Início rápido da API Java (SOAP) do Registro do Endpoint endpoint-registry-java-api-quickstart-soap

CAUTION
AEM 6.4 chegou ao fim do suporte estendido e esta documentação não é mais atualizada. Para obter mais detalhes, consulte nossa períodos de assistência técnica. Encontre as versões compatíveis here.

O Java API Quick Start (SOAP) está disponível para o Endpoint Registry.

Início rápido: Adicionar um ponto de extremidade EJB usando a API Java

Início rápido: Adicionar um terminal SOAP usando a API Java

Início rápido: Adicionar um endpoint de pasta assistida usando a API Java

Início rápido: Adicionar um endpoint de email usando a API do Java

Início rápido: Adicionar um terminal Remoting usando a API Java

Início rápido: Adicionar um ponto de extremidade do TaskManager usando a API do Java

Início rápido: Modificação de um terminal usando a API do Java

Início rápido: Remoção de um terminal usando a API do Java

Início rápido: Recuperação de informações do conector do ponto de extremidade usando a API Java

As operações do AEM Forms podem ser executadas usando a API altamente digitada do AEM Forms e o modo de conexão deve ser definido como SOAP.

NOTE
O início rápido localizado em Programação com formulários de AEM é baseado na Forms se você estiver usando outro sistema operacional, como o Unix, substitua os caminhos específicos das janelas por caminhos suportados pelo sistema operacional aplicável. Da mesma forma, se estiver usando outro servidor de aplicativos J2EE, certifique-se de especificar propriedades de conexão válidas. Consulte Configuração das propriedades de conexão.
NOTE
Não é possível trabalhar com endpoints usando um serviço da Web.

Início rápido: Adicionar um ponto de extremidade EJB usando a API Java quickstart-adding-an-ejb-endpoint-using-the-java-api

O seguinte exemplo de código Java adiciona um ponto de extremidade EJB a um serviço chamado MyApplication/EncryptDocument. (Consulte Adicionar Endpoints EJB.)

 /*
     * This Java Quick Start uses the following JAR files
     * 1. adobe-livecycle-client.jar
     * 2. adobe-usermanager-client.jar
     * 3. activation.jar (required for SOAP mode)
     * 4. axis.jar (required for SOAP mode)
     * 5. commons-codec-1.3.jar (required for SOAP mode)
     * 6. commons-collections-3.2.jar  (required for SOAP mode)
     * 7. commons-discovery.jar (required for SOAP mode)
     * 8. commons-logging.jar (required for SOAP mode)
     * 9. dom3-xml-apis-2.5.0.jar (required for SOAP mode)
     * 10. jaxen-1.1-beta-9.jar (required for SOAP mode)
     * 11. jaxrpc.jar (required for SOAP mode)
     * 12. log4j.jar (required for SOAP mode)
     * 13. mail.jar (required for SOAP mode)
     * 14. saaj.jar (required for SOAP mode)
     * 15. wsdl4j.jar (required for SOAP mode)
     * 16. xalan.jar (required for SOAP mode)
     * 17. xbean.jar (required for SOAP mode)
     * 18. xercesImpl.jar (required for SOAP mode)
     *
     * The JBoss files must be kept in the jboss\client folder. You can copy the client folder to
     * your local development environment and then include the 3 JBoss JAR files in your class path
     *
     * These JAR files are located in the following path:
     * <install directory>/sdk/client-libs/common
     *
     *
     * <install directory>/jboss/bin/client
     *
     * If you want to invoke a remote forms server instance and there is a
     * firewall between the client application and the server, then it is
     * recommended that you use the SOAP mode. When using the SOAP mode,
     * you have to include additional JAR files located in the following
     * path
     * <install directory>/sdk/client-libs/thirdparty
     *
     * For information about the SOAP
     * mode and the additional JAR files that need to be included,
     * see "Setting connection properties" in Programming
     * with AEM Forms
     *
     * For complete details about the location of the AEM Forms JAR files,
     * see "Including AEM Forms Java library files" in Programming
     * with AEM Forms
     */
 import java.util.Properties;
 import com.adobe.idp.dsc.clientsdk.ServiceClientFactory;
 import com.adobe.idp.dsc.clientsdk.ServiceClientFactoryProperties;
 import com.adobe.idp.dsc.registry.endpoint.CreateEndpointInfo;
 import com.adobe.idp.dsc.registry.endpoint.client.EndpointRegistryClient;
 import com.adobe.idp.dsc.registry.infomodel.Endpoint;

 public class AddEJBEndPoint {

     public static void main(String[] args) {

     try{
         //Set connection properties    required to invoke AEM Forms
         Properties ConnectionProps = new Properties();

         ConnectionProps.setProperty(ServiceClientFactoryProperties.DSC_DEFAULT_SOAP_ENDPOINT, "https://[server]:[port]");
         ConnectionProps.setProperty(ServiceClientFactoryProperties.DSC_TRANSPORT_PROTOCOL,ServiceClientFactoryProperties.DSC_SOAP_PROTOCOL);
         ConnectionProps.setProperty(ServiceClientFactoryProperties.DSC_SERVER_TYPE, "JBoss");
         ConnectionProps.setProperty(ServiceClientFactoryProperties.DSC_CREDENTIAL_USERNAME, "administrator");
         ConnectionProps.setProperty(ServiceClientFactoryProperties.DSC_CREDENTIAL_PASSWORD, "password");

         //Create a ServiceClientFactory object
         ServiceClientFactory myFactory = ServiceClientFactory.createInstance(ConnectionProps);

         //Create an EndpointRegistryClient object
         EndpointRegistryClient endPointClient = new EndpointRegistryClient(myFactory);

         //Create an SOAP endpoint for the MyApplication/EncryptDocument process
         CreateEndpointInfo e = new CreateEndpointInfo();
         e.setConnectorId("EJB");
         e.setDescription("EJB endpoint for the MyApplication/EncryptDocument proces");
         e.setName("MyApplication/EncryptDocument");
         e.setServiceId("MyApplication/EncryptDocument");
         e.setOperationName("*");
         Endpoint endPoint = endPointClient.createEndpoint(e);

         //Enable the SOAP Endpoint
         endPointClient.enable(endPoint);

     }catch (Exception e) {
          e.printStackTrace();
         }

     }
 }

Início rápido: Adicionar um terminal SOAP usando a API Java quickstart-adding-a-soap-endpoint-using-the-java-api

O seguinte exemplo de código Java adiciona um ponto de extremidade SOAP a um serviço chamado MyApplication/EncryptDocument. (Consulte Adicionar endpoints SOAP.)

 /*
     * This Java Quick Start uses the following JAR files
     * 1. adobe-livecycle-client.jar
     * 2. adobe-usermanager-client.jar
     * 3. activation.jar (required for SOAP mode)
     * 4. axis.jar (required for SOAP mode)
     * 5. commons-codec-1.3.jar (required for SOAP mode)
     * 6. commons-collections-3.2.jar  (required for SOAP mode)
     * 7. commons-discovery.jar (required for SOAP mode)
     * 8. commons-logging.jar (required for SOAP mode)
     * 9. dom3-xml-apis-2.5.0.jar (required for SOAP mode)
     * 10. jaxen-1.1-beta-9.jar (required for SOAP mode)
     * 11. jaxrpc.jar (required for SOAP mode)
     * 12. log4j.jar (required for SOAP mode)
     * 13. mail.jar (required for SOAP mode)
     * 14. saaj.jar (required for SOAP mode)
     * 15. wsdl4j.jar (required for SOAP mode)
     * 16. xalan.jar (required for SOAP mode)
     * 17. xbean.jar (required for SOAP mode)
     * 18. xercesImpl.jar (required for SOAP mode)
     *
     * The JBoss files must be kept in the jboss\client folder. You can copy the client folder to
     * your local development environment and then include the 3 JBoss JAR files in your class path
     *
     * These JAR files are located in the following path:
     * <install directory>/sdk/client-libs/common
     *
     *
     * <install directory>/jboss/bin/client
     *
     * If you want to invoke a remote forms server instance and there is a
     * firewall between the client application and the server, then it is
     * recommended that you use the SOAP mode. When using the SOAP mode,
     * you have to include additional JAR files located in the following
     * path
     * <install directory>/sdk/client-libs/thirdparty
     *
     * For information about the SOAP
     * mode and the additional JAR files that need to be included,
     * see "Setting connection properties" in Programming
     * with AEM Forms
     *
     * For complete details about the location of the AEM Forms JAR files,
     * see "Including AEM Forms Java library files" in Programming
     * with AEM Forms
     */
 import java.util.Properties;
 import com.adobe.idp.dsc.clientsdk.ServiceClientFactory;
 import com.adobe.idp.dsc.clientsdk.ServiceClientFactoryProperties;
 import com.adobe.idp.dsc.registry.endpoint.CreateEndpointInfo;
 import com.adobe.idp.dsc.registry.endpoint.client.EndpointRegistryClient;
 import com.adobe.idp.dsc.registry.infomodel.Endpoint;


 public class AddSoapEndPoint {

     public static void main(String[] args) {

     try{
         //Set connection properties    required to invoke AEM Forms
         Properties ConnectionProps = new Properties();
         ConnectionProps.setProperty(ServiceClientFactoryProperties.DSC_DEFAULT_SOAP_ENDPOINT, "https://[server]:[port]");
         ConnectionProps.setProperty(ServiceClientFactoryProperties.DSC_TRANSPORT_PROTOCOL,ServiceClientFactoryProperties.DSC_SOAP_PROTOCOL);
         ConnectionProps.setProperty(ServiceClientFactoryProperties.DSC_SERVER_TYPE, "JBoss");
         ConnectionProps.setProperty(ServiceClientFactoryProperties.DSC_CREDENTIAL_USERNAME, "administrator");
         ConnectionProps.setProperty(ServiceClientFactoryProperties.DSC_CREDENTIAL_PASSWORD, "password");

         //Create a ServiceClientFactory object
         ServiceClientFactory myFactory = ServiceClientFactory.createInstance(ConnectionProps);

         //Create an EndpointRegistryClient object
         EndpointRegistryClient endPointClient = new EndpointRegistryClient(myFactory);

         //Create a SOAP Endpoint for the MortgageLoan - Prebuilt process
         CreateEndpointInfo e = new CreateEndpointInfo();
         e.setConnectorId("SOAP");
         e.setDescription("SOAP endpoint for the MyApplication/EncryptDocument proces");
         e.setName("MyApplication/EncryptDocument");
         e.setServiceId("MyApplication/EncryptDocument");
         e.setOperationName("*");
         Endpoint endPoint = endPointClient.createEndpoint(e);

         //Enable the SOAP Endpoint
         endPointClient.enable(endPoint);


     }catch (Exception e) {
          e.printStackTrace();
         }

     }
 }

Início rápido: Adicionar um endpoint de pasta assistida usando a API Java quickstart-adding-a-watched-folder-endpoint-using-the-java-api

O seguinte exemplo de código Java adiciona um endpoint de Pasta assistida a um serviço chamado MyApplication/EncryptDocument. (Consulte Adicionar pontos de extremidade de pasta monitorada.)

NOTE
Você deve incluir o arquivo WatchedFolderEndpointConfigConstants.java em seu projeto para compilar e executar o seguinte início rápido. (Consulte Arquivo constante de valores de configuração de pasta monitorados.)
 /*
     * This Java Quick Start uses the following JAR files
     * 1. adobe-livecycle-client.jar
     * 2. adobe-usermanager-client.jar
     * 3. activation.jar (required for SOAP mode)
     * 4. axis.jar (required for SOAP mode)
     * 5. commons-codec-1.3.jar (required for SOAP mode)
     * 6. commons-collections-3.2.jar  (required for SOAP mode)
     * 7. commons-discovery.jar (required for SOAP mode)
     * 8. commons-logging.jar (required for SOAP mode)
     * 9. dom3-xml-apis-2.5.0.jar (required for SOAP mode)
     * 10. jaxen-1.1-beta-9.jar (required for SOAP mode)
     * 11. jaxrpc.jar (required for SOAP mode)
     * 12. log4j.jar (required for SOAP mode)
     * 13. mail.jar (required for SOAP mode)
     * 14. saaj.jar (required for SOAP mode)
     * 15. wsdl4j.jar (required for SOAP mode)
     * 16. xalan.jar (required for SOAP mode)
     * 17. xbean.jar (required for SOAP mode)
     * 18. xercesImpl.jar (required for SOAP mode)
     *
     * The JBoss files must be kept in the jboss\client folder. You can copy the client folder to
     * your local development environment and then include the 3 JBoss JAR files in your class path
     *
     * These JAR files are located in the following path:
     * <install directory>/sdk/client-libs/common
     *
     *
     * <install directory>/jboss/bin/client
     *
     * If you want to invoke a remote forms server instance and there is a
     * firewall between the client application and the server, then it is
     * recommended that you use the SOAP mode. When using the SOAP mode,
     * you have to include additional JAR files located in the following
     * path
     * <install directory>/sdk/client-libs/thirdparty
     *
     * For information about the SOAP
     * mode and the additional JAR files that need to be included,
     * see "Setting connection properties" in Programming
     * with AEM Forms
     *
     * For complete details about the location of the AEM Forms JAR files,
     * see "Including AEM Forms Java library files" in Programming
     * with AEM Forms
     */
 import java.util.Properties;
 import com.adobe.idp.dsc.clientsdk.ServiceClientFactory;
 import com.adobe.idp.dsc.clientsdk.ServiceClientFactoryProperties;
 import com.adobe.idp.dsc.registry.endpoint.CreateEndpointInfo;
 import com.adobe.idp.dsc.registry.endpoint.client.EndpointRegistryClient;
 import com.adobe.idp.dsc.registry.infomodel.Endpoint;

 public class AddWatchFolderEndPoint {

     public static void main(String[] args) {

     try{
         //Set connection properties    required to invoke AEM Forms
         Properties ConnectionProps = new Properties();
         ConnectionProps.setProperty(ServiceClientFactoryProperties.DSC_DEFAULT_SOAP_ENDPOINT, "https://[server]:[port]");
         ConnectionProps.setProperty(ServiceClientFactoryProperties.DSC_TRANSPORT_PROTOCOL,ServiceClientFactoryProperties.DSC_SOAP_PROTOCOL);
         ConnectionProps.setProperty(ServiceClientFactoryProperties.DSC_SERVER_TYPE, "JBoss");
         ConnectionProps.setProperty(ServiceClientFactoryProperties.DSC_CREDENTIAL_USERNAME, "administrator");
         ConnectionProps.setProperty(ServiceClientFactoryProperties.DSC_CREDENTIAL_PASSWORD, "password");

         //Create a ServiceClientFactory object
         ServiceClientFactory myFactory = ServiceClientFactory.createInstance(ConnectionProps);

         //Create an EndpointRegistryClient object
         EndpointRegistryClient endPointClient = new EndpointRegistryClient(myFactory);

         //Create a Watched Folder endpoint for the MyApplication/EncryptDocument process
         CreateEndpointInfo e = new CreateEndpointInfo();
         e.setConnectorId("WatchedFolder");
         e.setDescription("WatchedFolder endpoint for the EncryptDocument process");
         e.setName("MyApplication/EncryptDocument");
         e.setServiceId("MyApplication/EncryptDocument");
         e.setOperationName("invoke");

         //Set configuration values for a Watched Folder EndPoint
         e.setConfigParameterAsText(WatchedFolderEndpointConfigConstants.PROPERTY_FILEPROVIDER_URL,"C:\\EncryptFolder");
         e.setConfigParameterAsText(WatchedFolderEndpointConfigConstants.PROPERTY_PROPERTY_ASYNCHRONOUS,"true");
         e.setConfigParameterAsText(WatchedFolderEndpointConfigConstants.PROPERTY_PURGE_DURATION,"-1");
         e.setConfigParameterAsText(WatchedFolderEndpointConfigConstants.PROPERTY_REPEAT_INTERVAL,"5");
         e.setConfigParameterAsText(WatchedFolderEndpointConfigConstants.PROPERTY_REPEAT_COUNT,"-1");
         e.setConfigParameterAsText(WatchedFolderEndpointConfigConstants.PROPERTY_THROTTLE,"false");
         e.setConfigParameterAsText(WatchedFolderEndpointConfigConstants.PROPERTY_USERNAMER,"SuperAdmin");
         e.setConfigParameterAsText(WatchedFolderEndpointConfigConstants.PROPERTY_DOMAINNAME,"DefaultDom");
         e.setConfigParameterAsText(WatchedFolderEndpointConfigConstants.PROPERTY_FILEPROVIDER_BATCH_SIZE,"2");
         e.setConfigParameterAsText(WatchedFolderEndpointConfigConstants.PROPERTY_FILEPROVIDER_WAIT_TIME,"0");
         e.setConfigParameterAsText(WatchedFolderEndpointConfigConstants.PROPERTY_EXCLUDE_FILE_PATTERN,".txt");
         e.setConfigParameterAsText(WatchedFolderEndpointConfigConstants.PROPERTY_INCLUDE_FILE_PATTERN,"*");
         e.setConfigParameterAsText(WatchedFolderEndpointConfigConstants.PROPERTY_FILEPROVIDER_RESULT_FOLDER_NAME,"result/%Y/%M/%D/");
         e.setConfigParameterAsText(WatchedFolderEndpointConfigConstants.PROPERTY_FILEPROVIDER_PRESERVE_FOLDER_NAME,"preserve/%Y/%M/%D/");
         e.setConfigParameterAsText(WatchedFolderEndpointConfigConstants.PROPERTY_FILEPROVIDER_FAILURE_FOLDER_NAME,"failure/%Y/%M/%D/");
         e.setConfigParameterAsText(WatchedFolderEndpointConfigConstants.PROPERTY_FILEPROVIDER_PRESERVE_ON_FAILURE,"true");
         e.setConfigParameterAsText(WatchedFolderEndpointConfigConstants.PROPERTY_FILEPROVIDER_OVERWRITE_DUPLICATE_FILENAME,"false");

         //Define input parameter values
         e.setInputParameterMapping("inDoc",
                 "com.adobe.idp.Document",
                 "variable",
                 "*.pdf");

         //Define the output parameter values
         e.setOutputParameterMapping("outDoc",
                 "com.adobe.idp.Document",
                 "%F.pdf");

         //Create the Watched Folder Endpoint
         Endpoint endPoint = endPointClient.createEndpoint(e);

         //Enable the Endpoint
         endPointClient.enable(endPoint);


     }catch (Exception e) {
          e.printStackTrace();
         }

     }
 }

Início rápido: Adicionar um endpoint de email usando a API do Java quickstart-adding-an-email-endpoint-using-the-java-api

O seguinte exemplo de código Java adiciona um ponto de extremidade de email a um serviço chamado MyApplication/EncryptDocument t. (Consulte Adicionar pontos de extremidade de email.)

NOTE
Você deve incluir o arquivo EmailEndpointConfigConstants.java em seu projeto para compilar e executar o seguinte início rápido. (Consulte Arquivo constante de valores de configuração de email.)
 /*
     * This Java Quick Start uses the following JAR files
     * 1. adobe-livecycle-client.jar
     * 2. adobe-usermanager-client.jar
     * 3. activation.jar (required for SOAP mode)
     * 4. axis.jar (required for SOAP mode)
     * 5. commons-codec-1.3.jar (required for SOAP mode)
     * 6. commons-collections-3.2.jar  (required for SOAP mode)
     * 7. commons-discovery.jar (required for SOAP mode)
     * 8. commons-logging.jar (required for SOAP mode)
     * 9. dom3-xml-apis-2.5.0.jar (required for SOAP mode)
     * 10. jaxen-1.1-beta-9.jar (required for SOAP mode)
     * 11. jaxrpc.jar (required for SOAP mode)
     * 12. log4j.jar (required for SOAP mode)
     * 13. mail.jar (required for SOAP mode)
     * 14. saaj.jar (required for SOAP mode)
     * 15. wsdl4j.jar (required for SOAP mode)
     * 16. xalan.jar (required for SOAP mode)
     * 17. xbean.jar (required for SOAP mode)
     * 18. xercesImpl.jar (required for SOAP mode)
     *
     * The JBoss files must be kept in the jboss\client folder. You can copy the client folder to
     * your local development environment and then include the 3 JBoss JAR files in your class path
     *
     * These JAR files are located in the following path:
     * <install directory>/sdk/client-libs/common
     *
     *
     * <install directory>/jboss/bin/client
     *
     * If you want to invoke a remote forms server instance and there is a
     * firewall between the client application and the server, then it is
     * recommended that you use the SOAP mode. When using the SOAP mode,
     * you have to include additional JAR files located in the following
     * path
     * <install directory>/sdk/client-libs/thirdparty
     *
     * For information about the SOAP
     * mode and the additional JAR files that need to be included,
     * see "Setting connection properties" in Programming
     * with AEM Forms
     *
     * For complete details about the location of the AEM Forms JAR files,
     * see "Including AEM Forms Java library files" in Programming
     * with AEM Forms
     */
 import java.util.Properties;
 import com.adobe.idp.dsc.clientsdk.ServiceClientFactory;
 import com.adobe.idp.dsc.clientsdk.ServiceClientFactoryProperties;
 import com.adobe.idp.dsc.registry.endpoint.CreateEndpointInfo;
 import com.adobe.idp.dsc.registry.endpoint.client.EndpointRegistryClient;
 import com.adobe.idp.dsc.registry.infomodel.Endpoint;

 public class AddEmailEndPoint {

     public static void main(String[] args) {

     try{
         //Set connection properties    required to invoke AEM Forms
         Properties ConnectionProps = new Properties();
         ConnectionProps.setProperty(ServiceClientFactoryProperties.DSC_DEFAULT_SOAP_ENDPOINT, "https://[server]:[port]");
         ConnectionProps.setProperty(ServiceClientFactoryProperties.DSC_TRANSPORT_PROTOCOL,ServiceClientFactoryProperties.DSC_SOAP_PROTOCOL);
         ConnectionProps.setProperty(ServiceClientFactoryProperties.DSC_SERVER_TYPE, "JBoss");
         ConnectionProps.setProperty(ServiceClientFactoryProperties.DSC_CREDENTIAL_USERNAME, "administrator");
         ConnectionProps.setProperty(ServiceClientFactoryProperties.DSC_CREDENTIAL_PASSWORD, "password");

         //Create a ServiceClientFactory object
         ServiceClientFactory myFactory = ServiceClientFactory.createInstance(ConnectionProps);

         //Create an EndpointRegistryClient object
         EndpointRegistryClient endPointClient = new EndpointRegistryClient(myFactory);

         //Create a new Email endpoint for the MyApplication/EncryptDocument process
         CreateEndpointInfo e = new CreateEndpointInfo();
         e.setConnectorId("Email");
         e.setDescription("Email endpoint for the MyApplication/EncryptDocument proces");
         e.setName("MyApplication/EncryptDocument");
         e.setServiceId("MyApplication/EncryptDocument");
         e.setOperationName("invoke");

         //Set Configuration values for the Email endPoint
         e.setConfigParameterAsText(EmailEndpointConfigConstants.PROPERTY_EMAILPROVIDER_CRON_EXPRESSION,"");
         e.setConfigParameterAsText(EmailEndpointConfigConstants.PROPERTY_EMAILPROVIDER_REPREAT_COUNT,"-1");
         e.setConfigParameterAsText(EmailEndpointConfigConstants.PROPERTY_EMAILPROVIDER_REPREAT_INTERVAL,"10");
         e.setConfigParameterAsText(EmailEndpointConfigConstants.PROPERTY_EMAILPROVIDER_START_DELAY,"0");
         e.setConfigParameterAsText(EmailEndpointConfigConstants.PROPERTY_EMAILPROVIDER_BATCH_SIZE,"2");
         e.setConfigParameterAsText(EmailEndpointConfigConstants.PROPERTY_EMAILPROVIDER_USERNAME,"SuperAdmin");
         e.setConfigParameterAsText(EmailEndpointConfigConstants.PROPERTY_EMAILPROVIDER_DOMAINNAME,"DefaultDom");
         e.setConfigParameterAsText(EmailEndpointConfigConstants.PROPERTY_EMAILPROVIDER_DOMAINPATTERN,"*");
         e.setConfigParameterAsText(EmailEndpointConfigConstants.PROPERTY_EMAILPROVIDER_FILEPATTERN,"*");
         e.setConfigParameterAsText(EmailEndpointConfigConstants.PROPERTY_EMAILPROVIDER_RECIPIENT_SUCCESSFUL_JOB,"sender");
         e.setConfigParameterAsText(EmailEndpointConfigConstants.PROPERTY_EMAILPROVIDER_RECIPIENT_FAILED_JOB,"sender");
         e.setConfigParameterAsText(EmailEndpointConfigConstants.PROPERTY_EMAILPROVIDER_INBOX_HOST,"sj-lost");
         e.setConfigParameterAsText(EmailEndpointConfigConstants.PROPERTY_EMAILPROVIDER_INBOX_PORT,"0");
         e.setConfigParameterAsText(EmailEndpointConfigConstants.PROPERTY_EMAILPROVIDER_PROTOCOL,"pop3");
         e.setConfigParameterAsText(EmailEndpointConfigConstants.PROPERTY_EMAILPROVIDER_INBOX_TIMEOUT,"60");
         e.setConfigParameterAsText(EmailEndpointConfigConstants.PROPERTY_EMAILPROVIDER_INBOX_USER,"scott");
         e.setConfigParameterAsText(EmailEndpointConfigConstants.PROPERTY_EMAILPROVIDER_INBOX_PASSWORD,"password");
         e.setConfigParameterAsText(EmailEndpointConfigConstants.PROPERTY_EMAILPROVIDER_INBOX_SSL,"false");
         e.setConfigParameterAsText(EmailEndpointConfigConstants.PROPERTY_EMAILPROVIDER_SMTP_HOST,"sj-lost");
         e.setConfigParameterAsText(EmailEndpointConfigConstants.PROPERTY_EMAILPROVIDER_SMTP_PORT,"25");
         e.setConfigParameterAsText(EmailEndpointConfigConstants.PROPERTY_EMAILPROVIDER_SMTP_USER,"scott");
         e.setConfigParameterAsText(EmailEndpointConfigConstants.PROPERTY_EMAILPROVIDER_SMTP_PASSWORD,"password");
         e.setConfigParameterAsText(EmailEndpointConfigConstants.PROPERTY_EMAILPROVIDER_CHARSET,"password");
         e.setConfigParameterAsText(EmailEndpointConfigConstants.PROPERTY_EMAILPROVIDER_SMTP_SSL,"false");
         e.setConfigParameterAsText(EmailEndpointConfigConstants.PROPERTY_EMAILPROVIDER_FAILED_FOLDER,"failedJobFolder");

         //Define input parameter values
         e.setInputParameterMapping("InDoc",
                 "com.adobe.idp.Document",
                 "variable",
                 "*.pdf");

         //Define the output parameter values
         e.setOutputParameterMapping("SecuredDoc",
                 "com.adobe.idp.Document",
                 "%F.pdf");

         //Create the Email Endpoint
         Endpoint endPoint = endPointClient.createEndpoint(e);

         //Enable the Email Endpoint
         endPointClient.enable(endPoint);

     }catch (Exception e) {
          e.printStackTrace();
         }

     }
 }

Início rápido: Adicionar um terminal Remoting usando a API Java quickstart-adding-a-remoting-endpoint-using-the-java-api

O seguinte exemplo de código Java adiciona um terminal Remoting a um serviço chamado MyApplication/EncryptDocument. (Consulte Adicionar pontos finais remotos.)

 /*
     * This Java Quick Start uses the following JAR files
     * 1. adobe-livecycle-client.jar
     * 2. adobe-usermanager-client.jar
     * 3. activation.jar (required for SOAP mode)
     * 4. axis.jar (required for SOAP mode)
     * 5. commons-codec-1.3.jar (required for SOAP mode)
     * 6. commons-collections-3.2.jar  (required for SOAP mode)
     * 7. commons-discovery.jar (required for SOAP mode)
     * 8. commons-logging.jar (required for SOAP mode)
     * 9. dom3-xml-apis-2.5.0.jar (required for SOAP mode)
     * 10. jaxen-1.1-beta-9.jar (required for SOAP mode)
     * 11. jaxrpc.jar (required for SOAP mode)
     * 12. log4j.jar (required for SOAP mode)
     * 13. mail.jar (required for SOAP mode)
     * 14. saaj.jar (required for SOAP mode)
     * 15. wsdl4j.jar (required for SOAP mode)
     * 16. xalan.jar (required for SOAP mode)
     * 17. xbean.jar (required for SOAP mode)
     * 18. xercesImpl.jar (required for SOAP mode)
     *
     * The JBoss files must be kept in the jboss\client folder. You can copy the client folder to
     * your local development environment and then include the 3 JBoss JAR files in your class path
     *
     * These JAR files are located in the following path:
     * <install directory>/sdk/client-libs/common
     *
     *
     * <install directory>/jboss/bin/client
     *
     * If you want to invoke a remote forms server instance and there is a
     * firewall between the client application and the server, then it is
     * recommended that you use the SOAP mode. When using the SOAP mode,
     * you have to include additional JAR files located in the following
     * path
     * <install directory>/sdk/client-libs/thirdparty
     *
     * For information about the SOAP
     * mode and the additional JAR files that need to be included,
     * see "Setting connection properties" in Programming
     * with AEM Forms
     *
     * For complete details about the location of the AEM Forms JAR files,
     * see "Including AEM Forms Java library files" in Programming
     * with AEM Forms
     */

 import java.util.Properties;
 import com.adobe.idp.dsc.clientsdk.ServiceClientFactory;
 import com.adobe.idp.dsc.clientsdk.ServiceClientFactoryProperties;
 import com.adobe.idp.dsc.registry.endpoint.CreateEndpointInfo;
 import com.adobe.idp.dsc.registry.endpoint.client.EndpointRegistryClient;
 import com.adobe.idp.dsc.registry.infomodel.Endpoint;

 /**
     * This Java Quick Start adds a Remoting endpoint to a service named MyApplication/EncryptDocument
     */
 public class AddRemotingEndPoint {

     public static void main(String[] args) {

     try{
         //Set connection properties    required to invoke AEM Forms
         Properties ConnectionProps = new Properties();

         ConnectionProps.setProperty(ServiceClientFactoryProperties.DSC_DEFAULT_SOAP_ENDPOINT, "https://[server]:[port]");
         ConnectionProps.setProperty(ServiceClientFactoryProperties.DSC_TRANSPORT_PROTOCOL,ServiceClientFactoryProperties.DSC_SOAP_PROTOCOL);
         ConnectionProps.setProperty(ServiceClientFactoryProperties.DSC_SERVER_TYPE, "JBoss");
         ConnectionProps.setProperty(ServiceClientFactoryProperties.DSC_CREDENTIAL_USERNAME, "administrator");
         ConnectionProps.setProperty(ServiceClientFactoryProperties.DSC_CREDENTIAL_PASSWORD, "password");

         //Create a ServiceClientFactory object
         ServiceClientFactory myFactory = ServiceClientFactory.createInstance(ConnectionProps);

         //Create a ConnectorRegistryClient object
         EndpointRegistryClient endPointClient = new EndpointRegistryClient(myFactory);

         //Create an Remoting Endpoint for the MyApplication/EncryptDocument process
         CreateEndpointInfo e = new CreateEndpointInfo();
         e.setConnectorId("Remoting");
         e.setDescription("Remoting endpoint for the MyApplication/EncryptDocument proces");
         e.setName("EncryptDocumentRemoting");
         e.setServiceId("MyApplication/EncryptDocument");
         e.setOperationName("*");

         //Create the EndPoint
         Endpoint endPoint = endPointClient.createEndpoint(e);

         //Enable the Endpoint
         endPointClient.enable(endPoint);

     }catch (Exception e) {
          e.printStackTrace();
         }

     }
 }

Início rápido: Adicionar um ponto de extremidade do TaskManager usando a API do Java quickstart-adding-a-taskmanager-endpoint-using-the-java-api

O seguinte exemplo de código Java adiciona um ponto de extremidade do TaskManager a um serviço chamado MyApplication/EncryptDocument. Observe que o nome da categoria é EncryptProcess. (Consulte Adicionar pontos de extremidade do Gerenciador de Tarefas.)

 /*
     * This Java Quick Start uses the following JAR files
     * 1. adobe-livecycle-client.jar
     * 2. adobe-usermanager-client.jar
     * 3. activation.jar (required for SOAP mode)
     * 4. axis.jar (required for SOAP mode)
     * 5. commons-codec-1.3.jar (required for SOAP mode)
     * 6. commons-collections-3.2.jar  (required for SOAP mode)
     * 7. commons-discovery.jar (required for SOAP mode)
     * 8. commons-logging.jar (required for SOAP mode)
     * 9. dom3-xml-apis-2.5.0.jar (required for SOAP mode)
     * 10. jaxen-1.1-beta-9.jar (required for SOAP mode)
     * 11. jaxrpc.jar (required for SOAP mode)
     * 12. log4j.jar (required for SOAP mode)
     * 13. mail.jar (required for SOAP mode)
     * 14. saaj.jar (required for SOAP mode)
     * 15. wsdl4j.jar (required for SOAP mode)
     * 16. xalan.jar (required for SOAP mode)
     * 17. xbean.jar (required for SOAP mode)
     * 18. xercesImpl.jar (required for SOAP mode)
     *
     * The JBoss files must be kept in the jboss\client folder. You can copy the client folder to
     * your local development environment and then include the 3 JBoss JAR files in your class path
     *
     * These JAR files are located in the following path:
     * <install directory>/sdk/client-libs/common
     *
     *
     * <install directory>/jboss/bin/client
     *
     * If you want to invoke a remote forms server instance and there is a
     * firewall between the client application and the server, then it is
     * recommended that you use the SOAP mode. When using the SOAP mode,
     * you have to include additional JAR files located in the following
     * path
     * <install directory>/sdk/client-libs/thirdparty
     *
     * For information about the SOAP
     * mode and the additional JAR files that need to be included,
     * see "Setting connection properties" in Programming
     * with AEM Forms
     *
     * For complete details about the location of the AEM Forms JAR files,
     * see "Including AEM Forms Java library files" in Programming
     * with AEM Forms
     */
 import java.util.Properties;
 import com.adobe.idp.dsc.clientsdk.ServiceClientFactory;
 import com.adobe.idp.dsc.clientsdk.ServiceClientFactoryProperties;
 import com.adobe.idp.dsc.registry.endpoint.CreateEndpointCategoryInfo;
 import com.adobe.idp.dsc.registry.endpoint.CreateEndpointInfo;
 import com.adobe.idp.dsc.registry.endpoint.client.EndpointRegistryClient;
 import com.adobe.idp.dsc.registry.infomodel.Endpoint;
 import com.adobe.idp.dsc.registry.infomodel.EndpointCategory;

 public class AddTaskManagerEndPoint {

     public static void main(String[] args) {

     try{
         //Set connection properties    required to invoke AEM Forms
         Properties ConnectionProps = new Properties();

         ConnectionProps.setProperty(ServiceClientFactoryProperties.DSC_DEFAULT_SOAP_ENDPOINT, "https://[server]:[port]");
         ConnectionProps.setProperty(ServiceClientFactoryProperties.DSC_TRANSPORT_PROTOCOL,ServiceClientFactoryProperties.DSC_SOAP_PROTOCOL);
         ConnectionProps.setProperty(ServiceClientFactoryProperties.DSC_SERVER_TYPE, "JBoss");
         ConnectionProps.setProperty(ServiceClientFactoryProperties.DSC_CREDENTIAL_USERNAME, "administrator");
         ConnectionProps.setProperty(ServiceClientFactoryProperties.DSC_CREDENTIAL_PASSWORD, "password");

         //Create a ServiceClientFactory object
         ServiceClientFactory myFactory = ServiceClientFactory.createInstance(ConnectionProps);

         //Create a ConnectorRegistryClient object
         EndpointRegistryClient endPointClient = new EndpointRegistryClient(myFactory);

         //Create the category associated with this TaskManager endpoint
         CreateEndpointCategoryInfo catInfo = new CreateEndpointCategoryInfo("EncryptProcess", "Enables this process to be invoked from within Workspace");
         EndpointCategory cat = endPointClient.createEndpointCategory(catInfo);

         //Set TaskManager endpoint attributes
         CreateEndpointInfo e = new CreateEndpointInfo();
         e.setConnectorId("TaskManagerConnector");
         e.setDescription("TaskManagerConnector endpoint for the MyApplication/EncryptDocument process");
         e.setName("MyApplication/EncryptDocument");
         e.setServiceId("MyApplication2/EncryptDocument");
         e.setCategoryId(cat.getId());
         e.setOperationName("invoke");

         //Create the TaskManagerConnector endpoint
         Endpoint endPoint = endPointClient.createEndpoint(e);

         //Enable the endpoint
         endPointClient.enable(endPoint);

     }catch (Exception e) {
          e.printStackTrace();
         }

     }
 }

Início rápido: Modificação de um terminal usando a API do Java quickstart-modifying-an-endpoint-using-the-java-api

O exemplo de código Java a seguir modifica um endpoint de Pasta Assistida. O endpoint é para a variável MyApplication/EncryptDocument processo. A pasta assistida é alterada para C:\NewWatchedFolder. (Consulte Modificação de Endpoints.)

 /*
     * This Java Quick Start uses the following JAR files
     * 1. adobe-livecycle-client.jar
     * 2. adobe-usermanager-client.jar
     * 3. activation.jar (required for SOAP mode)
     * 4. axis.jar (required for SOAP mode)
     * 5. commons-codec-1.3.jar (required for SOAP mode)
     * 6. commons-collections-3.2.jar  (required for SOAP mode)
     * 7. commons-discovery.jar (required for SOAP mode)
     * 8. commons-logging.jar (required for SOAP mode)
     * 9. dom3-xml-apis-2.5.0.jar (required for SOAP mode)
     * 10. jaxen-1.1-beta-9.jar (required for SOAP mode)
     * 11. jaxrpc.jar (required for SOAP mode)
     * 12. log4j.jar (required for SOAP mode)
     * 13. mail.jar (required for SOAP mode)
     * 14. saaj.jar (required for SOAP mode)
     * 15. wsdl4j.jar (required for SOAP mode)
     * 16. xalan.jar (required for SOAP mode)
     * 17. xbean.jar (required for SOAP mode)
     * 18. xercesImpl.jar (required for SOAP mode)
     *
     * The JBoss files must be kept in the jboss\client folder. You can copy the client folder to
     * your local development environment and then include the 3 JBoss JAR files in your class path
     *
     * These JAR files are located in the following path:
     * <install directory>/sdk/client-libs/common
     *
     *
     * <install directory>/jboss/bin/client
     *
     * If you want to invoke a remote forms server instance and there is a
     * firewall between the client application and the server, then it is
     * recommended that you use the SOAP mode. When using the SOAP mode,
     * you have to include additional JAR files located in the following
     * path
     * <install directory>/sdk/client-libs/thirdparty
     *
     * For information about the SOAP
     * mode and the additional JAR files that need to be included,
     * see "Setting connection properties" in Programming
     * with AEM Forms
     *
     * For complete details about the location of the AEM Forms JAR files,
     * see "Including AEM Forms Java library files" in Programming
     * with AEM Forms
     */
 import java.util.Iterator;
 import java.util.List;
 import java.util.Properties;
 import com.adobe.idp.dsc.clientsdk.ServiceClientFactory;
 import com.adobe.idp.dsc.clientsdk.ServiceClientFactoryProperties;
 import com.adobe.idp.dsc.filter.PagingFilter;
 import com.adobe.idp.dsc.registry.endpoint.ModifyEndpointInfo;
 import com.adobe.idp.dsc.registry.endpoint.client.EndpointRegistryClient;
 import com.adobe.idp.dsc.registry.infomodel.Endpoint;

 public class ModifyEndPoint {

     public static void main(String[] args) {

     try{
         Endpoint _endpoint = null;

         //Set connection properties    required to invoke AEM Forms
         Properties ConnectionProps = new Properties();
         ConnectionProps.setProperty(ServiceClientFactoryProperties.DSC_DEFAULT_SOAP_ENDPOINT, "https://[server]:[port]");
         ConnectionProps.setProperty(ServiceClientFactoryProperties.DSC_TRANSPORT_PROTOCOL,ServiceClientFactoryProperties.DSC_SOAP_PROTOCOL);
         ConnectionProps.setProperty(ServiceClientFactoryProperties.DSC_SERVER_TYPE, "JBoss");
         ConnectionProps.setProperty(ServiceClientFactoryProperties.DSC_CREDENTIAL_USERNAME, "administrator");
         ConnectionProps.setProperty(ServiceClientFactoryProperties.DSC_CREDENTIAL_PASSWORD, "password");

         //Create a ServiceClientFactory object
         ServiceClientFactory myFactory = ServiceClientFactory.createInstance(ConnectionProps);

         //Create an EndpointRegistryClient object
         EndpointRegistryClient endPointClient = new EndpointRegistryClient(myFactory);

         //Retrieve all endpoints
         List allEndpoints = endPointClient.getEndpoints((PagingFilter)null);

         //Iterate through the returned list of endpoints
         Iterator iter = allEndpoints.iterator();
         int i =0;
         while (iter.hasNext()) {
             _endpoint = (Endpoint) iter.next();

             //Look for an endpoint that belongs to the
             //EncryptDocument service
             String serviceID = _endpoint.getServiceId();

             if (serviceID.matches("MyApplication/EncryptDocument"))
             {
                 //Get the WatchedFolder endpoint
                 String connId = _endpoint.getConnectorId();
                 if (connId.matches("WatchedFolder"))
                 {

                     //Create a ModifyEndpointInfo object
                     ModifyEndpointInfo endpointInfo =new ModifyEndpointInfo();

                     //Modify configuration values
                     endpointInfo.setId(_endpoint.getId());
                     endpointInfo.setConfigParameterAsText("url", "C:\\NewWatchedFolder");
                     endpointInfo.setConfigParameterAsText("asynchronous","true");
                     endpointInfo.setConfigParameterAsText("repeatInterval","5");
                     endpointInfo.setConfigParameterAsText("repeatCount","-1");
                     endpointInfo.setConfigParameterAsText("throttleOn","false");
                     endpointInfo.setConfigParameterAsText("userName","SuperAdmin");
                     endpointInfo.setConfigParameterAsText("domainName","DefaultDom");
                     endpointInfo.setConfigParameterAsText("batchSize","2");
                     endpointInfo.setConfigParameterAsText("waitTime","0");
                     endpointInfo.setConfigParameterAsText("excludeFilePattern",".txt");
                     endpointInfo.setConfigParameterAsText("includeFilePattern","*");
                     endpointInfo.setConfigParameterAsText("resultFolderName","result/%Y/%M/%D/");
                     endpointInfo.setConfigParameterAsText("preserveFolderName","preserve/%Y/%M/%D/");
                     endpointInfo.setConfigParameterAsText("failureFolderName","failure/%Y/%M/%D/");
                     endpointInfo.setConfigParameterAsText("preserveOnFailure","true");
                     endpointInfo.setConfigParameterAsText("overwriteDuplicateFilename","false");

                     //Define input parameter values
                     endpointInfo.setInputParameterMapping("inDoc",
                             "com.adobe.idp.Document",
                             "variable",
                             "*.pdf");

                     //Define the output parameter values
                     endpointInfo.setOutputParameterMapping("outDoc",
                             "com.adobe.idp.Document",
                             "%F.pdf");

                     //Modify the endpoint for this service
                     endPointClient.modifyEndpoint(endpointInfo);
                     System.out.println("The EJB endpoint for the EncryptDocument service was modified");
                 }
             i++;
             }
         }
     }catch (Exception e) {
          e.printStackTrace();
         }
     }
 }

Início rápido: Remoção de um terminal usando a API do Java quickstart-removing-an-endpoint-using-the-java-api

O código Java a seguir remove um ponto de extremidade EJB de um serviço chamado MyApplication/EncryptDocument. (Consulte Remoção de pontos finais.)

 /*
     * This Java Quick Start uses the following JAR files
     * 1. adobe-livecycle-client.jar
     * 2. adobe-usermanager-client.jar
     * 3. activation.jar (required for SOAP mode)
     * 4. axis.jar (required for SOAP mode)
     * 5. commons-codec-1.3.jar (required for SOAP mode)
     * 6. commons-collections-3.2.jar  (required for SOAP mode)
     * 7. commons-discovery.jar (required for SOAP mode)
     * 8. commons-logging.jar (required for SOAP mode)
     * 9. dom3-xml-apis-2.5.0.jar (required for SOAP mode)
     * 10. jaxen-1.1-beta-9.jar (required for SOAP mode)
     * 11. jaxrpc.jar (required for SOAP mode)
     * 12. log4j.jar (required for SOAP mode)
     * 13. mail.jar (required for SOAP mode)
     * 14. saaj.jar (required for SOAP mode)
     * 15. wsdl4j.jar (required for SOAP mode)
     * 16. xalan.jar (required for SOAP mode)
     * 17. xbean.jar (required for SOAP mode)
     * 18. xercesImpl.jar (required for SOAP mode)
     *
     * The JBoss files must be kept in the jboss\client folder. You can copy the client folder to
     * your local development environment and then include the 3 JBoss JAR files in your class path
     *
     * These JAR files are located in the following path:
     * <install directory>/sdk/client-libs/common
     *
     *
     * <install directory>/jboss/bin/client
     *
     * If you want to invoke a remote forms server instance and there is a
     * firewall between the client application and the server, then it is
     * recommended that you use the SOAP mode. When using the SOAP mode,
     * you have to include additional JAR files located in the following
     * path
     * <install directory>/sdk/client-libs/thirdparty
     *
     * For information about the SOAP
     * mode and the additional JAR files that need to be included,
     * see "Setting connection properties" in Programming
     * with AEM Forms
     *
     * For complete details about the location of the AEM Forms JAR files,
     * see "Including AEM Forms Java library files" in Programming
     * with AEM Forms
     */
 import java.util.Iterator;
 import java.util.List;
 import java.util.Properties;
 import com.adobe.idp.dsc.clientsdk.ServiceClientFactory;
 import com.adobe.idp.dsc.clientsdk.ServiceClientFactoryProperties;
 import com.adobe.idp.dsc.filter.PagingFilter;
 import com.adobe.idp.dsc.registry.endpoint.client.EndpointRegistryClient;
 import com.adobe.idp.dsc.registry.infomodel.Endpoint;

 /**
     * This Java Quick Start removes an EJB endpoint from a service named MyApplication/EncryptDocument
     */
 public class RemoveEndPoints {

     public static void main(String[] args) {

     try{
         Endpoint _endpoint = null;

         //Set connection properties    required to invoke AEM Forms
         Properties ConnectionProps = new Properties();
         ConnectionProps.setProperty(ServiceClientFactoryProperties.DSC_DEFAULT_SOAP_ENDPOINT, "https://[server]:[port]");
         ConnectionProps.setProperty(ServiceClientFactoryProperties.DSC_TRANSPORT_PROTOCOL,ServiceClientFactoryProperties.DSC_SOAP_PROTOCOL);
         ConnectionProps.setProperty(ServiceClientFactoryProperties.DSC_SERVER_TYPE, "JBoss");
         ConnectionProps.setProperty(ServiceClientFactoryProperties.DSC_CREDENTIAL_USERNAME, "administrator");
         ConnectionProps.setProperty(ServiceClientFactoryProperties.DSC_CREDENTIAL_PASSWORD, "password");

         //Create a ServiceClientFactory object
         ServiceClientFactory myFactory = ServiceClientFactory.createInstance(ConnectionProps);

         //Create an EndpointRegistryClient object
         EndpointRegistryClient endPointClient = new EndpointRegistryClient(myFactory);

         //Get all endpoints
         List allEndpoints = endPointClient.getEndpoints((PagingFilter)null);

         //Iterate through the returned list of endpoints
         Iterator iter = allEndpoints.iterator();
         int i =0;
         while (iter.hasNext()) {
             _endpoint = (Endpoint) iter.next();

             //Look for an endpoint that belongs to the
             //EncryptDocument service
             String serviceID = _endpoint.getServiceId();

             if (serviceID.matches("MyApplication/EncryptDocument"))
             {
                 //Get the EJB endpoint that belongs to
                 //this service
                 String connId = _endpoint.getConnectorId();
                 if (connId.matches("EJB"))
                 {
                     //Remove the EJB endpoint for this service
                     endPointClient.remove(_endpoint);
                     System.out.println("The EJB endpoint for the EncryptDocument service was removed");
                 }
             i++;
             }
         }
     }catch (Exception e) {
          e.printStackTrace();
         }
     }
 }

Início rápido: Recuperação de informações do conector do ponto de extremidade usando a API Java quickstart-retrieving-endpoint-connector-information-using-the-java-api

O código Java a seguir recupera informações sobre um endpoint de Pasta assistida. As informações sobre cada valor de configuração são recuperadas e exibidas. Essa lista de códigos especifica se cada valor de configuração é obrigatório ou opcional. Além disso, o nome e o valor de cada valor de configuração são exibidos. (Consulte Recuperando informações do conector de ponto de extremidade.)

 /*
     * This Java Quick Start uses the following JAR files
     * 1. adobe-livecycle-client.jar
     * 2. adobe-usermanager-client.jar
     * 3. activation.jar (required for SOAP mode)
     * 4. axis.jar (required for SOAP mode)
     * 5. commons-codec-1.3.jar (required for SOAP mode)
     * 6. commons-collections-3.2.jar  (required for SOAP mode)
     * 7. commons-discovery.jar (required for SOAP mode)
     * 8. commons-logging.jar (required for SOAP mode)
     * 9. dom3-xml-apis-2.5.0.jar (required for SOAP mode)
     * 10. jaxen-1.1-beta-9.jar (required for SOAP mode)
     * 11. jaxrpc.jar (required for SOAP mode)
     * 12. log4j.jar (required for SOAP mode)
     * 13. mail.jar (required for SOAP mode)
     * 14. saaj.jar (required for SOAP mode)
     * 15. wsdl4j.jar (required for SOAP mode)
     * 16. xalan.jar (required for SOAP mode)
     * 17. xbean.jar (required for SOAP mode)
     * 18. xercesImpl.jar (required for SOAP mode)
     *
     * The JBoss files must be kept in the jboss\client folder. You can copy the client folder to
     * your local development environment and then include the 3 JBoss JAR files in your class path
     *
     * These JAR files are located in the following path:
     * <install directory>/sdk/client-libs/common
     *
     *
     * <install directory>/jboss/bin/client
     *
     * If you want to invoke a remote forms server instance and there is a
     * firewall between the client application and the server, then it is
     * recommended that you use the SOAP mode. When using the SOAP mode,
     * you have to include additional JAR files located in the following
     * path
     * <install directory>/sdk/client-libs/thirdparty
     *
     * For information about the SOAP
     * mode and the additional JAR files that need to be included,
     * see "Setting connection properties" in Programming
     * with AEM Forms
     *
     * For complete details about the location of the AEM Forms JAR files,
     * see "Including AEM Forms Java library files" in Programming
     * with AEM Forms
     */
 import java.util.Properties;
 import com.adobe.idp.dsc.clientsdk.ServiceClientFactory;
 import com.adobe.idp.dsc.clientsdk.ServiceClientFactoryProperties;
 import com.adobe.idp.dsc.registry.connector.client.ConnectorRegistryClient;
 import com.adobe.idp.dsc.registry.infomodel.ConfigParameter;
 import com.adobe.idp.dsc.registry.infomodel.Endpoint;

 public class RetrieveConnectorInfo {

     public static void main(String[] args) {

     try{
         Endpoint _endpoint = null;

         //Set connection properties    required to invoke AEM Forms
         Properties ConnectionProps = new Properties();
         ConnectionProps.setProperty(ServiceClientFactoryProperties.DSC_DEFAULT_SOAP_ENDPOINT, "https://[server]:[port]");
         ConnectionProps.setProperty(ServiceClientFactoryProperties.DSC_TRANSPORT_PROTOCOL,ServiceClientFactoryProperties.DSC_SOAP_PROTOCOL);
         ConnectionProps.setProperty(ServiceClientFactoryProperties.DSC_SERVER_TYPE, "JBoss");
         ConnectionProps.setProperty(ServiceClientFactoryProperties.DSC_CREDENTIAL_USERNAME, "administrator");
         ConnectionProps.setProperty(ServiceClientFactoryProperties.DSC_CREDENTIAL_PASSWORD, "password");

         //Create a ServiceClientFactory object
         ServiceClientFactory myFactory = ServiceClientFactory.createInstance(ConnectionProps);

         //Create a ConnectorRegistry Client object
         ConnectorRegistryClient conClient = new ConnectorRegistryClient(myFactory);

         //Specify WatchedFolder as the connector type
         Endpoint endpoint = conClient.getEndpointDefinition("WatchedFolder");

         //Get all the configuration values associated with this connector type
         ConfigParameter[] allConfigParams = endpoint.getConfigParameters();
         int len = allConfigParams.length;

         //Get the value of the individual configuration parameter values
         //and which ones are required and which ones are optional
         for (int i=0; i<len; i++)
         {
             //Get an individual ConfigParameter object
             ConfigParameter cp = (ConfigParameter)allConfigParams[i];

             //Determine if this configuration value is required
             if (cp.isRequired() == true)
                 System.out.println("This required configuration value name is "+cp.getName() + ". Its value is "+cp.getTextValue());
             else
                 System.out.println("This optional configuration value name is "+cp.getName() + ". Its value is "+cp.getTextValue());
         }
     }catch (Exception e) {
          e.printStackTrace();
         }
     }
 }
recommendation-more-help
a6ebf046-2b8b-4543-bd46-42a0d77792da