i = 0 ;  
             while (iter.hasNext()) {  
                 Document file = (Document)iter.next();  
                 file.copyToFile(new File("C:\\Adobe\tempFile"+i+".jpg")); 
                 i++;  
             } 
              
             //Get the processing state 
             short processState = formOut.getAction(); 
                          
             //Determine if the form data is ready to be processed 
             //This code example checks only for submitted data (value is 0) 
             if (processState == 0)  
             { 
               //Determine the content type of the data 
               String myContentType = formOut.getContentType(); 
              
               if (myContentType.equals("application/pdf")){ 
                      
                     //Get the form data 
                     Document myPDFfile = formOut.getOutputContent();  
                                      
                     //Create a PDF object 
                     File myPDFFile = new File("C:\\Adobe\tempPDF.pdf"); 
                      
                     //Populate the PDF file 
                     myPDFfile.copyToFile(myPDFFile);                     
                     pp.println("<p> The PDF file is saved as C:\\Adobe\tempPDF.pdf") ;  
                      
                 } 
               } 
         } 
         catch (Exception e) { 
              e.printStackTrace(); 
           } 
     } 
  
 } 
  
  
 

Schnellstart (SOAP-Modus): Umgang mit HTML-Formularen, die als XML mit der Java-API gesendet wurden

Im folgenden Codebeispiel wird ein HTML-Formular verarbeitet, das als XML-Daten gesendet wird. Der an die processFormSubmission-Methode übergebene Content-Type-Wert ist CONTENT_TYPE=application/x-www-form-urlencoded. Die Werte, die den Feldern mortgageAmount, lastName und firstName entsprechen, werden angezeigt. In diesem Schnellstart wird eine benutzerdefinierte Methode mit dem Namen getNodeText verwendet. Sie akzeptiert eine org.w3c.dom.Document-Instanz und einen Zeichenfolgenwert, der den Knotennamen angibt. Diese Methode gibt einen Zeichenfolgenwert zurück, der den Wert des Knotens darstellt. (Siehe Handhabung der übermittelten Forms.)

 /* 
     * This Java Quick Start uses the following JAR files 
     * 1. adobe-forms-client.jar 
     * 2. adobe-livecycle-client.jar 
     * 3. adobe-usermanager-client.jar 
    * 4. activation.jar (required for SOAP mode) 
    * 5. axis.jar (required for SOAP mode) 
    * 6. commons-codec-1.3.jar (required for SOAP mode) 
    * 7. commons-collections-3.2.jar  (required for SOAP mode) 
    * 8. commons-discovery.jar (required for SOAP mode) 
    * 9. commons-logging.jar (required for SOAP mode) 
    * 10. dom3-xml-apis-2.5.0.jar (required for SOAP mode) 
    * 11. jaxen-1.1-beta-9.jar (required for SOAP mode) 
    * 12. jaxrpc.jar (required for SOAP mode) 
    * 13. log4j.jar (required for SOAP mode) 
    * 14. mail.jar (required for SOAP mode) 
    * 15. saaj.jar (required for SOAP mode) 
    * 16. wsdl4j.jar (required for SOAP mode) 
    * 17. xalan.jar (required for SOAP mode) 
    * 18. xbean.jar (required for SOAP mode) 
    * 19. xercesImpl.jar (required for SOAP mode) 
    * 
     * (Because Forms quick starts are implemented as Java servlets, it is  
     * not necessary to include J2EE specific JAR files - the Java project 
     * that contains this quick start is exported as a WAR file which 
     * is deployed to the J2EE application server) 
     * 
     * These JAR files are located in the following path: 
     * <install directory>/sdk/client-libs/common 
     * 
     * For complete details about the location of these JAR files,  
     * see "Including AEM Forms library files" in Programming with AEM forms 
     */ 
 import java.io.IOException; 
 import javax.servlet.Servlet; 
 import javax.servlet.ServletException; 
 import javax.servlet.http.HttpServlet; 
 import javax.servlet.http.HttpServletRequest; 
 import javax.servlet.http.HttpServletResponse; 
 import com.adobe.livecycle.formsservice.client.*; 
 import java.util.*; 
 import java.io.DataInputStream; 
 import java.io.File; 
 import java.io.InputStream; 
 import java.io.PrintWriter; 
 import com.adobe.idp.Document; 
 import com.adobe.idp.dsc.clientsdk.ServiceClientFactory; 
 import com.adobe.idp.dsc.clientsdk.ServiceClientFactoryProperties; 
  
 //Import DOM libraries 
 import org.w3c.dom.NodeList; 
 import org.w3c.dom.Node; 
 import javax.xml.parsers.*; 
  
 /* 
     * This quick start handles data submitted as XML from a rendered HTML form  
     */ 
 public class HandleSubmittedHTMLForm extends HttpServlet implements Servlet { 
  
      
     public void doGet(HttpServletRequest req, HttpServletResponse resp) 
         throws ServletException, IOException { 
                 doPost(req,resp); 
         } 
      
     public void doPost(HttpServletRequest req, HttpServletResponse resp) 
         throws ServletException, IOException { 
              
         try{ 
             PrintWriter pp = resp.getWriter();      
              
             //Set connection properties required to invoke AEM Forms                                 
             Properties connectionProps = new Properties(); 
             connectionProps.setProperty(ServiceClientFactoryProperties.DSC_DEFAULT_SOAP_ENDPOINT, "https://[server]:[port]"); 
             connectionProps.setProperty(ServiceClientFactoryProperties.DSC_TRANSPORT_PROTOCOL,ServiceClientFactoryProperties.DSC_SOAP_PROTOCOL);           
             connectionProps.setProperty(ServiceClientFactoryProperties.DSC_SERVER_TYPE, "JBoss"); 
             connectionProps.setProperty(ServiceClientFactoryProperties.DSC_CREDENTIAL_USERNAME, "administrator"); 
             connectionProps.setProperty(ServiceClientFactoryProperties.DSC_CREDENTIAL_PASSWORD, "password"); 
              
             //Create a ServiceClientFactory object 
             ServiceClientFactory myFactory = ServiceClientFactory.createInstance(connectionProps); 
                  
             //Create a FormsServiceClient object 
             FormsServiceClient formsClient = new FormsServiceClient(myFactory);  
          
             //Get Form data to pass to the processFormSubmission method 
             Document formData = new Document(req.getInputStream());  
                          
             //Set run-time options 
              RenderOptionsSpec processSpec = new RenderOptionsSpec();  
              processSpec.setLocale("en_US"); 
              
             //Invoke the processFormSubmission method 
             FormsResult formOut = formsClient.processFormSubmission(formData, 
             "CONTENT_TYPE=application/x-www-form-urlencoded", 
             "", 
             processSpec); 
              
             //Get the processing state 
             short processState = formOut.getAction(); 
                          
             //Determine if the form data is ready to be processed 
             //This code example checks only for submitted data (value is 0) 
             if (processState == 0)  
             { 
              
                     //Get the form data 
                     Document formOutput = formOut.getOutputContent();  
                     InputStream formInputStream = new DataInputStream(formOutput.getInputStream());  
                                                      
                     //Create DocumentBuilderFactory and DocumentBuilder objects 
                     DocumentBuilderFactory factory = DocumentBuilderFactory.newInstance(); 
                     DocumentBuilder builder = factory.newDocumentBuilder(); 
                     org.w3c.dom.Document myDOM = builder.parse(formInputStream); 
                                              
                     //Call for each field in the form 
                     String Amount = getNodeText("mortgageAmount", myDOM); 
                     String myLastName =  getNodeText("lastName", myDOM);  
                     String myFirstName = getNodeText("firstName", myDOM); 
                      
                     //Write the form data to the web browser 
                     pp.println("<p> The form data is :<br><br>" + 
                             "<li> The mortgage amount is "+ Amount+"" + 
                             "<li> Last name is "+ myLastName+"" + 
                             "<li> First name is "+ myFirstName+"")    ; 
                      } 
                 } 
             catch (Exception e) { 
                  e.printStackTrace(); 
               } 
         } 
              
         //This method returns the value of the specified node 
         private String getNodeText(String nodeName, org.w3c.dom.Document myDOM) 
         { 
           //Get the XML node by name 
           NodeList oList = myDOM.getElementsByTagName(nodeName); 
           Node myNode = oList.item(0);  
           NodeList oChildNodes = myNode.getChildNodes(); 
                                       
          String sText = ""; 
          for (int i = 0; i < oChildNodes.getLength(); i++) 
          { 
              Node oItem = oChildNodes.item(i); 
             if (oItem.getNodeType() == Node.TEXT_NODE) 
              { 
                sText = sText.concat(oItem.getNodeValue()); 
              } 
          } 
         return sText; 
         } 
     } 
 

Schnellstart (SOAP-Modus): Erstellen von PDF-Dokumenten mit gesendeten XML-Daten mithilfe der Java-API

Das folgende Java-Codebeispiel behandelt Formulardaten, die als XML gesendet werden. Formulardaten werden aus der Formularübermittlung mithilfe der Forms-API abgerufen und an den Output-Dienst gesendet. Die Formulardaten und ein Formularentwurf werden zum Erstellen eines nicht interaktiven PDF-Dokuments verwendet. Das nicht interaktive PDF-Dokument wird in einem Content Services-Knoten mit dem Namen /Company Home/Test Directory gespeichert. Der Name des Formulars wird dynamisch erstellt. Das heißt, der Vor- und Nachname des Benutzers wird zum Benennen der PDF-Datei verwendet. Die Kennung der Ressource des neuen Inhalts wird in den Client-Webbrowser geschrieben. (Siehe Erstellen von PDF-Dokumenten mit gesendeten XML-Daten.)

 /* 
     * This Java Quick Start uses the following JAR files 
     * 1. adobe-forms-client.jar 
     * 2. adobe-livecycle-client.jar 
     * 3. adobe-usermanager-client.jar 
    * 4. activation.jar (required for SOAP mode) 
    * 5. axis.jar (required for SOAP mode) 
    * 6. commons-codec-1.3.jar (required for SOAP mode) 
    * 7. commons-collections-3.2.jar  (required for SOAP mode) 
    * 8. commons-discovery.jar (required for SOAP mode) 
    * 9. commons-logging.jar (required for SOAP mode) 
    * 10. dom3-xml-apis-2.5.0.jar (required for SOAP mode) 
    * 11. jaxen-1.1-beta-9.jar (required for SOAP mode) 
    * 12. jaxrpc.jar (required for SOAP mode) 
    * 13. log4j.jar (required for SOAP mode) 
    * 14. mail.jar (required for SOAP mode) 
    * 15. saaj.jar (required for SOAP mode) 
    * 16. wsdl4j.jar (required for SOAP mode) 
    * 17. xalan.jar (required for SOAP mode) 
    * 18. xbean.jar (required for SOAP mode) 
    * 19. xercesImpl.jar (required for SOAP mode) 
     * 20. adobe-output-client.jar 
     * 21. adobe-contentservices-client.jar 
     * 
     * (Because Forms quick starts are implemented as Java servlets, it is  
     * not necessary to include J2EE specific JAR files - the Java project 
     * that contains this quick start is exported as a WAR file which 
     * is deployed to the J2EE application server) 
     * 
     * These JAR files are located in the following path: 
     * <install directory>/sdk/client-libs/common 
     * 
     * For complete details about the location of these JAR files,  
     * see "Including AEM Forms library files" in Programming with AEM forms 
     */ 
 import java.io.IOException; 
 import javax.servlet.Servlet; 
 import javax.servlet.ServletException; 
 import javax.servlet.http.HttpServlet; 
 import javax.servlet.http.HttpServletRequest; 
 import javax.servlet.http.HttpServletResponse; 
  
 import com.adobe.livecycle.contentservices.client.CRCResult; 
 import com.adobe.livecycle.contentservices.client.impl.DocumentManagementServiceClientImpl; 
 import com.adobe.livecycle.contentservices.client.impl.UpdateVersionType; 
 import com.adobe.livecycle.formsservice.client.*; 
 import com.adobe.livecycle.output.client.OutputClient; 
 import com.adobe.livecycle.output.client.OutputResult; 
 import com.adobe.livecycle.output.client.PDFOutputOptionsSpec; 
 import com.adobe.livecycle.output.client.TransformationFormat; 
  
 import java.util.*; 
 import java.io.DataInputStream; 
 import java.io.File; 
 import java.io.InputStream; 
 import java.io.PrintWriter; 
 import com.adobe.idp.Document; 
 import com.adobe.idp.dsc.InvocationRequest; 
 import com.adobe.idp.dsc.InvocationResponse; 
 import com.adobe.idp.dsc.clientsdk.ServiceClient; 
 import com.adobe.idp.dsc.clientsdk.ServiceClientFactory; 
 import com.adobe.idp.dsc.clientsdk.ServiceClientFactoryProperties; 
  
 //Import DOM libraries 
 import org.w3c.dom.NodeList; 
 import org.w3c.dom.Node; 
 import javax.xml.parsers.*; 
  
 public class HandleDataSendToOutput extends HttpServlet implements Servlet { 
  
      
     public void doGet(HttpServletRequest req, HttpServletResponse resp) 
         throws ServletException, IOException { 
                 doPost(req,resp); 
         } 
      
     public void doPost(HttpServletRequest req, HttpServletResponse resp) 
         throws ServletException, IOException { 
              
         try{ 
             PrintWriter pp = resp.getWriter();      
              
             //Set connection properties required to invoke AEM Forms                                 
             Properties connectionProps = new Properties(); 
             connectionProps.setProperty(ServiceClientFactoryProperties.DSC_DEFAULT_SOAP_ENDPOINT, "https://[server]:[port]"); 
             connectionProps.setProperty(ServiceClientFactoryProperties.DSC_TRANSPORT_PROTOCOL,ServiceClientFactoryProperties.DSC_SOAP_PROTOCOL);           
             connectionProps.setProperty(ServiceClientFactoryProperties.DSC_SERVER_TYPE, "JBoss"); 
             connectionProps.setProperty(ServiceClientFactoryProperties.DSC_CREDENTIAL_USERNAME, "administrator"); 
             connectionProps.setProperty(ServiceClientFactoryProperties.DSC_CREDENTIAL_PASSWORD, "password"); 
              
             //Create a ServiceClientFactory object 
             ServiceClientFactory myFactory = ServiceClientFactory.createInstance(connectionProps); 
                  
             //Create a FormsServiceClient object 
             FormsServiceClient formsClient = new FormsServiceClient(myFactory);  
          
             //Get Form data to pass to the processFormSubmission method 
             Document formData = new Document(req.getInputStream());  
                          
             //Set run-time options 
              RenderOptionsSpec processSpec = new RenderOptionsSpec();  
              processSpec.setLocale("en_US"); 
              
             //Invoke the processFormSubmission method 
             FormsResult formOut = formsClient.processFormSubmission(formData, 
             "CONTENT_TYPE=text/xml", 
             "", 
             processSpec); 
              
             //Get the processing state 
             short processState = formOut.getAction(); 
                          
             //Determine if the form data is ready to be processed 
             //This code example checks only for submitted data (value is 0) 
             if (processState == 0)  
             { 
               //Determine the content type of the data 
               String myContentType = formOut.getContentType(); 
              
               if (myContentType.equals("application/vnd.adobe.xdp+xml"))    { 
              
                 //Get the form data 
                 Document formOutput = formOut.getOutputContent();  
                 InputStream formInputStream = new DataInputStream(formOutput.getInputStream());  
                  
                 //Create DocumentBuilderFactory and DocumentBuilder objects 
                 DocumentBuilderFactory factory = DocumentBuilderFactory.newInstance(); 
                 DocumentBuilder builder = factory.newDocumentBuilder(); 
                 org.w3c.dom.Document myDOM = builder.parse(formInputStream); 
                                          
                 //Call for each field in the form 
                 String Amount = getNodeText("mortgageAmount", myDOM); 
                 String myLastName =  getNodeText("lastName", myDOM);  
                 String myFirstName = getNodeText("firstName", myDOM); 
                  
                 //Write the form data to the web browser 
                 pp.println("<p> The form data is :<br><br>" + 
                         "<li> The mortgage amount is "+ Amount+"" + 
                         "<li> Last name is "+ myLastName+"" + 
                         "<li> First name is "+ myFirstName+"")    ; 
                  
                  
                 //Create a non-interactive PDF document by invoking the Output service 
                 Document myPDFform = GeneratePDFDocument(myFactory, formOutput); 
                  
                 //Create the name of the PDF file to store 
                 String pdfName = "Loan_"+myLastName+"_"+myFirstName+".pdf" ; 
                 String userName = myFirstName+" "+myLastName ;  
                  
                 //Store the PDF form into Content Services (deprecated) 
                 String resourceID = StorePDFDocument(myFactory, myPDFform, pdfName,userName); 
                 pp.println("<p> The pdf document was store in :<br><br>" + 
                         "<li> /Company home "+ 
                         "<li> The identifier value of the new resource is "+ resourceID+""); 
                   } 
             } 
         } 
         catch (Exception e) { 
              e.printStackTrace(); 
           } 
     } 
          
      
     //Store the PDF document in /Company Home/Test Directory using the  
     //AEM Forms Content Service API 
     private String StorePDFDocument(ServiceClientFactory myFactory, com.adobe.idp.Document pdfDoc, String formName, String userName) 
     { 
         try 
         { 
             //Create a DocumentManagementServiceClientImpl object 
             DocumentManagementServiceClientImpl    docManager = new DocumentManagementServiceClientImpl(myFactory); 
              
             //Specify the store and node name 
             String storeName ="SpacesStore";  
             String nodeName = "/Company Home/Test Directory"; 
              
             //Create a MAP instance to store attributes 
             Map<String,Object> inputs = new HashMap<String,Object>(); 
              
             //Specify attributes that belong to the new content 
             String creator = "{https://www.alfresco.org/model/content/1.0}creator"; 
             String description = "{https://www.alfresco.org/model/content/1.0}description";  
              
             inputs.put(creator,userName); 
             inputs.put(description,"A mortgage application form"); 
                                  
             //Store MortgageForm.pdf in /Company Home/Test Directory 
             CRCResult result = docManager.storeContent(storeName,  
                      nodeName, 
                      formName, 
                     "{https://www.alfresco.org/model/content/1.0}content",  
                     pdfDoc, 
                     "UTF-8", 
                     UpdateVersionType.INCREMENT_MAJOR_VERSION, 
                     null, 
                     inputs);  
             //Get the identifier value of the new resource 
             String id = result.getNodeUuid(); 
             return id;  
     } 
         catch (Exception ee) 
         { 
             ee.printStackTrace(); 
         } 
         return null ;  
     } 
      
      
     //This method returns the value of the specified node 
     private com.adobe.idp.Document GeneratePDFDocument(ServiceClientFactory myFactory, com.adobe.idp.Document formData) 
     { 
         try 
         { 
         //Create an OutputClient object 
         OutputClient outClient = new OutputClient(myFactory);  
              
         //Set PDF run-time options     
         com.adobe.livecycle.output.client.PDFOutputOptionsSpec outputOptions = new PDFOutputOptionsSpec(); 
         outputOptions.setLocale("en_US"); 
              
         //Set rendering run-time options 
         com.adobe.livecycle.output.client.RenderOptionsSpec pdfOptions = new com.adobe.livecycle.output.client.RenderOptionsSpec();  
         pdfOptions.setLinearizedPDF(true); 
                                  
         //Create a PDF document             
         OutputResult outputDocument = outClient.generatePDFOutput( 
             TransformationFormat.PDF, 
             "Loan.xdp", 
             "C:\\Adobe", 
             outputOptions, 
             pdfOptions, 
             formData 
         ); 
      
         //Get the Generated PDF file  
         Document ouputDoc = outputDocument.getGeneratedDoc(); 
         return ouputDoc ;  
         } 
         catch (Exception ee) 
         { 
             ee.printStackTrace(); 
         } 
         return null;  
     } 
      
     //This method returns the value of the specified node 
     private String getNodeText(String nodeName, org.w3c.dom.Document myDOM) 
     { 
       //Get the XML node by name 
       NodeList oList = myDOM.getElementsByTagName(nodeName); 
       Node myNode = oList.item(0);  
       NodeList oChildNodes = myNode.getChildNodes(); 
                                   
      String sText = ""; 
      for (int i = 0; i < oChildNodes.getLength(); i++) 
      { 
          Node oItem = oChildNodes.item(i); 
         if (oItem.getNodeType() == Node.TEXT_NODE) 
          { 
            sText = sText.concat(oItem.getNodeValue()); 
          } 
      } 
     return sText; 
     } 
 }

Schnellstart (SOAP-Modus): Vorausfüllen von Forms mit flexiblen Layouts mithilfe der Java-API

Im folgenden Codebeispiel wird ein Formular mit einer dynamischen Datenquelle vorausgefüllt. Das heißt, die Datenquelle wird zur Laufzeit erstellt und ist nicht in einer XML-Datei enthalten oder während der Entwurfsphase erstellt. Dieses Codebeispiel enthält drei benutzerdefinierte Methoden:

  • createDataSource: Erstellt ein org.w3c.dom.Document Objekt, das die Datenquelle darstellt, die zum Vorausfüllen des Formulars verwendet wird. Diese benutzerdefinierte Methode gibt das org.w3c.dom.Document -Objekt zurück.

  • convertDataSource: Konvertiert ein org.w3c.dom.Document Objekt in ein com.adobe.idp.Document Objekt. Diese Methode akzeptiert ein org.w3c.dom.Document -Objekt als Eingabeparameter und gibt ein com.adobe.idp.Document -Objekt zurück.

  • renderPOForm: Verwendet die Java-API des Forms-Dienstes zum Rendern eines dynamischen Bestellformulars. Das com.adobe.idp.Document-Objekt, das von der convertDataSource-Methode zurückgegeben wurde, wird zum Vorausfüllen des Formulars verwendet.

    Alle diese Methoden werden innerhalb der doPost -Methode des Java-Servlets aufgerufen. (Siehe Vorausfüllen von Forms mit flexiblen Layouts.)

/*
* This Java Quick Start uses the following JAR files
* 1. adobe-forms-client.jar
* 2. adobe-livecycle-client.jar
* 3. adobe-usermanager-client.jar
* 4. activation.jar (required for SOAP mode)
* 5. axis.jar (required for SOAP mode)
* 6. commons-codec-1.3.jar (required for SOAP mode)
* 7. commons-collections-3.2.jar (required for SOAP mode)
* 8. commons-discovery.jar (required for SOAP mode)
* 9. commons-logging.jar (required for SOAP mode)
* 10. dom3-xml-apis-2.5.0.jar (required for SOAP mode)
* 11. jaxen-1.1-beta-9.jar (required for SOAP mode)
* 12. jaxrpc.jar (required for SOAP mode)
* 13. log4j.jar (required for SOAP mode)
* 14. mail.jar (required for SOAP mode)
* 15. saaj.jar (required for SOAP mode)
* 16. wsdl4j.jar (required for SOAP mode)
* 17. xalan.jar (required for SOAP mode)
* 18. xbean.jar (required for SOAP mode)
* 19. xercesImpl.jar (required for SOAP mode)
*
* (Because Forms quick starts are implemented as Java servlets, it is
* not necessary to include J2EE specific JAR files - the Java project
* that contains this quick start is exported as a WAR file which
* is deployed to the J2EE application server)
*
* These JAR files are located in the following path:
* <install directory>/sdk/client-libs/common
*
* For complete details about the location of these JAR files,
* see "Including AEM Forms library files" in Programming with AEM forms
*/
import java.io.IOException;
import javax.servlet.Servlet;
import javax.servlet.ServletException;
import javax.servlet.ServletOutputStream;
import javax.servlet.http.HttpServlet;
import javax.servlet.http.HttpServletRequest;
import javax.servlet.http.HttpServletResponse;
import com.adobe.livecycle.formsservice.client. * ;
import java.util. * ;
import java.io.ByteArrayOutputStream;
import java.io.InputStream;
import com.adobe.idp.Document;
import com.adobe.idp.dsc.clientsdk.ServiceClientFactory;
import com.adobe.idp.dsc.clientsdk.ServiceClientFactoryProperties;
import org.w3c.dom.Element;
import javax.xml.parsers. * ;
import javax.xml.transform. * ;
import javax.xml.transform.dom.DOMSource;
import javax.xml.transform.stream.StreamResult;
public class RenderDynamicForm extends HttpServlet implements Servlet {
 public void doGet(HttpServletRequest req, HttpServletResponse resp)
 throws ServletException,
 IOException {
  doPost(req, resp);
 }
 public void doPost(HttpServletRequest req, HttpServletResponse resp)
 throws ServletException,
 IOException {
  //Render a dynamic purchase order form
  //Create an org.w3c.dom.Document object
  org.w3c.dom.Document myDom = createDataSource();
  //Convert the org.w3c.dom.Document object
  //to a com.adobe.idp.Document object
  com.adobe.idp.Document formData = convertDataSource(myDom);
  //Render the dynamic form using data located within the
  //com.adobe.idp.Document object
  renderPOForm(resp, formData);
 }
 //Creates an org.w3c.dom.Document object
 private org.w3c.dom.Document createDataSource() {
  org.w3c.dom.Document document = null;
  try {
   //Create DocumentBuilderFactory and DocumentBuilder objects
   DocumentBuilderFactory factory = DocumentBuilderFactory.newInstance();
   DocumentBuilder builder = factory.newDocumentBuilder();
   //Create a new Document object
   document = builder.newDocument();
   //Create the root element and append it to the XML DOM
   Element root = (Element) document.createElement("transaction");
   document.appendChild(root);
   //Create the header element
   Element header = (Element) document.createElement("header");
   root.appendChild(header);
   //Create the txtPONum element and append it to the
   //header element
   Element txtPONum = (Element) document.createElement("txtPONum");
   txtPONum.appendChild(document.createTextNode("8745236985"));
   header.appendChild(txtPONum);
   //Create the dtmDate element and append it to the
   //header element
   Element dtmDate = (Element) document.createElement("dtmDate");
   dtmDate.appendChild(document.createTextNode("2007-02-08"));
   header.appendChild(dtmDate);
   //Create the orderedByAddress element and append
   //it to the header element
   Element orderedByAddress = (Element) document.createElement("orderedByAddress");
   orderedByAddress.appendChild(document.createTextNode("222, Any Blvd"));
   header.appendChild(orderedByAddress);
   //Create the txtOrderedByPhone element and append
   //it to the header element
   Element txtOrderedByPhone = (Element) document.createElement("txtOrderedByPhone");
   txtOrderedByPhone.appendChild(document.createTextNode("(555) 555-2334"));
   header.appendChild(txtOrderedByPhone);
   //Create the txtOrderedByFax element and append
   //it to the header element
   Element txtOrderedByFax = (Element) document.createElement("txtOrderedByFax");
   txtOrderedByFax.appendChild(document.createTextNode("(555) 555-9334"));
   header.appendChild(txtOrderedByFax);
   //Create the txtOrderedByContactName element and append
   //it to the header element
   Element txtOrderedByContactName = (Element) document.createElement("txtOrderedByContactName");
   txtOrderedByContactName.appendChild(document.createTextNode("Frank Jones"));
   header.appendChild(txtOrderedByContactName);
   //Create the deliverToAddress element and append
   //it to the header element
   Element deliverToAddress = (Element) document.createElement("deliverToAddress");
   deliverToAddress.appendChild(document.createTextNode("555, Any Blvd"));
   header.appendChild(deliverToAddress);
   //Create the txtDeliverToPhone element and append
   //it to the header element
   Element txtDeliverToPhone = (Element) document.createElement("txtDeliverToPhone");
   txtDeliverToPhone.appendChild(document.createTextNode("(555) 555-9098"));
   header.appendChild(txtDeliverToPhone);
   //Create the txtDeliverToFax element and append
   //it to the header element
   Element txtDeliverToFax = (Element) document.createElement("txtDeliverToFax");
   txtDeliverToFax.appendChild(document.createTextNode("(555) 555-9000"));
   header.appendChild(txtDeliverToFax);
   //Create the txtDeliverToContactName element and
   //append it to the header element
   Element txtDeliverToContactName = (Element) document.createElement("txtDeliverToContactName");
   txtDeliverToContactName.appendChild(document.createTextNode("Jerry Johnson"));
   header.appendChild(txtDeliverToContactName);
   //Create the detail element and append it to the root
   Element detail = (Element) document.createElement("detail");
   root.appendChild(detail);

   //Create the txtPartNum element and append it to the
   //detail element
   Element txtPartNum = (Element) document.createElement("txtPartNum");
   txtPartNum.appendChild(document.createTextNode("00010-100"));
   detail.appendChild(txtPartNum);
   //Create the txtDescription element and append it
   //to the detail element
   Element txtDescription = (Element) document.createElement("txtDescription");
   txtDescription.appendChild(document.createTextNode("Monitor"));
   detail.appendChild(txtDescription);
   //Create the numQty element and append it to
   //the detail element
   Element numQty = (Element) document.createElement("numQty");
   numQty.appendChild(document.createTextNode("1"));
   detail.appendChild(numQty);
   //Create the numUnitPrice element and append it
   //to the detail element
   Element numUnitPrice = (Element) document.createElement("numUnitPrice");
   numUnitPrice.appendChild(document.createTextNode("350.00"));
   detail.appendChild(numUnitPrice);
   //Create another detail element named detail2 and
   //append it to root
   Element detail2 = (Element) document.createElement("detail");
   root.appendChild(detail2);
   //Create the txtPartNum element and append it to the
   //detail2 element
   Element txtPartNum2 = (Element) document.createElement("txtPartNum");
   txtPartNum2.appendChild(document.createTextNode("00010-200"));
   detail2.appendChild(txtPartNum2);
   //Create the txtDescription element and append it
   //to the detail2 element
   Element txtDescription2 = (Element) document.createElement("txtDescription");
   txtDescription2.appendChild(document.createTextNode("Desk lamps"));
   detail2.appendChild(txtDescription2);
   //Create the numQty element and append it to the
   //detail2 element
   Element numQty2 = (Element) document.createElement("numQty");
   numQty2.appendChild(document.createTextNode("3"));
   detail2.appendChild(numQty2);
   //Create the NUMUNITPRICE element
   Element numUnitPrice2 = (Element) document.createElement("numUnitPrice");
   numUnitPrice2.appendChild(document.createTextNode("55.00"));
   detail2.appendChild(numUnitPrice2);
  }
  catch(Exception e) {
   System.out.println("The following exception occurred: " + e.getMessage());
  }
  return document;

 }
 //Converts an org.w3c.dom.Document object to a
 //com.adobe.idp.Document object
 private Document convertDataSource(org.w3c.dom.Document myDOM) {
  byte[] mybytes = null;
  try {
   //Create a Java Transformer object
   TransformerFactory transFact = TransformerFactory.newInstance();
   Transformer transForm = transFact.newTransformer();
   //Create a Java ByteArrayOutputStream object
   ByteArrayOutputStream myOutStream = new ByteArrayOutputStream();
   //Create a Java Source object
   javax.xml.transform.dom.DOMSource myInput = new DOMSource(myDOM);
   //Create a Java Result object
   javax.xml.transform.stream.StreamResult myOutput = new StreamResult(myOutStream);
   //Populate the Java ByteArrayOutputStream object
   transForm.transform(myInput, myOutput);
   // Get the size of the ByteArrayOutputStream buffer
   int myByteSize = myOutStream.size();
   //Allocate myByteSize to the byte array
   mybytes = new byte[myByteSize];
   //Copy the content to the byte array
   mybytes = myOutStream.toByteArray();
  }
  catch(Exception e) {
   System.out.println("The following exception occurred: " + e.getMessage());
  }
  //Create a com.adobe.idp.Document object and copy the
  //contents of the byte array
  Document myDocument = new Document(mybytes);
  return myDocument;
 }
 //Render the purchase order form using the specified
 //com.adobe.idp.Document object
 private void renderPOForm(HttpServletResponse resp, Document formData) {
  try {
   //Set connection properties required to invoke AEM Forms
   Properties connectionProps = new Properties();
   connectionProps.setProperty(ServiceClientFactoryProperties.DSC_DEFAULT_SOAP_ENDPOINT, "https://[server]:[port]");
   connectionProps.setProperty(ServiceClientFactoryProperties.DSC_TRANSPORT_PROTOCOL, ServiceC
   lientFactoryProperties.DSC_SOAP_PROTOCOL);
   connectionProps.setProperty(ServiceClientFactoryProperties.DSC_SERVER_TYPE, "JBoss");
   connectionProps.setProperty(ServiceClientFactoryProperties.DSC_CREDENTIAL_USERNAME, "administrator");
   connectionProps.setProperty(ServiceClientFactoryProperties.DSC_CREDENTIAL_PASSWORD, "password");
   //Create a ServiceClientFactory object
   ServiceClientFactory myFactory = ServiceClientFactory.createInstance(connectionProps);
   //Create a FormsServiceClient object
   FormsServiceClient formsClient = new FormsServiceClient(myFactory);
   //Set the parameter values for the renderPDFForm method
   String formName = "Applications/FormsApplication/1.0/FormsFolder/PO.xdp";
   //Cache the form
   PDFFormRenderSpec pdfFormRenderSpec = new PDFFormRenderSpec();
   pdfFormRenderSpec.setCacheEnabled(new Boolean(true));
   //Specify URI values that are required to render a form
   URLSpec uriValues = new URLSpec();
   uriValues.setApplicationWebRoot("https://[server]:[port]/FormsQS");
   uriValues.setContentRootURI("repository:///");
   uriValues.setTargetURL("https://[server]:[port]/FormsQS/HandleData");
   //Invoke the renderForm method
   FormsResult formOut = formsClient.renderPDFForm(
   formName, //formQuery
   formData, //inDataDoc
   pdfFormRenderSpec, //PDFFormRenderSpec
   uriValues, //urlSpec
   null //attachments
   );
   //Create a ServletOutputStream object
   ServletOutputStream oOutput = resp.getOutputStream();
   //Create a Document object that stores form data
   Document myData = formOut.getOutputContent();
   //Create an InputStream object
   InputStream inputStream = myData.getInputStream();
   //Write the data stream to the web browser
   byte[] data = new byte[4096];
   int bytesRead = 0;
   while ((bytesRead = inputStream.read(data)) > 0) {
    oOutput.write(data, 0, bytesRead);
   }
  } catch(Exception e) {
   System.out.println("The following exception occurred: " + e.getMessage());
  }
 }
}

Schnellstart (SOAP-Modus): Verarbeiten eines Formulars mit einem Berechnungsskript mithilfe der Java-API

Im folgenden Codebeispiel wird ein Formular verarbeitet, das ein Berechnungsskript enthält und die Ergebnisse zurück in den Client-Webbrowser schreibt. (Siehe Berechnen von Formulardaten.)

 /* 
     * This Java Quick Start uses the following JAR files 
     * 1. adobe-forms-client.jar 
     * 2. adobe-livecycle-client.jar 
     * 3. adobe-usermanager-client.jar 
    * 4. activation.jar (required for SOAP mode) 
    * 5. axis.jar (required for SOAP mode) 
    * 6. commons-codec-1.3.jar (required for SOAP mode) 
    * 7. commons-collections-3.2.jar  (required for SOAP mode) 
    * 8. commons-discovery.jar (required for SOAP mode) 
    * 9. commons-logging.jar (required for SOAP mode) 
    * 10. dom3-xml-apis-2.5.0.jar (required for SOAP mode) 
    * 11. jaxen-1.1-beta-9.jar (required for SOAP mode) 
    * 12. jaxrpc.jar (required for SOAP mode) 
    * 13. log4j.jar (required for SOAP mode) 
    * 14. mail.jar (required for SOAP mode) 
    * 15. saaj.jar (required for SOAP mode) 
    * 16. wsdl4j.jar (required for SOAP mode) 
    * 17. xalan.jar (required for SOAP mode) 
    * 18. xbean.jar (required for SOAP mode) 
    * 19. xercesImpl.jar (required for SOAP mode) 
    * 
     * (Because Forms quick starts are implemented as Java servlets, it is  
     * not necessary to include J2EE specific JAR files - the Java project 
     * that contains this quick start is exported as a WAR file which 
     * is deployed to the J2EE application server) 
     * 
     * These JAR files are located in the following path: 
     * <install directory>/sdk/client-libs/common 
     * 
     * For complete details about the location of these JAR files,  
     * see "Including AEM Forms library files" in Programming with AEM forms 
     */ 
 import java.io.IOException; 
 import javax.servlet.Servlet; 
 import javax.servlet.ServletException; 
 import javax.servlet.ServletOutputStream; 
 import javax.servlet.http.HttpServlet; 
 import javax.servlet.http.HttpServletRequest; 
 import javax.servlet.http.HttpServletResponse; 
 import com.adobe.livecycle.formsservice.client.*; 
 import java.util.*; 
 import java.io.InputStream; 
 import com.adobe.idp.Document; 
 import com.adobe.idp.dsc.clientsdk.ServiceClientFactory; 
 import com.adobe.idp.dsc.clientsdk.ServiceClientFactoryProperties; 
  
 public class CalculateData extends HttpServlet implements Servlet { 
  
     public void doGet(HttpServletRequest req, HttpServletResponse resp) 
         throws ServletException, IOException { 
             doPost(req,resp); 
     } 
  
      
     public void doPost(HttpServletRequest req, HttpServletResponse resp) 
         throws ServletException, IOException { 
              
         try{ 
             //Set connection properties required to invoke AEM Forms                                 
             Properties connectionProps = new Properties(); 
             connectionProps.setProperty(ServiceClientFactoryProperties.DSC_DEFAULT_SOAP_ENDPOINT, "https://[server]:[port]"); 
             connectionProps.setProperty(ServiceClientFactoryProperties.DSC_TRANSPORT_PROTOCOL,ServiceClientFactoryProperties.DSC_SOAP_PROTOCOL);           
             connectionProps.setProperty(ServiceClientFactoryProperties.DSC_SERVER_TYPE, "JBoss"); 
             connectionProps.setProperty(ServiceClientFactoryProperties.DSC_CREDENTIAL_USERNAME, "administrator"); 
             connectionProps.setProperty(ServiceClientFactoryProperties.DSC_CREDENTIAL_PASSWORD, "password"); 
              
             //Create a ServiceClientFactory object 
             ServiceClientFactory myFactory = ServiceClientFactory.createInstance(connectionProps); 
                  
             //Create a FormsServiceClient object 
             FormsServiceClient formsClient = new FormsServiceClient(myFactory);  
          
             //Get form data to pass to the processFormSubmission method 
             Document formData = new Document(req.getInputStream());  
  
             //Set run-time options 
             RenderOptionsSpec processSpec = new RenderOptionsSpec();  
             processSpec.setLocale("en_US"); 
                                    
             //Invoke the processFormSubmission method 
             FormsResult formOut = formsClient.processFormSubmission(formData,"CONTENT_TYPE=application/pdf&CONTENT_TYPE=application/vnd.adobe.xdp+xml","",processSpec); 
              
             //Get the processing state 
             short processState = formOut.getAction(); 
              
             //Determine if the form data is calculated 
             if (processState == 1)  
             { 
                  
                 //Write the data back to to the client web browser 
                 ServletOutputStream oOutput = resp.getOutputStream(); 
                 Document calData = formOut.getOutputContent(); 
                  
                 //Create an InputStream object 
                 InputStream inputStream = calData.getInputStream(); 
          
                 //Write the data stream to the web browser 
                 byte[] data = new byte[4096]; 
                 int bytesRead = 0; 
                 while ((bytesRead = inputStream.read(data)) > 0) 
                 { 
                     oOutput.write(data, 0, bytesRead); 
                 } 
              } 
             } 
         catch (Exception e) { 
              System.out.println("The following exception occurred: "+e.getMessage()); 
         } 
     } 
 }

Schnellstart (SOAP-Modus): Leistungsoptimierung mit der Java-API

Im folgenden Codebeispiel wird die Leistung durch Festlegen der Optionen für Zwischenspeicherung, Standalone und linearisierte Bereitstellung optimiert. Eine linearisierte Datei ist für die Bereitstellung im Internet optimiert. (Siehe Leistungsoptimierung des Forms-Dienstes.)

 /* 
     * This Java Quick Start uses the following JAR files 
     * 1. adobe-forms-client.jar 
     * 2. adobe-livecycle-client.jar 
     * 3. adobe-usermanager-client.jar 
    * 4. activation.jar (required for SOAP mode) 
    * 5. axis.jar (required for SOAP mode) 
    * 6. commons-codec-1.3.jar (required for SOAP mode) 
    * 7. commons-collections-3.2.jar  (required for SOAP mode) 
    * 8. commons-discovery.jar (required for SOAP mode) 
    * 9. commons-logging.jar (required for SOAP mode) 
    * 10. dom3-xml-apis-2.5.0.jar (required for SOAP mode) 
    * 11. jaxen-1.1-beta-9.jar (required for SOAP mode) 
    * 12. jaxrpc.jar (required for SOAP mode) 
    * 13. log4j.jar (required for SOAP mode) 
    * 14. mail.jar (required for SOAP mode) 
    * 15. saaj.jar (required for SOAP mode) 
    * 16. wsdl4j.jar (required for SOAP mode) 
    * 17. xalan.jar (required for SOAP mode) 
    * 18. xbean.jar (required for SOAP mode) 
    * 19. xercesImpl.jar (required for SOAP mode) 
    * 
     * (Because Forms quick starts are implemented as Java servlets, it is  
     * not necessary to include J2EE specific JAR files - the Java project 
     * that contains this quick start is exported as a WAR file which 
     * is deployed to the J2EE application server) 
     * 
     * These JAR files are located in the following path: 
     * <install directory>/sdk/client-libs/common 
     * 
     * For complete details about the location of these JAR files,  
     * see "Including AEM Forms library files" in Programming with AEM forms 
     */ 
 import java.io.IOException; 
 import javax.servlet.Servlet; 
 import javax.servlet.ServletException; 
 import javax.servlet.ServletOutputStream; 
 import javax.servlet.http.HttpServlet; 
 import javax.servlet.http.HttpServletRequest; 
 import javax.servlet.http.HttpServletResponse; 
 import com.adobe.livecycle.formsservice.client.*; 
 import java.util.*; 
 import java.io.InputStream; 
 import com.adobe.idp.Document; 
 import com.adobe.idp.dsc.clientsdk.ServiceClientFactory; 
 import com.adobe.idp.dsc.clientsdk.ServiceClientFactoryProperties; 
  
 public class RenderFormsPerformance extends HttpServlet implements Servlet { 
      
     public void doGet(HttpServletRequest req, HttpServletResponse resp) 
         throws ServletException, IOException { 
             doPost(req,resp);  
     } 
  
     public void doPost(HttpServletRequest req, HttpServletResponse resp) 
         throws ServletException, IOException { 
     try{ 
              
         //Set connection properties required to invoke AEM Forms                                 
         Properties connectionProps = new Properties(); 
         connectionProps.setProperty(ServiceClientFactoryProperties.DSC_DEFAULT_SOAP_ENDPOINT, "https://[server]:[port]"); 
         connectionProps.setProperty(ServiceClientFactoryProperties.DSC_TRANSPORT_PROTOCOL,ServiceClientFactoryProperties.DSC_SOAP_PROTOCOL);           
         connectionProps.setProperty(ServiceClientFactoryProperties.DSC_SERVER_TYPE, "JBoss"); 
         connectionProps.setProperty(ServiceClientFactoryProperties.DSC_CREDENTIAL_USERNAME, "administrator"); 
         connectionProps.setProperty(ServiceClientFactoryProperties.DSC_CREDENTIAL_PASSWORD, "password"); 
              
         //Create a ServiceClientFactory object 
         ServiceClientFactory myFactory = ServiceClientFactory.createInstance(connectionProps); 
                  
         //Create a FormsServiceClient object 
         FormsServiceClient formsClient = new FormsServiceClient(myFactory);  
          
         //Set the parameter values for the renderForm method 
         String formName = "Applications/FormsApplication/1.0/FormsFolder/Loan.xdp";  
         byte[]    cData = "".getBytes(); 
         Document oInputData = new Document(cData); 
                      
         //Set performance run-time options 
         PDFFormRenderSpec renderSpec = new PDFFormRenderSpec();  
         renderSpec.setCacheEnabled(new Boolean(true)); 
         renderSpec.setLinearizedPDF(true); 
                  
         //Specify URI values that are required to render a form 
         //design located in the AEM Forms Repository 
         URLSpec uriValues = new URLSpec();  
         uriValues.setApplicationWebRoot("https://[server]:[port]/FormsServiceClientApp"); 
         uriValues.setContentRootURI("repository:///"); 
         uriValues.setTargetURL("https://[server]:[port]/FormsServiceClientApp/HandleData"); 
                  
         //Invoke the renderPDFForm method and write the  
         //results to a client web browser 
         FormsResult formOut = formsClient.renderPDFForm( 
                     formName,       //formQuery 
                     oInputData,     //inDataDoc 
                     renderSpec,     //PDFFormRenderSpec 
                     uriValues,        //urlSpec 
                     null            //attachments 
                     ); 
          
         //Create a ServletOutputStream object 
         ServletOutputStream oOutput = resp.getOutputStream(); 
          
         //Create a Document object that stores form data 
         Document myData = formOut.getOutputContent(); 
          
         //Create an InputStream object 
         InputStream inputStream = myData.getInputStream(); 
          
         //Write the data stream to the web browser 
         byte[] data = new byte[4096]; 
         int bytesRead = 0; 
         while ((bytesRead = inputStream.read(data)) > 0) 
         { 
             oOutput.write(data, 0, bytesRead); 
         } 
          
         }catch (Exception e) { 
              System.out.println("The following exception occurred: "+e.getMessage()); 
       } 
     } 
 }

Schnellstart (SOAP-Modus): Rendern nach Wert mit der Java-API

Mit dem folgenden Java-Schnellstart wird ein interaktives PDF-Formular wiedergegeben, das auf einem Formularentwurf mit dem Namen Loan.xdp nach Wert basiert. Beachten Sie, dass der Formularentwurf zum Ausfüllen eines com.adobe.idp.Document-Objekts mit dem Namen "inputXDP*"verwendet wird. (Siehe Rendern von Forms nach Wert.)

 /* 
     * This Java Quick Start uses the following JAR files 
     * 1. adobe-forms-client.jar 
     * 2. adobe-livecycle-client.jar 
     * 3. adobe-usermanager-client.jar 
    * 4. activation.jar (required for SOAP mode) 
    * 5. axis.jar (required for SOAP mode) 
    * 6. commons-codec-1.3.jar (required for SOAP mode) 
    * 7. commons-collections-3.2.jar  (required for SOAP mode) 
    * 8. commons-discovery.jar (required for SOAP mode) 
    * 9. commons-logging.jar (required for SOAP mode) 
    * 10. dom3-xml-apis-2.5.0.jar (required for SOAP mode) 
    * 11. jaxen-1.1-beta-9.jar (required for SOAP mode) 
    * 12. jaxrpc.jar (required for SOAP mode) 
    * 13. log4j.jar (required for SOAP mode) 
    * 14. mail.jar (required for SOAP mode) 
    * 15. saaj.jar (required for SOAP mode) 
    * 16. wsdl4j.jar (required for SOAP mode) 
    * 17. xalan.jar (required for SOAP mode) 
    * 18. xbean.jar (required for SOAP mode) 
    * 19. xercesImpl.jar (required for SOAP mode) 
    * 
     * (Because Forms quick starts are implemented as Java servlets, it is  
     * not necessary to include J2EE specific JAR files - the Java project 
     * that contains this quick start is exported as a WAR file which 
     * is deployed to the J2EE application server) 
     * 
     * These JAR files are located in the following path: 
     * <install directory>/sdk/client-libs/common 
     * 
     * For complete details about the location of these JAR files,  
     * see "Including AEM Forms library files" in Programming with AEM forms. 
     */ 
 import java.io.FileInputStream; 
 import java.io.IOException; 
 import javax.servlet.Servlet; 
 import javax.servlet.ServletException; 
 import javax.servlet.ServletOutputStream; 
  
 import javax.servlet.http.HttpServlet; 
 import javax.servlet.http.HttpServletRequest; 
 import javax.servlet.http.HttpServletResponse; 
 import com.adobe.livecycle.formsservice.client.*; 
 import java.util.*; 
 import java.io.InputStream; 
  
 import com.adobe.idp.Document; 
 import com.adobe.idp.dsc.clientsdk.ServiceClientFactory; 
 import com.adobe.idp.dsc.clientsdk.ServiceClientFactoryProperties; 
  
 public class RenderByValue extends HttpServlet implements Servlet { 
  
     public void doGet(HttpServletRequest req, HttpServletResponse resp) 
         throws ServletException, IOException { 
             doPost(req,resp); 
     } 
      
     public void doPost(HttpServletRequest req, HttpServletResponse resp) 
         throws ServletException, IOException { 
         try{ 
             //Set connection properties required to invoke AEM Forms                                 
             Properties connectionProps = new Properties(); 
             connectionProps.setProperty(ServiceClientFactoryProperties.DSC_DEFAULT_SOAP_ENDPOINT, "https://[server]:[port]"); 
             connectionProps.setProperty(ServiceClientFactoryProperties.DSC_TRANSPORT_PROTOCOL,ServiceClientFactoryProperties.DSC_SOAP_PROTOCOL);           
             connectionProps.setProperty(ServiceClientFactoryProperties.DSC_SERVER_TYPE, "JBoss"); 
             connectionProps.setProperty(ServiceClientFactoryProperties.DSC_CREDENTIAL_USERNAME, "administrator"); 
             connectionProps.setProperty(ServiceClientFactoryProperties.DSC_CREDENTIAL_PASSWORD, "password"); 
              
             //Create a ServiceClientFactory object 
             ServiceClientFactory myFactory = ServiceClientFactory.createInstance(connectionProps); 
                  
             //Create a FormsServiceClient object 
             FormsServiceClient formsClient = new FormsServiceClient(myFactory);  
          
             //Retrieve the form design 
             FileInputStream fileInputStream = new FileInputStream("C:\\Adobe\Loan.xdp");  
             Document inputXDP = new Document(fileInputStream); 
          
             //Specify URI values that are required to render a form 
             URLSpec uriValues = new URLSpec();  
             uriValues.setApplicationWebRoot("https://[server]:[port]/FormsQS"); 
             uriValues.setTargetURL("https://[server]:[port]/FormsQS/HandleData"); 
                      
             //Invoke the renderPDFForm method and pass the  
             //form design by value 
             FormsResult formOut = formsClient.renderPDFForm( 
                         "",                     //formQuery 
                         inputXDP,                 //inDataDoc 
                         new PDFFormRenderSpec(), //PDFFormRenderSpec 
                         uriValues,                //urlSpec 
                         null                    //attachments 
                         ); 
          
             //Create a Document object that stores form data 
             Document myData = formOut.getOutputContent(); 
          
             //Get the content type of the response and 
             //set the HttpServletResponse object?s content type 
             String contentType = myData.getContentType();  
             resp.setContentType(contentType); 
          
             //Create a ServletOutputStream object 
             ServletOutputStream oOutput = resp.getOutputStream(); 
          
             //Create an InputStream object 
             InputStream inputStream = myData.getInputStream(); 
          
             //Write the data stream to the web browser 
             byte[] data = new byte[4096]; 
             int bytesRead = 0; 
             while ((bytesRead = inputStream.read(data)) > 0) 
             { 
                 oOutput.write(data, 0, bytesRead); 
             } 
          
             }catch (Exception e) { 
                  e.printStackTrace(); 
               } 
         } 
 }

Schnellstart (SOAP-Modus): Übergeben von Dokumenten an den Forms-Dienst mithilfe der Java-API

Mit dem folgenden Java-Schnellstart wird die Datei "Loan.xdp"aus Content Services (nicht mehr unterstützt) abgerufen. Diese XDP-Datei befindet sich im Bereich /Company Home/Form Designs. Die XDP-Datei wird in einer com.adobe.idp.Document-Instanz zurückgegeben. Die com.adobe.idp.Document-Instanz wird an den Forms-Dienst übergeben. Das interaktive Formular wird in einen Client-Webbrowser geschrieben. (Siehe Übergeben von Dokumenten an den Forms-Dienst.)

 /* 
     * This Java Quick Start uses the following JAR files 
     * 1. adobe-forms-client.jar 
     * 2. adobe-contentservices-client.jar 
     * 3. adobe-livecycle-client.jar 
     * 4. adobe-usermanager-client.jar 
     * 
     * (Because Forms quick starts are implemented as Java servlets, it is  
     * not necessary to include J2EE specific JAR files - the Java project 
     * that contains this quick start is exported as a WAR file which 
     * is deployed to the J2EE application server) 
     * 
     * These JAR files are located in the following path: 
     * <install directory>/sdk/client-libs/common 
     * 
     * For complete details about the location of these JAR files,  
     * see "Including AEM Forms library files" in Programming with AEM forms. 
     */ 
 import java.io.IOException; 
 import javax.servlet.Servlet; 
 import javax.servlet.ServletException; 
 import javax.servlet.ServletOutputStream; 
 import javax.servlet.http.HttpServlet; 
 import javax.servlet.http.HttpServletRequest; 
 import javax.servlet.http.HttpServletResponse; 
  
 import com.adobe.livecycle.contentservices.client.CRCResult; 
 import com.adobe.livecycle.contentservices.client.impl.DocumentManagementServiceClientImpl; 
 import com.adobe.livecycle.formsservice.client.*; 
  
 import java.util.*; 
 import java.io.InputStream; 
  
 import com.adobe.idp.Document; 
 import com.adobe.idp.dsc.clientsdk.ServiceClientFactory; 
 import com.adobe.idp.dsc.clientsdk.ServiceClientFactoryProperties; 
  
 public class RenderFormsFromContentServices extends HttpServlet implements Servlet { 
  
     public void doGet(HttpServletRequest req, HttpServletResponse resp) 
         throws ServletException, IOException { 
             doPost(req,resp); 
     } 
      
     public void doPost(HttpServletRequest req, HttpServletResponse resp) 
         throws ServletException, IOException { 
         try{ 
             //Set connection properties required to invoke AEM Forms 
             Properties connectionProps = new Properties(); 
             connectionProps.setProperty(ServiceClientFactoryProperties.DSC_DEFAULT_SOAP_ENDPOINT, "https://[server]:[port]"); 
             connectionProps.setProperty(ServiceClientFactoryProperties.DSC_TRANSPORT_PROTOCOL,ServiceClientFactoryProperties.DSC_SOAP_PROTOCOL);           
             connectionProps.setProperty(ServiceClientFactoryProperties.DSC_SERVER_TYPE, "JBoss"); 
             connectionProps.setProperty(ServiceClientFactoryProperties.DSC_CREDENTIAL_USERNAME, "administrator"); 
             connectionProps.setProperty(ServiceClientFactoryProperties.DSC_CREDENTIAL_PASSWORD, "password"); 
              
             //Create a ServiceClientFactory object 
             ServiceClientFactory myFactory = ServiceClientFactory.createInstance(connectionProps); 
                  
             //Create a FormsServiceClient object 
             FormsServiceClient formsClient = new FormsServiceClient(myFactory);  
                          
             //Create an empty Document that represents form data 
             byte[]    cData = "".getBytes(); 
             Document oInputData = new Document(cData); 
              
             //Get the form design from Content Services (deprecated) 
             Document formDesign =  GetFormDesign(myFactory); 
                                      
             //Cache the PDF form 
             PDFFormRenderSpec pdfFormRenderSpec = new PDFFormRenderSpec(); 
             pdfFormRenderSpec.setCacheEnabled(new Boolean(true)); 
                      
             //Invoke the renderPDFForm2 and pass to the  
             //Document that contains the form design 
             FormsResult formOut = formsClient.renderPDFForm2( 
                     formDesign,               
                     oInputData,              
                     pdfFormRenderSpec,       
                     null,                 
                     null             
                     ); 
          
             //Create a Document object that stores form data 
             Document myData = formOut.getOutputContent(); 
          
             //Get the content type of the response and 
             //set the HttpServletResponse object?s content type 
             String contentType = myData.getContentType();  
             resp.setContentType(contentType); 
          
             //Create a ServletOutputStream object 
             ServletOutputStream oOutput = resp.getOutputStream(); 
          
             //Create an InputStream object 
             InputStream inputStream = myData.getInputStream(); 
          
             //Write the data stream to the web browser 
             byte[] data = new byte[4096]; 
             int bytesRead = 0; 
             while ((bytesRead = inputStream.read(data)) > 0) 
             { 
                 oOutput.write(data, 0, bytesRead); 
             } 
          
             }catch (Exception e) { 
                  e.printStackTrace(); 
               } 
         } 
          
     //Retrieve the form design from Content Services (deprecated) 
     private Document GetFormDesign(ServiceClientFactory myFactory) 
     { 
         try{ 
              
         //Create a DocumentManagementServiceClientImpl object 
         DocumentManagementServiceClientImpl    docManager = new DocumentManagementServiceClientImpl(myFactory);  
              
         //Specify the name of the store and the content to retrieve 
            String storeName = "SpacesStore"; 
            String nodeName  = "/Company Home/Form Designs/Loan.xdp"; 
  
            //Retrieve /Company Home/Form Designs/Loan.xdp 
            CRCResult content = docManager.retrieveContent( 
                      storeName, 
                      nodeName, 
                      ""); 
      
            //Return the Document instance 
             Document doc =content.getDocument();  
             return  doc; 
          } 
              
         catch(Exception e) 
         { 
             e.printStackTrace(); 
         } 
         return null;  
     } 
      
 } 
 

Auf dieser Seite