Assembler サービス Java API クイックスタート(SOAP)

Assembler サービスで Java API クイックスタート(SOAP)を使用できます

クイックスタート(SOAP モード):Java API を使用した PDF ドキュメントのアセンブリ

クイックスタート(SOAP モード):Java API を使用した PDF ドキュメントの分割

クイックスタート(SOAP モード):Java API を使用した暗号化された PDF ドキュメントのアセンブリ

クイックスタート(SOAP モード):ベイツ番号を使用した PDF ドキュメントを、Java API を使用してアセンブリする

クイックスタート(SOAP モード):Java API を使用した PDF ドキュメントのアセンブリ

クイックスタート(SOAP モード):Java API を使用したドキュメントの PDF/A 準拠の確認

クイックスタート(SOAP モード):Java API を使用した DDX ドキュメントの検証

クイックスタート(SOAP モード):Java API を使用した、ブックマークを含む PDF ドキュメントのアセンブリ

クイックスタート(SOAP モード):Java API を使用した DDX ドキュメントの動的な作成

クイックスタート(SOAP モード):Java API を使用した PDF ポートフォリオのアセンブリ

クイックスタート(SOAP モード):Java API を使用した複数の XDP フラグメントのアセンブリ

AEM Forms の操作は、AEM Forms の厳密に型指定された API を使用して実行できます。接続モードは、SOAP に設定する必要があります。

メモ

『AEM Forms によるプログラミング』にあるクイックスタートは、JBoss アプリケーションサーバーと Microsoft Windows オペレーティングシステムにデプロイされる Forms サーバーに基づいています。ただし、UNIX などの別のオペレーティングシステムを使用している場合は、Windows 固有のパスを、該当するオペレーティングシステムでサポートされているパスに置き換えます。 同様に、別の J2EE アプリケーションサーバーを使用している場合は、有効な接続プロパティを必ず指定してください。 (接続プロパティの設定を参照)。

クイックスタート(SOAP モード):Java API を使用した PDF ドキュメントのアセンブリ

次の Java コードの例では、* map.pdf*という名前の 2 つのPDFソースドキュメントを結合します。 directions.pdf を単一のPDF文書に こうして作られた単一の PDF 文書の名前は AssemblerResultPDF.pdf です。DDX ドキュメントの名前は shell.xml です。(プログラムによる PDF ドキュメントの組み立てを参照してください)

 /*
     * This Java Quick Start uses the SOAP mode and contains the following JAR files
     * in the class path:
     * 1. adobe-assembler-client.jar
     * 2. adobe-livecycle-client.jar
     * 3. adobe-usermanager-client.jar
     * 4. adobe-utilities.jar
     * 5. jboss-client.jar (use a different JAR file if the forms server is not deployed
     * on JBoss)
     * 6. activation.jar (required for SOAP mode)
     * 7. axis.jar (required for SOAP mode)
     * 8. commons-codec-1.3.jar (required for SOAP mode)
     * 9.  commons-collections-3.1.jar  (required for SOAP mode)
     * 10. commons-discovery.jar (required for SOAP mode)
     * 11. commons-logging.jar (required for SOAP mode)
     * 12. dom3-xml-apis-2.5.0.jar (required for SOAP mode)
     * 13. jaxen-1.1-beta-9.jar (required for SOAP mode)
     * 14. jaxrpc.jar (required for SOAP mode)
     * 15. log4j.jar (required for SOAP mode)
     * 16. mail.jar (required for SOAP mode)
     * 17. saaj.jar (required for SOAP mode)
     * 18. wsdl4j.jar (required for SOAP mode)
     * 19. xalan.jar (required for SOAP mode)
     * 20. xbean.jar (required for SOAP mode)
     * 21. xercesImpl.jar (required for SOAP mode)
     *
     * These JAR files are located in the following path:
     * <install directory>/sdk/client-libs/common
     *
     * The adobe-utilities.jar file is located in the following path:
     * <install directory>/sdk/client-libs/jboss
     *
     * The jboss-client.jar file is located in the following path:
     * <install directory>/jboss/bin/client
     *
     * SOAP required JAR files are located in the following path:
     * <install directory>/sdk/client-libs/thirdparty
     *
     * If you want to invoke a remote forms server instance and there is a
     * firewall between the client application and the server, then it is
     * recommended that you use the SOAP mode. When using the SOAP mode,
     * you have to include these additional JAR files
     *
     * For information about the SOAP
     * mode, see "Setting connection properties" in Programming
     * with AEM Forms
     *
     * The following XML represents the DDX document used in this quick start:
     * <?xml version="1.0" encoding="UTF-8"?>
     * <DDX xmlns="https://ns.adobe.com/DDX/1.0/">
     * <PDF result="out.pdf">
     * <PDF source="map.pdf" />
     * <PDF source="directions.pdf" />
     * </PDF>
     *</DDX>
     */
 import com.adobe.livecycle.assembler.client.*;
 import java.util.*;
 import java.io.File;
 import java.io.FileInputStream;
 import com.adobe.idp.Document;
 import com.adobe.idp.dsc.clientsdk.ServiceClientFactory;
 import com.adobe.idp.dsc.clientsdk.ServiceClientFactoryProperties;

 public class InvokeAssemblerSOAP
 {
     public static void main(String[] args) {
         try{
             //Set connection properties required to invoke AEM Forms using SOAP mode
             Properties connectionProps = new Properties();
             connectionProps.setProperty(ServiceClientFactoryProperties.DSC_DEFAULT_SOAP_ENDPOINT, "https://[server]:[port]");
             connectionProps.setProperty(ServiceClientFactoryProperties.DSC_TRANSPORT_PROTOCOL,ServiceClientFactoryProperties.DSC_SOAP_PROTOCOL);
             connectionProps.setProperty(ServiceClientFactoryProperties.DSC_SERVER_TYPE, "JBoss");
             connectionProps.setProperty(ServiceClientFactoryProperties.DSC_CREDENTIAL_USERNAME, "administrator");
             connectionProps.setProperty(ServiceClientFactoryProperties.DSC_CREDENTIAL_PASSWORD, "password");

             //Create a ServiceClientFactory instance
             ServiceClientFactory myFactory = ServiceClientFactory.createInstance(connectionProps);

             //Create an AssemblerServiceClient object
             AssemblerServiceClient assemblerClient = new AssemblerServiceClient(myFactory);

             //Create a FileInputStream object based on an existing DDX file
             FileInputStream myDDXFile = new FileInputStream("C:\\shell.xml");

             //Create a Document object based on the DDX file
             Document myDDX = new Document(myDDXFile);

             //Create a Map object to store PDF source documents
             Map inputs = new HashMap();
             FileInputStream mySourceMap = new FileInputStream("C:\\map.pdf");
             FileInputStream mySourceOptions = new FileInputStream("C:\\directions.pdf");

             //Create a Document object based on the map.pdf source file
             Document myPDFMapSource = new Document(mySourceMap);

             //Create a Document object based on the directions.pdf source file
             Document myPDFOptionsSource = new Document(mySourceOptions);

             //Place two entries into the Map object
             inputs.put("map.pdf",myPDFMapSource);
             inputs.put("directions.pdf",myPDFOptionsSource);

             //Create an AssemblerOptionsSpec object
             AssemblerOptionSpec assemblerSpec = new AssemblerOptionSpec();
             assemblerSpec.setFailOnError(false);

             //Submit the job to Assembler service
             AssemblerResult jobResult = assemblerClient.invokeDDX(myDDX,inputs,assemblerSpec);
             java.util.Map allDocs = jobResult.getDocuments();

             //Retrieve the result PDF document from the Map object
             Document outDoc = null;

             //Iterate through the map object to retrieve the result PDF document
             for (Iterator i = allDocs.entrySet().iterator(); i.hasNext();) {
                 // Retrieve the Map object’s value
                 Map.Entry e = (Map.Entry)i.next();

                 //Get the key name as specified in the
                 //DDX document
                 String keyName = (String)e.getKey();
                 if (keyName.equalsIgnoreCase("out.pdf"))
                 {
                     Object o = e.getValue();
                     outDoc = (Document)o;

                     //Save the result PDF file
                     File myOutFile = new File("C:\\AssemblerResultPDF.pdf");
                     outDoc.copyToFile(myOutFile);
                 }
             }
         }catch (Exception e) {
             e.printStackTrace();
         }
     }
 }

クイックスタート(SOAP モード):Java API を使用した PDF ドキュメントの分割

次の Java コードの例では、AssemblerResultPDF.pdf という名前の PDF ドキュメントを分割します。DDX ドキュメントの名前は shell_disassemble.xml です。分解された各PDF文書には、 ResultPDF[数値].pdf. 例えば、分割された PDF ドキュメントのうち 1 番目のドキュメントの名前は ResultPDF1.pdf です。​このコードの例で使用されている shell_disassemble.xml DDX ドキュメントについて詳しくは、プログラムによる PDF ドキュメントの分割を参照してください。

 /*
     * This Java Quick Start uses the SOAP mode and contains the following JAR files
     * in the class path:
     * 1. adobe-assembler-client.jar
     * 2. adobe-livecycle-client.jar
     * 3. adobe-usermanager-client.jar
     * 4. adobe-utilities.jar
     * 5. jboss-client.jar (use a different JAR file if the forms server is not deployed
     * on JBoss)
     * 6. activation.jar (required for SOAP mode)
     * 7. axis.jar (required for SOAP mode)
     * 8. commons-codec-1.3.jar (required for SOAP mode)
     * 9.  commons-collections-3.1.jar  (required for SOAP mode)
     * 10. commons-discovery.jar (required for SOAP mode)
     * 11. commons-logging.jar (required for SOAP mode)
     * 12. dom3-xml-apis-2.5.0.jar (required for SOAP mode)
     * 13. jaxen-1.1-beta-9.jar (required for SOAP mode)
     * 14. jaxrpc.jar (required for SOAP mode)
     * 15. log4j.jar (required for SOAP mode)
     * 16. mail.jar (required for SOAP mode)
     * 17. saaj.jar (required for SOAP mode)
     * 18. wsdl4j.jar (required for SOAP mode)
     * 19. xalan.jar (required for SOAP mode)
     * 20. xbean.jar (required for SOAP mode)
     * 21. xercesImpl.jar (required for SOAP mode)
     *
     * These JAR files are located in the following path:
     * <install directory>/sdk/client-libs/common
     *
     * The adobe-utilities.jar file is located in the following path:
     * <install directory>/sdk/client-libs/jboss
     *
     * The jboss-client.jar file is located in the following path:
     * <install directory>/jboss/bin/client
     *
     * SOAP required JAR files are located in the following path:
     * <install directory>/sdk/client-libs/thirdparty
     *
     * If you want to invoke a remote forms server instance and there is a
     * firewall between the client application and the server, then it is
     * recommended that you use the SOAP mode. When using the SOAP mode,
     * you have to include these additional JAR files
     *
     * For information about the SOAP
     * mode, see "Setting connection properties" in Programming
     * with AEM Forms
     *
     * The following XML represents the DDX document used in this quick start:
     * <?xml version="1.0" encoding="UTF-8"?>
     *<DDX xmlns="https://ns.adobe.com/DDX/1.0/">
     * <PDFsFromBookmarks prefix="stmt">
     * <PDF source="AssemblerResultPDF.pdf"/>
     *</PDFsFromBookmarks>
     *</DDX>
     */
 import com.adobe.livecycle.assembler.client.*;
 import java.util.*;
 import java.io.File;
 import java.io.FileInputStream;
 import com.adobe.idp.Document;
 import com.adobe.idp.dsc.clientsdk.ServiceClientFactory;
 import com.adobe.idp.dsc.clientsdk.ServiceClientFactoryProperties;

 public class DisassemblePDFSOAP
 {
     public static void main(String[] args) {
         try{
             //Set connection properties required to invoke AEM Forms
             Properties connectionProps = new Properties();
             connectionProps.setProperty(ServiceClientFactoryProperties.DSC_DEFAULT_SOAP_ENDPOINT, "https://[server]:[port]");
             connectionProps.setProperty(ServiceClientFactoryProperties.DSC_TRANSPORT_PROTOCOL,ServiceClientFactoryProperties.DSC_SOAP_PROTOCOL);
             connectionProps.setProperty(ServiceClientFactoryProperties.DSC_SERVER_TYPE, "JBoss");
             connectionProps.setProperty(ServiceClientFactoryProperties.DSC_CREDENTIAL_USERNAME, "administrator");
             connectionProps.setProperty(ServiceClientFactoryProperties.DSC_CREDENTIAL_PASSWORD, "password");

             //Create a ServiceClientFactory instance
             ServiceClientFactory myFactory = ServiceClientFactory.createInstance(connectionProps);

             //Create an AssemblerServiceClient object
             AssemblerServiceClient assemblerClient = new AssemblerServiceClient(myFactory);

             //Create a FileInputStream object based on an existing DDX file
             FileInputStream myDDXFile = new FileInputStream("C:\\shell_disassemble.xml");

             //Create a Document object based on the DDX file
             Document myDDX = new Document(myDDXFile);

             //Create a Map object to store PDF source documents
             Map inputs = new HashMap();
             FileInputStream mySourceMap = new FileInputStream("C:\\AssemblerResultPDF.pdf");

             //Create a Document object based on the map.pdf source file
             Document myPDFSource = new Document(mySourceMap);

             //Place two entries into the Map object
             inputs.put("AssemblerResultPDF.pdf",myPDFSource);

             //Create an AssemblerOptionsSpec object
             AssemblerOptionSpec assemblerSpec = new AssemblerOptionSpec();
             assemblerSpec.setFailOnError(false);

             //Submit the job to the Assembler service
             AssemblerResult jobResult = assemblerClient.invokeDDX(myDDX,inputs,assemblerSpec);
             java.util.Map allDocs = jobResult.getDocuments();

             //Retrieve the result PDF documents from the Map object
             Document outDoc = null;
             int index = 0;

             //Iterate through the map object to retrieve the result PDF document
             for (Iterator i = allDocs.entrySet().iterator(); i.hasNext();) {
                 // Retrieve the Map object’s value
                 Map.Entry e = (Map.Entry)i.next();
                 Object o = e.getValue();

                 //Cast the Object to a Document
                 //and save to a file
                 outDoc = (Document)o;
                 File myOutFile = new File("C:\\ResultPDF"+index +".pdf");
                 outDoc.copyToFile(myOutFile);
                 index++;
             }
             if (index > 0)
                 System.out.println("The PDF document was disassembled into "+index+" PDF documents.");
             else
                 System.out.println("The PDF document was not disassembled.");

         }catch (Exception e) {
             System.out.println("Error OCCURRED: "+e.getMessage());
         }
     }
 }

クイックスタート(SOAP モード):Java API を使用した暗号化された PDF ドキュメントのアセンブリ

次の Java コードの例では、パスワードで暗号化されたPDFドキュメントを構築します。 保護されていない PDF ドキュメントの名前は Loan.pdf です。DDX ドキュメントの名前は shell_Encrypt.xml です。暗号化された PDF ドキュメントの名前は AssemblerEncryptedPDF.pdf です。(暗号化された PDF ドキュメントのアセンブリを参照してください)

 /*
     * This Java Quick Start uses the SOAP mode and contains the following JAR files
     * in the class path:
     * 1. adobe-assembler-client.jar
     * 2. adobe-livecycle-client.jar
     * 3. adobe-usermanager-client.jar
     * 4. adobe-utilities.jar
     * 5. jboss-client.jar (use a different JAR file if the forms server is not deployed
     * on JBoss)
     * 6. activation.jar (required for SOAP mode)
     * 7. axis.jar (required for SOAP mode)
     * 8. commons-codec-1.3.jar (required for SOAP mode)
     * 9.  commons-collections-3.1.jar  (required for SOAP mode)
     * 10. commons-discovery.jar (required for SOAP mode)
     * 11. commons-logging.jar (required for SOAP mode)
     * 12. dom3-xml-apis-2.5.0.jar (required for SOAP mode)
     * 13. jaxen-1.1-beta-9.jar (required for SOAP mode)
     * 14. jaxrpc.jar (required for SOAP mode)
     * 15. log4j.jar (required for SOAP mode)
     * 16. mail.jar (required for SOAP mode)
     * 17. saaj.jar (required for SOAP mode)
     * 18. wsdl4j.jar (required for SOAP mode)
     * 19. xalan.jar (required for SOAP mode)
     * 20. xbean.jar (required for SOAP mode)
     * 21. xercesImpl.jar (required for SOAP mode)
     *
     * These JAR files are located in the following path:
     * <install directory>/sdk/client-libs/common
     *
     * The adobe-utilities.jar file is located in the following path:
     * <install directory>/sdk/client-libs/jboss
     *
     * The jboss-client.jar file is located in the following path:
     * <install directory>/jboss/bin/client
     *
     * SOAP required JAR files are located in the following path:
     * <install directory>/sdk/client-libs/thirdparty
     *
     * If you want to invoke a remote forms server instance and there is a
     * firewall between the client application and the server, then it is
     * recommended that you use the SOAP mode. When using the SOAP mode,
     * you have to include these additional JAR files
     *
     * For information about the SOAP
     * mode, see "Setting connection properties" in Programming
     * with AEM Forms
     *
     * The following XML represents the DDX document used in this quick start:
     *<?xml version="1.0" encoding="UTF-8"?>
     * <DDX xmlns="https://ns.adobe.com/DDX/1.0/">
     * <PDF result="EncryptLoan.pdf" encryption="userProtect">
     * <PDF source="inDoc" />
     * </PDF>
     * <PasswordEncryptionProfile name="userProtect" compatibilityLevel="Acrobat7">
     * <OpenPassword>AdobeOpen</OpenPassword>
     * </PasswordEncryptionProfile>
     * </DDX>
     */

 import com.adobe.livecycle.assembler.client.*;
 import java.util.*;
 import java.io.File;
 import java.io.FileInputStream;
 import com.adobe.idp.Document;
 import com.adobe.idp.dsc.clientsdk.ServiceClientFactory;
 import com.adobe.idp.dsc.clientsdk.ServiceClientFactoryProperties;

 public class AssembleEncryptedDocumentSOAP
 {
     public static void main(String[] args) {
         try{
             //Set connection properties required to invoke AEM Forms using SOAP mode
             Properties connectionProps = new Properties();
             connectionProps.setProperty(ServiceClientFactoryProperties.DSC_DEFAULT_SOAP_ENDPOINT, "https://[server]:[port]");
             connectionProps.setProperty(ServiceClientFactoryProperties.DSC_TRANSPORT_PROTOCOL,ServiceClientFactoryProperties.DSC_SOAP_PROTOCOL);
             connectionProps.setProperty(ServiceClientFactoryProperties.DSC_SERVER_TYPE, "JBoss");
             connectionProps.setProperty(ServiceClientFactoryProperties.DSC_CREDENTIAL_USERNAME, "administrator");
             connectionProps.setProperty(ServiceClientFactoryProperties.DSC_CREDENTIAL_PASSWORD, "password");

             //Create a ServiceClientFactory instance
             ServiceClientFactory myFactory = ServiceClientFactory.createInstance(connectionProps);

             //Create an AssemblerServiceClient object
             AssemblerServiceClient assemblerClient = new AssemblerServiceClient(myFactory);

             /*
              * Create a FileInputStream object based on an existing DDX file
              * This DDX document contains instructions to encrypt the PDF document
              */
             FileInputStream myDDXFile = new FileInputStream("C:\\shell_Encrypt.xml");

             //Create a Document object based on the DDX file
             Document myDDX = new Document(myDDXFile);

             //Reference an unsecured PDF document
             FileInputStream mySourceLoan = new FileInputStream("C:\\Loan.pdf");

             //Create a Document object based on the Loan.pdf source file
             Document myPDFLoanSource = new Document(mySourceLoan);

             //Create an AssemblerOptionsSpec object
             AssemblerOptionSpec assemblerSpec = new AssemblerOptionSpec();
             assemblerSpec.setFailOnError(false);

             //Submit the job to Assembler service
             Document jobResult = assemblerClient.invokeOneDocument(myDDX,myPDFLoanSource,assemblerSpec);

             //Create the output file
             File myOutFile = new File("C:\\AssemblerEncryptedPDF.pdf");
             jobResult.copyToFile(myOutFile);

         }catch (Exception e) {
             e.printStackTrace();
         }
     }
 }

クイックスタート(SOAP モード):ベイツ番号を使用した PDF ドキュメントを、Java API を使用してアセンブリする

次の Java コードの例では、一意のページ識別子(ベイツナンバリング)を使用して PDF ドキュメントを構築しています。 DDX ドキュメントの名前は shell_Bates.xml です。Assembler サービスから返された PDF ドキュメントは、AssemblerResultBatesPDF.pdf という名前の PDF ファイルとして保存されます。(ベイツナンバリングを使用したドキュメントのアセンブリを参照してください)

 /*
     * This Java Quick Start uses the SOAP mode and contains the following JAR files
     * in the class path:
     * 1. adobe-assembler-client.jar
     * 2. adobe-livecycle-client.jar
     * 3. adobe-usermanager-client.jar
     * 4. adobe-utilities.jar
     * 5. jboss-client.jar (use a different JAR file if the forms server is not deployed
     * on JBoss)
     * 6. activation.jar (required for SOAP mode)
     * 7. axis.jar (required for SOAP mode)
     * 8. commons-codec-1.3.jar (required for SOAP mode)
     * 9.  commons-collections-3.1.jar  (required for SOAP mode)
     * 10. commons-discovery.jar (required for SOAP mode)
     * 11. commons-logging.jar (required for SOAP mode)
     * 12. dom3-xml-apis-2.5.0.jar (required for SOAP mode)
     * 13. jaxen-1.1-beta-9.jar (required for SOAP mode)
     * 14. jaxrpc.jar (required for SOAP mode)
     * 15. log4j.jar (required for SOAP mode)
     * 16. mail.jar (required for SOAP mode)
     * 17. saaj.jar (required for SOAP mode)
     * 18. wsdl4j.jar (required for SOAP mode)
     * 19. xalan.jar (required for SOAP mode)
     * 20. xbean.jar (required for SOAP mode)
     * 21. xercesImpl.jar (required for SOAP mode)
     *
     * These JAR files are located in the following path:
     * <install directory>/sdk/client-libs/common
     *
     * The adobe-utilities.jar file is located in the following path:
     * <install directory>/sdk/client-libs/jboss
     *
     * The jboss-client.jar file is located in the following path:
     * <install directory>/jboss/bin/client
     *
     * SOAP required JAR files are located in the following path:
     * <install directory>/sdk/client-libs/thirdparty
     *
     * If you want to invoke a remote forms server instance and there is a
     * firewall between the client application and the server, then it is
     * recommended that you use the SOAP mode. When using the SOAP mode,
     * you have to include these additional JAR files
     *
     * For information about the SOAP
     * mode, see "Setting connection properties" in Programming
     * with AEM Forms
     *
     * The following XML represents the DDX document used in this quick start:
     * <?xml version="1.0" encoding="UTF-8"?>
     * <DDX xmlns="https://ns.adobe.com/DDX/1.0/">
     * <PDF result="out.pdf">
     * <Header>
     * <Center>
     * <StyledText>
     * <p font-size="20pt"><BatesNumber/></p>
     * </StyledText>
     * </Center>
     * </Header>
     * <PDF source="map.pdf" />
     * <PDF source="directions.pdf" />
     * </PDF>
     * </DDX>
     */

 import com.adobe.livecycle.assembler.client.*;
 import java.util.*;
 import java.io.File;
 import java.io.FileInputStream;
 import com.adobe.idp.Document;
 import com.adobe.idp.dsc.clientsdk.ServiceClientFactory;
 import com.adobe.idp.dsc.clientsdk.ServiceClientFactoryProperties;


 public class AssembleBatesNumberDocumentSOAP
 {
     public static void main(String[] args) {
         try{
             //Set connection properties required to invoke AEM Forms using SOAP mode
             Properties connectionProps = new Properties();
             connectionProps.setProperty(ServiceClientFactoryProperties.DSC_DEFAULT_SOAP_ENDPOINT, "https://[server]:[port]");
             connectionProps.setProperty(ServiceClientFactoryProperties.DSC_TRANSPORT_PROTOCOL,ServiceClientFactoryProperties.DSC_SOAP_PROTOCOL);
             connectionProps.setProperty(ServiceClientFactoryProperties.DSC_SERVER_TYPE, "JBoss");
             connectionProps.setProperty(ServiceClientFactoryProperties.DSC_CREDENTIAL_USERNAME, "administrator");
             connectionProps.setProperty(ServiceClientFactoryProperties.DSC_CREDENTIAL_PASSWORD, "password");

             //Create a ServiceClientFactory instance
             ServiceClientFactory myFactory = ServiceClientFactory.createInstance(connectionProps);

             //Create an AssemblerServiceClient object
             AssemblerServiceClient assemblerClient = new AssemblerServiceClient(myFactory);

             //Create a FileInputStream object based on an existing DDX file
             FileInputStream myDDXFile = new FileInputStream("C:\\shell_Bates.xml");

             //Create a Document object based on the DDX file
             Document myDDX = new Document(myDDXFile);

             //Create a Map object to store PDF source documents
             Map<String, Object> inputs = new HashMap<String, Object>();
             FileInputStream mySourceMap = new FileInputStream("C:\\Adobe\map.pdf");
             FileInputStream mySourceOptions = new FileInputStream("C:\\Adobe\directions.pdf");

             //Create a Document object based on the map.pdf source file
             Document myPDFMapSource = new Document(mySourceMap);

             //Create a Document object based on the directions.pdf source file
             Document myPDFOptionsSource = new Document(mySourceOptions);

             //Place two entries into the Map object
             inputs.put("map.pdf",myPDFMapSource);
             inputs.put("directions.pdf",myPDFOptionsSource);

             //Create an AssemblerOptionsSpec object
             AssemblerOptionSpec assemblerSpec = new AssemblerOptionSpec();
             assemblerSpec.setFailOnError(false);

             //Set the initial number to 100
             assemblerSpec.setFirstBatesNumber(100);

             //Submit the job to Assembler service
             AssemblerResult jobResult = assemblerClient.invokeDDX(myDDX,inputs,assemblerSpec);
             java.util.Map allDocs = jobResult.getDocuments();

             //Retrieve the result PDF document from the Map object
             Document outDoc = null;

             //Iterate through the map object to retrieve the result PDF document
             for (Iterator i = allDocs.entrySet().iterator(); i.hasNext();) {
                 // Retrieve the Map object’s value
                 Map.Entry e = (Map.Entry)i.next();

                 //Get the key name as specified in the
                 //DDX document
                 String keyName = (String)e.getKey();
                 if (keyName.equalsIgnoreCase("out.pdf"))
                 {
                     //Cast the Object to a Document
                     Object o = e.getValue();
                     outDoc = (Document)o;

                     //Create the output file
                     File myOutFile = new File("C:\\AssemblerResultBatesPDF.pdf");
                     outDoc.copyToFile(myOutFile);
                 }
             }
             System.out.println("The PDF that contains Bates numbering was assembled.");
         }catch (Exception e) {
             e.printStackTrace();
         }
     }
 }

クイックスタート(SOAP モード):Java API を使用した PDF ドキュメントのアセンブリ

次の Java コードの例では、非インタラクティブ PDF ドキュメントをアセンブリします。Assembler サービスに渡されるインタラクティブ PDF ドキュメントの名前は Loan.pdf です。DDX ドキュメントの名前は shell_XFA.xml です。非インタラクティブ PDF ドキュメントは AssembleNonInteractivePDF.pdf という名前の PDF ファイルとして保存されます。(非インタラクティブ PDF ドキュメントのアセンブリを参照してください)

 /*
     * This Java Quick Start uses the SOAP mode and contains the following JAR files
     * in the class path:
     * 1. adobe-assembler-client.jar
     * 2. adobe-livecycle-client.jar
     * 3. adobe-usermanager-client.jar
     * 4. adobe-utilities.jar
     * 5. jboss-client.jar (use a different JAR file if the forms server is not deployed
     * on JBoss)
     * 6. activation.jar (required for SOAP mode)
     * 7. axis.jar (required for SOAP mode)
     * 8. commons-codec-1.3.jar (required for SOAP mode)
     * 9.  commons-collections-3.1.jar  (required for SOAP mode)
     * 10. commons-discovery.jar (required for SOAP mode)
     * 11. commons-logging.jar (required for SOAP mode)
     * 12. dom3-xml-apis-2.5.0.jar (required for SOAP mode)
     * 13. jaxen-1.1-beta-9.jar (required for SOAP mode)
     * 14. jaxrpc.jar (required for SOAP mode)
     * 15. log4j.jar (required for SOAP mode)
     * 16. mail.jar (required for SOAP mode)
     * 17. saaj.jar (required for SOAP mode)
     * 18. wsdl4j.jar (required for SOAP mode)
     * 19. xalan.jar (required for SOAP mode)
     * 20. xbean.jar (required for SOAP mode)
     * 21. xercesImpl.jar (required for SOAP mode)
     *
     * These JAR files are located in the following path:
     * <install directory>/sdk/client-libs/common
     *
     * The adobe-utilities.jar file is located in the following path:
     * <install directory>/sdk/client-libs/jboss
     *
     * The jboss-client.jar file is located in the following path:
     * <install directory>/jboss/bin/client
     *
     * SOAP required JAR files are located in the following path:
     * <install directory>/sdk/client-libs/thirdparty
     *
     * If you want to invoke a remote forms server instance and there is a
     * firewall between the client application and the server, then it is
     * recommended that you use the SOAP mode. When using the SOAP mode,
     * you have to include these additional JAR files
     *
     * For information about the SOAP
     * mode, see "Setting connection properties" in Programming
     * with AEM Forms
     *
     * The following XML represents the DDX document used in this quick start:
     * <?xml version="1.0" encoding="UTF-8"?>
     * <DDX xmlns="https://ns.adobe.com/DDX/1.0/">
     * <PDF result="out.pdf">
     * <PDF source="inDoc"/>
     * <NoXFA/>
     * </PDF>
     * </DDX>
     */
 import com.adobe.livecycle.assembler.client.*;
 import java.util.*;
 import java.io.File;
 import java.io.FileInputStream;
 import com.adobe.idp.Document;
 import com.adobe.idp.dsc.clientsdk.ServiceClientFactory;
 import com.adobe.idp.dsc.clientsdk.ServiceClientFactoryProperties;

 public class AssembleNonInteractiveSOAP
 {
     public static void main(String[] args) {
         try{
             //Set connection properties required to invoke AEM Forms
             Properties connectionProps = new Properties();
             connectionProps.setProperty(ServiceClientFactoryProperties.DSC_DEFAULT_SOAP_ENDPOINT, "https://[server]:[port]");
             connectionProps.setProperty(ServiceClientFactoryProperties.DSC_TRANSPORT_PROTOCOL,ServiceClientFactoryProperties.DSC_SOAP_PROTOCOL);
             connectionProps.setProperty(ServiceClientFactoryProperties.DSC_SERVER_TYPE, "JBoss");
             connectionProps.setProperty(ServiceClientFactoryProperties.DSC_CREDENTIAL_USERNAME, "administrator");
             connectionProps.setProperty(ServiceClientFactoryProperties.DSC_CREDENTIAL_PASSWORD, "password");

             //Create a ServiceClientFactory instance
             ServiceClientFactory myFactory = ServiceClientFactory.createInstance(connectionProps);

             //Create an AssemblerServiceClient object
             AssemblerServiceClient assemblerClient = new AssemblerServiceClient(myFactory);

             /*
              * Create a FileInputStream object based on an existing DDX file
              * This DDX document contains instructions to create
              * a non-interactive PDF document
              */
             FileInputStream myDDXFile = new FileInputStream("C:\\shell_XFA.xml");

             //Create a Document object based on the DDX file
             Document myDDX = new Document(myDDXFile);

             //Reference an interactive PDF document
             FileInputStream mySourceLoan = new FileInputStream("C:\\Adobe\Loan.pdf");

             //Create a Document object based on the Loan.pdf source file
             Document myPDFLoanSource = new Document(mySourceLoan);

             //Create an AssemblerOptionsSpec object
             AssemblerOptionSpec assemblerSpec = new AssemblerOptionSpec();
             assemblerSpec.setFailOnError(false);

             //Submit the job to Assembler service and get back a
             //non-interactive PDF document
             Document outDoc = assemblerClient.invokeOneDocument(myDDX,myPDFLoanSource,assemblerSpec);

             //Save the non-interactive PDF document
             File myOutFile = new File("C:\\AssembleNonInteractivePDF.pdf");
             outDoc.copyToFile(myOutFile);

         }catch (Exception e) {
             e.printStackTrace();
         }
     }
 }


クイックスタート(SOAP モード):Java API を使用したドキュメントの PDF/A 準拠の確認

次の Java コードの例では、入力 PDF ドキュメントが PDF/A に準拠しているかどうかを判断します。 Assembler サービスに渡される入力 PDF ドキュメントには、Loan.pdf という名前が付けられます。DDX ドキュメントの名前は shell_PDFA.xml です。 Assembler サービスから返され、入力 PDF ドキュメントが PDF/A に準拠しているかどうかを指定する XML ドキュメントは、result.xml という名前の XML ファイルとして保存されます。このコードの例で使用されている shell_PDFA.xml DDX ドキュメントについて詳しくは、ドキュメントが PDF/A に準拠しているかどうかの検証を参照してください。

 /*
     * This Java Quick Start uses the SOAP mode and contains the following JAR files
     * in the class path:
     * 1. adobe-assembler-client.jar
     * 2. adobe-livecycle-client.jar
     * 3. adobe-usermanager-client.jar
     * 4. adobe-utilities.jar
     * 5. jboss-client.jar (use a different JAR file if the forms server is not deployed
     * on JBoss)
     * 6. activation.jar (required for SOAP mode)
     * 7. axis.jar (required for SOAP mode)
     * 8. commons-codec-1.3.jar (required for SOAP mode)
     * 9.  commons-collections-3.1.jar  (required for SOAP mode)
     * 10. commons-discovery.jar (required for SOAP mode)
     * 11. commons-logging.jar (required for SOAP mode)
     * 12. dom3-xml-apis-2.5.0.jar (required for SOAP mode)
     * 13. jaxen-1.1-beta-9.jar (required for SOAP mode)
     * 14. jaxrpc.jar (required for SOAP mode)
     * 15. log4j.jar (required for SOAP mode)
     * 16. mail.jar (required for SOAP mode)
     * 17. saaj.jar (required for SOAP mode)
     * 18. wsdl4j.jar (required for SOAP mode)
     * 19. xalan.jar (required for SOAP mode)
     * 20. xbean.jar (required for SOAP mode)
     * 21. xercesImpl.jar (required for SOAP mode)
     *
     * These JAR files are located in the following path:
     * <install directory>/sdk/client-libs/common
     *
     * The adobe-utilities.jar file is located in the following path:
     * <install directory>/sdk/client-libs/jboss
     *
     * The jboss-client.jar file is located in the following path:
     * <install directory>/jboss/bin/client
     *
     * SOAP required JAR files are located in the following path:
     * <install directory>/sdk/client-libs/thirdparty
     *
     * If you want to invoke a remote forms server instance and there is a
     * firewall between the client application and the server, then it is
     * recommended that you use the SOAP mode. When using the SOAP mode,
     * you have to include these additional JAR files
     *
     * For information about the SOAP
     * mode, see "Setting connection properties" in Programming
     * with AEM Forms
     *
     * This quick start validates the following DDX document:
     *<?xml version="1.0" encoding="UTF-8"?>
     *<DDX xmlns="https://ns.adobe.com/DDX/1.0/">
     * <DocumentInformation source="Loan.pdf" result="Loan_result.xml">
     * <PDFAValidation compliance="PDF/A-1b" resultLevel="Detailed" ignoreUnusedResources="true" allowCertificationSignatures="true" />
     * </DocumentInformation>
     *</DDX>
     */

 import com.adobe.livecycle.assembler.client.*;
 import java.util.*;
 import java.io.File;
 import java.io.FileInputStream;
 import com.adobe.idp.Document;
 import com.adobe.idp.dsc.clientsdk.ServiceClientFactory;
 import com.adobe.idp.dsc.clientsdk.ServiceClientFactoryProperties;

 public class AssembleDeterminePDFASOAP
 {
     public static void main(String[] args) {
         try{
             //Set connection properties required to invoke AEM Forms using SOAP mode
             Properties connectionProps = new Properties();
             connectionProps.setProperty(ServiceClientFactoryProperties.DSC_DEFAULT_SOAP_ENDPOINT, "https://[server]:[port]");
             connectionProps.setProperty(ServiceClientFactoryProperties.DSC_TRANSPORT_PROTOCOL,ServiceClientFactoryProperties.DSC_SOAP_PROTOCOL);
             connectionProps.setProperty(ServiceClientFactoryProperties.DSC_SERVER_TYPE, "JBoss");
             connectionProps.setProperty(ServiceClientFactoryProperties.DSC_CREDENTIAL_USERNAME, "administrator");
             connectionProps.setProperty(ServiceClientFactoryProperties.DSC_CREDENTIAL_PASSWORD, "password");

             //Create a ServiceClientFactory instance
             ServiceClientFactory myFactory = ServiceClientFactory.createInstance(connectionProps);

             //Create an AssemblerServiceClient object
             AssemblerServiceClient assemblerClient = new AssemblerServiceClient(myFactory);

             //Create a FileInputStream object based on an existing DDX file
             FileInputStream myDDXFile = new FileInputStream("C:\\shell_PDFA.xml");

             //Create a Document object based on the DDX file
             Document myDDX = new Document(myDDXFile);

             //Create a Map object to store PDF source documents
             Map inputs = new HashMap();
             FileInputStream mySourceMap = new FileInputStream("C:\\Adobe\Loan.pdf");

             //Create a Document object based on the map.pdf source file
             Document myPDFMapSource = new Document(mySourceMap);

             //Place two entries into the Map object
             inputs.put("Loan.pdf",myPDFMapSource);

             //Create an AssemblerOptionsSpec object
             AssemblerOptionSpec assemblerSpec = new AssemblerOptionSpec();
             assemblerSpec.setFailOnError(false);

             //Submit the job to Assembler service
             AssemblerResult jobResult = assemblerClient.invokeDDX(myDDX,inputs,assemblerSpec);
             java.util.Map allDocs = jobResult.getDocuments();

             //Retrieve the result PDF document from the Map object
             Document outDoc = null;

             //Iterate through the map object to retrieve the result XML
             //document that specifies if the input document is
             //PDF/A compliant
             for (Iterator i = allDocs.entrySet().iterator(); i.hasNext();) {
                 // Retrieve the Map object’s value
                 Map.Entry e = (Map.Entry)i.next();

                 //Get the key name as specified in the
                 //DDX document
                 String keyName = (String)e.getKey();
                 if (keyName.equalsIgnoreCase("Loan_result.xml"))
                 {
                     //Get the element value
                     Object o = e.getValue();

                     //Cast the Object to a Document
                     outDoc = (Document)o;

                     //Save the XML file
                     File myMXLFile = new File("C:\\Adobe\result.xml");
                     outDoc.copyToFile(myMXLFile);
                      }
                 }

             System.out.println("The results are written to result.xml.");
         }catch (Exception e) {
             e.printStackTrace();
         }
     }
 }

クイックスタート(SOAP モード):Java API を使用した DDX ドキュメントの検証

次の Java コードの例では、bookmarkDDX.xml という名前のファイルに基づいて DDX ドキュメントを検証します。(DDX ドキュメントの検証を参照してください)

 /*
     * This Java Quick Start uses the SOAP mode and contains the following JAR files
     * in the class path:
     * 1. adobe-assembler-client.jar
     * 2. adobe-livecycle-client.jar
     * 3. adobe-usermanager-client.jar
     * 4. adobe-utilities.jar
     * 5. jboss-client.jar (use a different JAR file if the forms server is not deployed
     * on JBoss)
     * 6. activation.jar (required for SOAP mode)
     * 7. axis.jar (required for SOAP mode)
     * 8. commons-codec-1.3.jar (required for SOAP mode)
     * 9.  commons-collections-3.1.jar  (required for SOAP mode)
     * 10. commons-discovery.jar (required for SOAP mode)
     * 11. commons-logging.jar (required for SOAP mode)
     * 12. dom3-xml-apis-2.5.0.jar (required for SOAP mode)
     * 13. jaxen-1.1-beta-9.jar (required for SOAP mode)
     * 14. jaxrpc.jar (required for SOAP mode)
     * 15. log4j.jar (required for SOAP mode)
     * 16. mail.jar (required for SOAP mode)
     * 17. saaj.jar (required for SOAP mode)
     * 18. wsdl4j.jar (required for SOAP mode)
     * 19. xalan.jar (required for SOAP mode)
     * 20. xbean.jar (required for SOAP mode)
     * 21. xercesImpl.jar (required for SOAP mode)
     *
     * These JAR files are located in the following path:
     * <install directory>/sdk/client-libs/common
     *
     * The adobe-utilities.jar file is located in the following path:
     * <install directory>/sdk/client-libs/jboss
     *
     * The jboss-client.jar file is located in the following path:
     * <install directory>/jboss/bin/client
     *
     * SOAP required JAR files are located in the following path:
     * <install directory>/sdk/client-libs/thirdparty
     *
     * If you want to invoke a remote forms server instance and there is a
     * firewall between the client application and the server, then it is
     * recommended that you use the SOAP mode. When using the SOAP mode,
     * you have to include these additional JAR files
     *
     * For information about the SOAP
     * mode, see "Setting connection properties" in Programming
     * with AEM Forms
     *
     * This quick start validates the following DDX document:
     *&<?xml version="1.0" encoding="UTF-8"?>
     * <DDX xmlns="https://ns.adobe.com/DDX/1.0/">
     * <PDF result="out.pdf">
     * <PDF source="map.pdf" />
     * <PDF source="directions.pdf" />
     * </PDF>
     * </DDX>
     */
 import com.adobe.livecycle.assembler.client.*;
 import java.util.*;
 import java.io.File;
 import java.io.FileInputStream;
 import com.adobe.idp.Document;
 import com.adobe.idp.dsc.clientsdk.ServiceClientFactory;
 import com.adobe.idp.dsc.clientsdk.ServiceClientFactoryProperties;

 public class ValidateDDXSOAP
 {
     public static void main(String[] args) {

         boolean isValid = false;
            Document outLog = null;

         try{
             //Set connection properties required to invoke AEM Forms
             Properties connectionProps = new Properties();
             connectionProps.setProperty(ServiceClientFactoryProperties.DSC_DEFAULT_SOAP_ENDPOINT, "https://[server]:[port]");
             connectionProps.setProperty(ServiceClientFactoryProperties.DSC_TRANSPORT_PROTOCOL,ServiceClientFactoryProperties.DSC_SOAP_PROTOCOL);
             connectionProps.setProperty(ServiceClientFactoryProperties.DSC_SERVER_TYPE, "JBoss");
             connectionProps.setProperty(ServiceClientFactoryProperties.DSC_CREDENTIAL_USERNAME, "administrator");
             connectionProps.setProperty(ServiceClientFactoryProperties.DSC_CREDENTIAL_PASSWORD, "password");

             //Create a ServiceClientFactory instance
             ServiceClientFactory myFactory = ServiceClientFactory.createInstance(connectionProps);

             //Create an AssemblerServiceClient object
             AssemblerServiceClient assemblerClient = new AssemblerServiceClient(myFactory);

             //Create a FileInputStream object based on an existing DDX file
             FileInputStream myDDXFile = new FileInputStream("C:\\bookmarkDDX.xml");

             //Create a Document object based on the DDX file
             Document myDDX = new Document(myDDXFile);

             //Create an AssemblerOptionsSpec object
             AssemblerOptionSpec assemblerSpec = new AssemblerOptionSpec();
             assemblerSpec.setValidateOnly(true);
             assemblerSpec.setLogLevel("FINE");
             assemblerSpec.setFailOnError(false);

             //Validate the DDX document
             AssemblerResult jobResult = assemblerClient.invokeDDX(myDDX,null,assemblerSpec);
             outLog = jobResult.getJobLog();
             isValid = true;

         }catch (Exception e) {
              if (e instanceof OperationException) {
                     OperationException oe = (OperationException) e;
                     outLog = oe.getJobLog();
                     File myOutFile = new File("C:\\test.xml");
                     outLog.copyToFile(myOutFile);
                 }
              e.printStackTrace();
          } finally {
                if (outLog != null) {
                    File myOutFile = new File("C:\\test.xml");
                    outLog.copyToFile(myOutFile);
               }
           if (isValid) {
                 // do something
           } else {
                // do something else
              }
           }
     }
 }

クイックスタート(SOAP モード):Java API を使用した、ブックマークを含む PDF ドキュメントのアセンブリ

次の Java コードの例では、ブックマークがある PDF ドキュメントを構築します。 DDX ドキュメントの名前は bookmarkDDX.xml です。 PDF ドキュメントに追加するブックマークを表すブックマーク XML ドキュメントの名前は bookmarks.xml です。 生成される PDF ドキュメントは、AssemblerResultBookmarks.pdf という名前の PDF ファイルとして保存されます。(ブックマークを使用した PDF ドキュメントのアセンブリを参照してください)

 /*
     * This Java Quick Start uses the SOAP mode and contains the following JAR files
     * in the class path:
     * 1. adobe-assembler-client.jar
     * 2. adobe-livecycle-client.jar
     * 3. adobe-usermanager-client.jar
     * 4. adobe-utilities.jar
     * 5. jboss-client.jar (use a different JAR file if the forms server is not deployed
     * on JBoss)
     * 6. activation.jar (required for SOAP mode)
     * 7. axis.jar (required for SOAP mode)
     * 8. commons-codec-1.3.jar (required for SOAP mode)
     * 9.  commons-collections-3.1.jar  (required for SOAP mode)
     * 10. commons-discovery.jar (required for SOAP mode)
     * 11. commons-logging.jar (required for SOAP mode)
     * 12. dom3-xml-apis-2.5.0.jar (required for SOAP mode)
     * 13. jaxen-1.1-beta-9.jar (required for SOAP mode)
     * 14. jaxrpc.jar (required for SOAP mode)
     * 15. log4j.jar (required for SOAP mode)
     * 16. mail.jar (required for SOAP mode)
     * 17. saaj.jar (required for SOAP mode)
     * 18. wsdl4j.jar (required for SOAP mode)
     * 19. xalan.jar (required for SOAP mode)
     * 20. xbean.jar (required for SOAP mode)
     * 21. xercesImpl.jar (required for SOAP mode)
     *
     * These JAR files are located in the following path:
     * <install directory>/sdk/client-libs/common
     *
     * The adobe-utilities.jar file is located in the following path:
     * <install directory>/sdk/client-libs/jboss
     *
     * The jboss-client.jar file is located in the following path:
     * <install directory>/jboss/bin/client
     *
     * SOAP required JAR files are located in the following path:
     * <install directory>/sdk/client-libs/thirdparty
     *
     * If you want to invoke a remote forms server instance and there is a
     * firewall between the client application and the server, then it is
     * recommended that you use the SOAP mode. When using the SOAP mode,
     * you have to include these additional JAR files
     *
     * For information about the SOAP
     * mode, see "Setting connection properties" in Programming
     * with AEM Forms
     *
     * * This quick start uses the following DDX document:
     * <?xml version="1.0" encoding="UTF-8"?>
     * <DDX xmlns="https://ns.adobe.com/DDX/1.0/">
     * <PDF result="FinalDoc.pdf">
     * <PDF source="Loan.pdf">
     * <Bookmarks source="doc2" />
     * </PDF>
     * </PDF>
     * </DDX>
     *
     * This quick start also uses the following bookmarks XML
     * to assemble a PDF document containing bookmarks:
     * <?xml version="1.0" encoding="UTF-8"?>
     * <Bookmarks xmlns="https://ns.adobe.com/pdf/bookmarks" version="1.0">
     * <Bookmark>
     * <Action>
     * <Launch NewWindow="true">
     * <File Name="C:\Adobe\LoanDetails.pdf" />
     * </Launch>
     * </Action>
     * <Title>Open the Loan document</Title>
     * </Bookmark>
     * <Bookmark>
     * <Action>
     * <Launch>
     * <Win Name="C:\WINDOWS\notepad.exe" />
     * </Launch>
     * </Action>
     * <Title>Launch NotePad</Title>
     * </Bookmark>
     * </Bookmarks>
     *
     */
     import com.adobe.livecycle.assembler.client.*;
 import java.util.*;
 import java.io.File;
 import java.io.FileInputStream;
 import com.adobe.idp.Document;
 import com.adobe.idp.dsc.clientsdk.ServiceClientFactory;
 import com.adobe.idp.dsc.clientsdk.ServiceClientFactoryProperties;

 public class AssembleBookmarksSOAP
 {
     public static void main(String[] args) {
         try{
             //Set connection properties required to invoke AEM Forms using SOAP mode
             Properties connectionProps = new Properties();
             connectionProps.setProperty(ServiceClientFactoryProperties.DSC_DEFAULT_SOAP_ENDPOINT, "https://[server]:[port]");
             connectionProps.setProperty(ServiceClientFactoryProperties.DSC_TRANSPORT_PROTOCOL,ServiceClientFactoryProperties.DSC_SOAP_PROTOCOL);
             connectionProps.setProperty(ServiceClientFactoryProperties.DSC_SERVER_TYPE, "JBoss");
             connectionProps.setProperty(ServiceClientFactoryProperties.DSC_CREDENTIAL_USERNAME, "administrator");
             connectionProps.setProperty(ServiceClientFactoryProperties.DSC_CREDENTIAL_PASSWORD, "password");

             //Create a ServiceClientFactory instance
             ServiceClientFactory myFactory = ServiceClientFactory.createInstance(connectionProps);

             //Create an AssemblerServiceClient object
             AssemblerServiceClient assemblerClient = new AssemblerServiceClient(myFactory);

             //Create a FileInputStream object based on an existing DDX file
             FileInputStream myDDXFile = new FileInputStream("C:\\bookmarkDDX.xml");

             //Create a Document object based on the DDX file
             Document myDDX = new Document(myDDXFile);

             //Create a Map object to store an input PDF document and a Bookmark
             //XML document
             Map inputs = new HashMap();
             FileInputStream mySourceMap = new FileInputStream("C:\\Loan.pdf");
             FileInputStream bookmarkInfo = new FileInputStream("C:\\bookmarks.xml");

             //Create a Document object based on the Loan.pdf source file
             Document myPDFMapSource = new Document(mySourceMap);

             //Create a Document object based on the bookmarks.xml file
             Document myBookmarkXML= new Document(bookmarkInfo);

             //Place two entries into the Map object
             inputs.put("Loan.pdf",myPDFMapSource);
             inputs.put("doc2",myBookmarkXML);

             //Create an AssemblerOptionsSpec object
             AssemblerOptionSpec assemblerSpec = new AssemblerOptionSpec();
             assemblerSpec.setFailOnError(false);

             //Submit the job to Assembler service
             AssemblerResult jobResult = assemblerClient.invokeDDX(myDDX,inputs,assemblerSpec);
             java.util.Map allDocs = jobResult.getDocuments();

             //Retrieve the result PDF document from the Map object
             Document outDoc = null;

             //Iterate through the map object to retrieve the result PDF document
             for (Iterator i = allDocs.entrySet().iterator(); i.hasNext();) {
                 // Retrieve the Map object’s value
                 Map.Entry e = (Map.Entry)i.next();

                 //Get the key name as specified in the
                 //DDX document
                 String keyName = (String)e.getKey();
                 if (keyName.equalsIgnoreCase("FinalDoc.pdf"))
                 {
                     Object o = e.getValue();
                     outDoc = (Document)o;

                     //Save the result PDF file
                     File myOutFile = new File("C:\\Adobe\Assembler\Output\AssemblerResultBookmarks.pdf");
                     outDoc.copyToFile(myOutFile);
                 }
             }
         }catch (Exception e) {
             e.printStackTrace();
         }
     }
 }

クイックスタート(SOAP モード):Java API を使用した DDX ドキュメントの動的な作成

次の Java コードの例では、PDF ドキュメントを分割する DDX ドキュメントを動的に作成します。新しい PDF ドキュメントは、入力 PDF ドキュメントのレベル 1 のブックマークごとに作成されます。 このコードの例には、次の 2 つのユーザー定義メソッドがあります。

  • createDDX:Assembler サービスに送信される DDX ドキュメントを表す org.w3c.dom.Document オブジェクトを作成します。このユーザー定義メソッドは、org.w3c.dom.Document オブジェクトを返します。

  • convertDDXorg.w3c.dom.Document オブジェクトを com.adobe.idp.Document オブジェクトに変換します。このメソッドは、入力パラメーターとして org.w3c.dom.Document オブジェクトを受け入れ、com.adobe.idp.Document オブジェクトを返します。

    このクイックスタートでは、これらの両方のメソッドが呼び出されます。 (DDX ドキュメントの動的な作成を参照。)
    ``

/*
 * This Java Quick Start uses the SOAP mode and contains the following JAR files
 * in the class path:
 * 1. adobe-assembler-client.jar
 * 2. adobe-livecycle-client.jar
 * 3. adobe-usermanager-client.jar
 * 4. adobe-utilities.jar
 * 5. jboss-client.jar (use a different JAR file if the forms server is not deployed
 * on JBoss)
 * 6. activation.jar (required for SOAP mode)
 * 7. axis.jar (required for SOAP mode)
 * 8. commons-codec-1.3.jar (required for SOAP mode)
 * 9. commons-collections-3.1.jar (required for SOAP mode)
 * 10. commons-discovery.jar (required for SOAP mode)
 * 11. commons-logging.jar (required for SOAP mode)
 * 12. dom3-xml-apis-2.5.0.jar (required for SOAP mode)
 * 13. jaxen-1.1-beta-9.jar (required for SOAP mode)
 * 14. jaxrpc.jar (required for SOAP mode)
 * 15. log4j.jar (required for SOAP mode)
 * 16. mail.jar (required for SOAP mode)
 * 17. saaj.jar (required for SOAP mode)
 * 18. wsdl4j.jar (required for SOAP mode)
 * 19. xalan.jar (required for SOAP mode)
 * 20. xbean.jar (required for SOAP mode)
 * 21. xercesImpl.jar (required for SOAP mode)
 *
 * These JAR files are located in the following path:
 * <install directory>/sdk/client-libs/common
 *
 * The adobe-utilities.jar file is located in the following path:
 * <install directory>/sdk/client-libs/jboss
 *
 * The jboss-client.jar file is located in the following path:
 * <install directory>/jboss/bin/client
 *
 * SOAP required JAR files are located in the following path:
 * <install directory>/sdk/client-libs/thirdparty
 *
 * If you want to invoke a remote forms server instance and there is a
 * firewall between the client application and the server, then it is
 * recommended that you use the SOAP mode. When using the SOAP mode,
 * you have to include these additional JAR files
 *
 * For information about the SOAP
 * mode, see "Setting connection properties" in Programming
 * with AEM Forms
 *
 * The following XML represents the DDX document created in this quick start:
 * <?xml version="1.0" encoding="UTF-8"?>
 * <DDX xmlns="https://ns.adobe.com/DDX/1.0/">
 * <PDF result="out.pdf">
 * <PDF source="inDoc"/>
 * <NoXFA/>
 * </PDF>
 * </DDX>
 */
import com.adobe.livecycle.assembler.client.*;
import java.util.*;
import java.io.ByteArrayOutputStream;
import java.io.File;
import java.io.FileInputStream;
import javax.xml.parsers.DocumentBuilder;
import javax.xml.parsers.DocumentBuilderFactory;
import javax.xml.transform.Transformer;
import javax.xml.transform.TransformerFactory;
import javax.xml.transform.dom.DOMSource;
import javax.xml.transform.stream.StreamResult;
import org.w3c.dom.Element;
import com.adobe.idp.Document;
import com.adobe.idp.dsc.clientsdk.ServiceClientFactory;
import com.adobe.idp.dsc.clientsdk.ServiceClientFactoryProperties;
public class AssemblePDFWithDynamicDDXSOAP {
 public static void main(String[] args) {
   try {
    //Set connection properties required to invoke AEM Forms using SOAP mode
    Properties connectionProps = new Properties();
    connectionProps.setProperty(ServiceClientFactoryProperties.DSC_DEFAULT_SOAP_ENDPOINT,
     "https://[server]:[port]");
    connectionProps.setProperty(ServiceClientFactoryProperties.DSC_TRANSPORT_PROTOCOL, ServiceCl ientFactoryProperties.DSC_SOAP_PROTOCOL);
    connectionProps.setProperty(ServiceClientFactoryProperties.DSC_SERVER_TYPE,
     "JBoss");
    connectionProps.setProperty(ServiceClientFactoryProperties.DSC_CREDENTIAL_USERNAME,
     "administrator");
    connectionProps.setProperty(ServiceClientFactoryProperties.DSC_CREDENTIAL_PASSWORD,
     "password");
    //Create a ServiceClientFactory instance
    ServiceClientFactory myFactory =
     ServiceClientFactory.createInstance(connectionProps);
    //Create an AssemblerServiceClient object
    AssemblerServiceClient assemblerClient = new AssemblerServiceClient(myFactory);
    //Dynamically create a DDX document
    org.w3c.dom.Document myDDX = createDDX();
    //Covert the DDX document to a com.adobe.idp.Document instance
    com.adobe.idp.Document ddx = convertDDX(myDDX);
    //Create a Map object to store PDF source documents
    Map inputs = new HashMap();
    FileInputStream mySourceMap = new FileInputStream("C:\\AssemblerResultPDF.pdf");
    //Create a Document object based on the map.pdf source file
    Document myPDFSource = new Document(mySourceMap);
    //Place the entry into the Map object
    inputs.put("AssemblerResultPDF.pdf", myPDFSource);
    //Create an AssemblerOptionsSpec object
    AssemblerOptionSpec assemblerSpec = new AssemblerOptionSpec();
    assemblerSpec.setFailOnError(false);
    //Submit the job to Assembler service and use the dynamically created DDX document
    AssemblerResult jobResult = assemblerClient.invokeDDX(ddx, inputs, assemblerSpec);
    java.util.Map allDocs = jobResult.getDocuments();
    //Retrieve the result PDF document from the Map object
    Document outDoc = null;
    int index = 1;
    //Iterate through the map object to retrieve the result PDF documents
    for (Iterator i = allDocs.entrySet().iterator(); i.hasNext();) {
     // Retrieve the Map object's value
     Map.Entry e = (Map.Entry) i.next();
     Object o = e.getValue();
     //Cast the Object to a Document
     //and save to a file
     outDoc = (Document) o;
     File myOutFile = new File("C:\\ResultPDF" + index + ".pdf");
     outDoc.copyToFile(myOutFile);
     index++;
    }
   } catch (Exception e) {
    e.printStackTrace();
   }
  }
  //Creates a DDX document using an org.w3c.dom.Document object
 private static org.w3c.dom.Document createDDX() {
   org.w3c.dom.Document document = null;
   try {
    //Create DocumentBuilderFactory and DocumentBuilder objects
    DocumentBuilderFactory factory = DocumentBuilderFactory.newInstance();
    DocumentBuilder builder = factory.newDocumentBuilder();
    //Create a new Document object
    document = builder.newDocument();
    //Create the root element and append it to the XML DOM
    Element root = (Element) document.createElement("DDX");
    root.setAttribute("xmlns", "https://ns.adobe.com/DDX/1.0/");
    document.appendChild(root);
    //Create the PDFsFromBookmarks element
    Element PDFsFromBookmarks =
     (Element) document.createElement("PDFsFromBookmarks");
    PDFsFromBookmarks.setAttribute("prefix", "stmt");
    root.appendChild(PDFsFromBookmarks);
    //Create the PDF element
    Element PDF = (Element) document.createElement("PDF");
    PDF.setAttribute("source", "AssemblerResultPDF.pdf");
    PDFsFromBookmarks.appendChild(PDF);
   } catch (Exception e) {
    System.out.println("The following exception occurred: " + e.getMessage());
   }
   return document;
  }
  //Converts an org.w3c.dom.Document object to a
  //com.adobe.idp.Document object
 private static Document convertDDX(org.w3c.dom.Document myDOM) {
  byte[] mybytes = null;
  try {
   //Create a Java Transformer object
   TransformerFactory transFact = TransformerFactory.newInstance();
   Transformer transForm = transFact.newTransformer();
   //Create a Java ByteArrayOutputStream object
   ByteArrayOutputStream myOutStream = new ByteArrayOutputStream();
   //Create a Java Source object
   javax.xml.transform.dom.DOMSource myInput = new DOMSource(myDOM);
   //Create a Java Result object
   javax.xml.transform.stream.StreamResult myOutput = new StreamResult(myOutStream);
   //Populate the Java ByteArrayOutputStream object
   transForm.transform(myInput, myOutput);
   // Get the size of the ByteArrayOutputStream buffer
   int myByteSize = myOutStream.size();
   //Allocate myByteSize to the byte array
   mybytes = new byte[myByteSize];
   //Copy the content to the byte array
   mybytes = myOutStream.toByteArray();
  } catch (Exception e) {
   System.out.println("The following exception occurred: " + e.getMessage());
  }
  //Create a com.adobe.idp.Document object and copy the
  //contents of the byte array
  Document myDocument = new Document(mybytes);
  return myDocument;
 }
}

クイックスタート(SOAP モード):Java API を使用した PDF ポートフォリオのアセンブリ

次の Java コードの例は、PDF ポートフォリオを作成します。 PDF ポートフォリオは、AssemblerResultPortfolio.pdf という名前の PDF ファイルとして保存されます。(PDF ポートフォリオのアセンブリを参照。)

 /*
     * This Java Quick Start uses the SOAP mode and contains the following JAR files
     * in the class path:
     * 1. adobe-assembler-client.jar
     * 2. adobe-livecycle-client.jar
     * 3. adobe-usermanager-client.jar
     * 4. adobe-utilities.jar
     * 5. jboss-client.jar (use a different JAR file if the forms server is not deployed
     * on JBoss)
     *
     * These JAR files are located in the following path:
     * <install directory>/sdk/client-libs/common
     *
     * The adobe-utilities.jar file is located in the following path:
     * <install directory>/sdk/client-libs/jboss
     *
     * The jboss-client.jar file is located in the following path:
     * <install directory>/jboss/bin/client
     *
     * SOAP required JAR files are located in the following path:
     * <install directory>/sdk/client-libs/thirdparty
     *
     * If you want to invoke a remote forms server instance and there is a
     * firewall between the client application and the server, then it is
     * recommended that you use the SOAP mode. When using the SOAP mode,
     * you have to include these additional JAR files
     *
     * For information about the SOAP
     * mode, see "Setting connection properties" in Programming
     * with AEM Forms
     *
     * This is the DDX file used to create a PDF portfolio:
     * <DDX xmlns="https://ns.adobe.com/DDX/1.0/">
     * <PDF result="portfolio1.pdf">
     * <Portfolio>
     * <Navigator source="myNavigator">
     * <Resource name="navigator/image.xxx" source="myImage.png"/>
     * </Navigator>
     * </Portfolio>
     * <PackageFiles source="dog1"  >
     * <FieldData name="X">72</FieldData>
     * <FieldData name="Y">72</FieldData>
     * <File filename="saint_bernard.jpg" mimetype="image/jpeg"/>
     * </PackageFiles>
     * <PackageFiles source="dog2"  >
     * <FieldData name="X">120</FieldData>
     * <FieldData name="Y">216</FieldData>
     * <File filename="greyhound.pdf"/>
     * </PackageFiles>
     * </PDF>
     * </DDX>
     */
 import com.adobe.livecycle.assembler.client.*;

 import java.util.*;
 import java.io.File;
 import java.io.FileInputStream;
 import com.adobe.idp.Document;
 import com.adobe.idp.dsc.clientsdk.ServiceClientFactory;
 import com.adobe.idp.dsc.clientsdk.ServiceClientFactoryProperties;

 public class CreatePDFPortfolioSOAP {
     public static void main(String[] args) {
         try{
             //Set connection properties required to invoke AEM Forms
             Properties connectionProps = new Properties();
             connectionProps.setProperty(ServiceClientFactoryProperties.DSC_DEFAULT_SOAP_ENDPOINT, "https://[server]:[port]");
             connectionProps.setProperty(ServiceClientFactoryProperties.DSC_TRANSPORT_PROTOCOL,ServiceClientFactoryProperties.DSC_SOAP_PROTOCOL);
             connectionProps.setProperty(ServiceClientFactoryProperties.DSC_SERVER_TYPE, "JBoss");
             connectionProps.setProperty(ServiceClientFactoryProperties.DSC_CREDENTIAL_USERNAME, "administrator");
             connectionProps.setProperty(ServiceClientFactoryProperties.DSC_CREDENTIAL_PASSWORD, "password");

             //Create a ServiceClientFactory instance
             ServiceClientFactory myFactory = ServiceClientFactory.createInstance(connectionProps);

             //Create an AssemblerServiceClient object
             AssemblerServiceClient assemblerClient = new AssemblerServiceClient(myFactory);

             //Create a FileInputStream object based on an existing DDX file
             FileInputStream myDDXFile = new FileInputStream("C:\\Adobe\portfolioAssembly.xml");
             FileInputStream myNavFile = new FileInputStream("C:\\Adobe\AdobeOnImage.nav");

             //Create a Document object based on the DDX file
             Document myDDX = new Document(myDDXFile);
             Document myNav = new Document(myNavFile);

             //Create a Map object to store PDF source documents
             Map<String,Object> input = new HashMap<String, Object>();
             FileInputStream mySourceNavImage = new FileInputStream("C:\\Adobe\myImage.png");
             FileInputStream mySourceDog1 = new FileInputStream("C:\\Adobe\saint_bernard.jpg");
             FileInputStream mySourceDog2 = new FileInputStream("C:\\Adobe\greyhound.pdf");

             //Create a Document object based on the myImage.png source file
             Document myPDFNavImageSource = new Document(mySourceNavImage);

             //Create a Document object based on the MyFirstFile.pdf source file
             Document myPDFDog1Source = new Document(mySourceDog1);

             //Create a Document object based on the MySecondFile.txt source file
             Document myPDFDog2Source = new Document(mySourceDog2);

             //Place two entries into the Map object
             input.put("myNavigator", myNav);
             input.put("myImage.png",myPDFNavImageSource);
             input.put("dog1",myPDFDog1Source);
             input.put("dog2",myPDFDog2Source);

             //Create an AssemblerOptionsSpec object
             AssemblerOptionSpec assemblerSpec = new AssemblerOptionSpec();
             assemblerSpec.setFailOnError(false);

             //Submit the job to Assembler service
             AssemblerResult jobResult = assemblerClient.invokeDDX(myDDX,input,assemblerSpec);
             Map<String,Document> allDocs = jobResult.getDocuments();

             //Retrieve the result PDF document from the Map object
             Document outDoc = null;

             //Iterate through the map object to retrieve the result PDF document
             for (Iterator<Map.Entry<String,Document>> i = allDocs.entrySet().iterator(); i.hasNext();) {
                 // Retrieve the Map object?s value
                 Map.Entry<String,Document> e = (Map.Entry<String,Document>)i.next();

                 //Get the key name as specified in the
                 //DDX document
                 String keyName = (String)e.getKey();
                 if (keyName.equalsIgnoreCase("portfolio1.pdf"))
                 {
                     Object o = e.getValue();
                     outDoc = (Document)o;

                     //Save the result PDF file
                     File myOutFile = new File("C:\\Adobe\AssemblerResultPortfolio.pdf");
                     outDoc.copyToFile(myOutFile);
                 }
             }

         }catch (Exception e) {
             e.printStackTrace();
         }
     }
 }


クイックスタート(SOAP モード):Java API を使用した複数の XDP フラグメントのアセンブリ

次の Java コードの例では、XDP ファイル tuc018_template_flowed.xdptuc018_contact.xdp および* tuc018_patient.xdp* に基づく XDP フラグメントをアセンブルします。 すべてのフラグメントを含むアセンブル済みの XDP ドキュメントは、AssemblerResultXDP.xdp という名前の XDP ファイルとして保存されます。(複数の XDP フラグメントをアセンブルを参照。)

 /*
     * This Java Quick Start uses the SOAP mode and contains the following JAR files
     * in the class path:
     * 1. adobe-assembler-client.jar
     * 2. adobe-livecycle-client.jar
     * 3. adobe-usermanager-client.jar
     * 4. adobe-utilities.jar
     * 5. jboss-client.jar (use a different JAR file if the forms server is not deployed
     * on JBoss)
     * 6. activation.jar (required for SOAP mode)
     * 7. axis.jar (required for SOAP mode)
     * 8. commons-codec-1.3.jar (required for SOAP mode)
     * 9.  commons-collections-3.1.jar  (required for SOAP mode)
     * 10. commons-discovery.jar (required for SOAP mode)
     * 11. commons-logging.jar (required for SOAP mode)
     * 12. dom3-xml-apis-2.5.0.jar (required for SOAP mode)
     * 13. jaxen-1.1-beta-9.jar (required for SOAP mode)
     * 14. jaxrpc.jar (required for SOAP mode)
     * 15. log4j.jar (required for SOAP mode)
     * 16. mail.jar (required for SOAP mode)
     * 17. saaj.jar (required for SOAP mode)
     * 18. wsdl4j.jar (required for SOAP mode)
     * 19. xalan.jar (required for SOAP mode)
     * 20. xbean.jar (required for SOAP mode)
     * 21. xercesImpl.jar (required for SOAP mode)
     *
     * These JAR files are located in the following path:
     * <install directory>/sdk/client-libs/common
     *
     * The adobe-utilities.jar file is located in the following path:
     * <install directory>/sdk/client-libs/jboss
     *
     * The jboss-client.jar file is located in the following path:
     * <install directory>/jboss/bin/client
     *
     * SOAP required JAR files are located in the following path:
     * <install directory>/sdk/client-libs/thirdparty
     *
     * If you want to invoke a remote forms server instance and there is a
     * firewall between the client application and the server, then it is
     * recommended that you use the SOAP mode. When using the SOAP mode,
     * you have to include these additional JAR files
     *
     * For information about the SOAP
     * mode, see "Setting connection properties" in Programming
     * with AEM Forms
     *
     * The following XML represents the DDX document used in this quick start:
     * <?xml version="1.0" encoding="UTF-8"?>
     * <DDX xmlns="https://ns.adobe.com/DDX/1.0/">
     * <XDP result="tuc018result.xdp">
     * <XDP source="tuc018_template_flowed.xdp">
     * <XDPContent insertionPoint="ddx_fragment" source="tuc018_contact.xdp" fragment="subPatientContact" required="false"/>
     * <XDPContent insertionPoint="ddx_fragment" source="tuc018_patient.xdp" fragment="subPatientPhysical" required="false"/>
     * <XDPContent insertionPoint="ddx_fragment" source="tuc018_patient.xdp" fragment="subPatientHealth" required="false"/>
     * </XDP>
     * </XDP>
     * </DDX>
     */
 import com.adobe.livecycle.assembler.client.*;
 import java.util.*;
 import java.io.File;
 import java.io.FileInputStream;
 import com.adobe.idp.Document;
 import com.adobe.idp.dsc.clientsdk.ServiceClientFactory;
 import com.adobe.idp.dsc.clientsdk.ServiceClientFactoryProperties;

 public class AssembleFragmentsSOAP
 {
     public static void main(String[] args) {
         try{
             //Set connection properties required to invoke AEM Forms
             Properties connectionProps = new Properties();
             connectionProps.setProperty(ServiceClientFactoryProperties.DSC_DEFAULT_SOAP_ENDPOINT, "https://[server]:[port]");
             connectionProps.setProperty(ServiceClientFactoryProperties.DSC_TRANSPORT_PROTOCOL,ServiceClientFactoryProperties.DSC_SOAP_PROTOCOL);
             connectionProps.setProperty(ServiceClientFactoryProperties.DSC_SERVER_TYPE, "JBoss");
             connectionProps.setProperty(ServiceClientFactoryProperties.DSC_CREDENTIAL_USERNAME, "administrator");
             connectionProps.setProperty(ServiceClientFactoryProperties.DSC_CREDENTIAL_PASSWORD, "password");

             //Create a ServiceClientFactory instance
             ServiceClientFactory myFactory = ServiceClientFactory.createInstance(connectionProps);

             //Create an AssemblerServiceClient object
             AssemblerServiceClient assemblerClient = new AssemblerServiceClient(myFactory);

             //Create a FileInputStream object based on an existing DDX file
             FileInputStream myDDXFile = new FileInputStream("C:\\Adobe\fragmentDDX.xml");

             //Create a Document object based on the DDX file
             Document myDDX = new Document(myDDXFile);

             //Create a Map object to store the input XDP files
             Map inputs = new HashMap();
             FileInputStream inSource = new FileInputStream("C:\\Adobe\tuc018_template_flowed.xdp");
             FileInputStream inFragment1 = new FileInputStream("C:\\Adobe\tuc018_contact.xdp");
             FileInputStream inFragment2 = new FileInputStream("C:\\Adobe\tuc018_patient.xdp");

             //Create a Document object
             Document myMapSource = new Document(inSource);

             //Create a Document object
             Document inFragment1Doc = new Document(inFragment1);

             //Create a Document object
             Document inFragment2Doc = new Document(inFragment2);

             //Place all of the XDP files into the MAP
             inputs.put("tuc018_template_flowed.xdp",myMapSource);
             inputs.put("tuc018_contact.xdp",inFragment1Doc);
             inputs.put("tuc018_patient.xdp",inFragment2Doc);


             //Create an AssemblerOptionsSpec object
             AssemblerOptionSpec assemblerSpec = new AssemblerOptionSpec();
             assemblerSpec.setFailOnError(false);

             //Submit the job to Assembler service
             AssemblerResult jobResult = assemblerClient.invokeDDX(myDDX,inputs,assemblerSpec);
             java.util.Map allDocs = jobResult.getDocuments();

             //Retrieve the result PDF document from the Map object
             Document outDoc = null;

             //Iterate through the map object to retrieve the result XDP document
             for (Iterator i = allDocs.entrySet().iterator(); i.hasNext();) {
                 // Retrieve the Map object’s value
                 Map.Entry e = (Map.Entry)i.next();

                 //Get the key name as specified in the
                 //DDX document
                 String keyName = (String)e.getKey();
                 if (keyName.equalsIgnoreCase("tuc018result.xdp"))
                 {
                     Object o = e.getValue();
                     outDoc = (Document)o;

                     //Save the result XDP file
                     File myOutFile = new File("C:\\AssemblerResultXDP.xdp");
                     outDoc.copyToFile(myOutFile);
                 }
             }
         }catch (Exception e) {
             e.printStackTrace();
         }
     }
 }

クイックスタート(SOAP モード):Java API を使用した PDF ドキュメントの編集

次のコードの例では、PDFUtility を使用して PDF ドキュメントを編集します。

メモ

PDFUtility は、Acrobat を使用して編集対象としてマークされている PDF のみを編集できます。

/*
 * This Java Quick Start uses the SOAP mode and contains the following JAR files
 * in the class path:
 * 1. adobe-pdfutility-client.jar
 * 2. adobe-livecycle-client.jar
 * 3. adobe-usermanager-client.jar
 * 4. adobe-utilities.jar
 * 5. jboss-client.jar (use a different JAR file if AEM Forms is not deployed
 * on JBoss)
 *
 * These JAR files are located in the following path:
 * <install directory>/Adobe/Adobe_Experience_Manager_forms/sdk/client-libs/common
 *
 * The adobe-utilities.jar file is located in the following path:
 * <install directory>/Adobe/Adobe_Experience_Manager_forms/sdk/client-libs/jboss
 *
 * The jboss-client.jar file is located in the following path:
 * <install directory>/Adobe/Adobe_Experience_Manager_forms/jboss/bin/client
 *
 * If you want to invoke a remote AEM Forms instance and there is a
 * firewall between the client application and AEM Forms, then it is
 * recommended that you use the SOAP mode. When using the SOAP mode,
 * you have to include additional JAR files located in the following
 * path
 * <install directory>/Adobe/Adobe_Experience_Manager_forms/sdk/client-libs/thirdparty
 *
 * For information about the SOAP
 * mode and the additional JAR files that need to be included,
 * see "Setting connection properties" in Programming
 * with AEM Forms
 *
 * For complete details about the location of the AEM Forms JAR files,
 * see "Including AEM Forms library files" in Programming
 * with AEM Forms
 */

import java.util.*;
import com.adobe.livecycle.pdfutility.client.*;
import java.io.*;
import com.adobe.idp.Document;
import com.adobe.idp.dsc.clientsdk.ServiceClientFactory;
import com.adobe.idp.dsc.clientsdk.ServiceClientFactoryProperties;

public class RedactPDF
{
    public static void main(String[] args)
    {
        try
        {
            //Set connection properties required to invoke AEM Forms
            Properties connectionProps = new Properties();
            connectionProps.setProperty(ServiceClientFactoryProperties.DSC_DEFAULT_SOAP_ENDPOINT, "https://[server]:[port]");
            connectionProps.setProperty(ServiceClientFactoryProperties.DSC_TRANSPORT_PROTOCOL,ServiceClientFactoryProperties.DSC_SOAP_PROTOCOL);
            connectionProps.setProperty(ServiceClientFactoryProperties.DSC_SERVER_TYPE, "JBoss");
            connectionProps.setProperty(ServiceClientFactoryProperties.DSC_CREDENTIAL_USERNAME, "administrator");
            connectionProps.setProperty(ServiceClientFactoryProperties.DSC_CREDENTIAL_PASSWORD, "password");

            // Create a ServiceClientFactory object
            ServiceClientFactory myFactory = ServiceClientFactory.createInstance(connectionProps);

            // Create a PDF Utility client
            PDFUtilityServiceClient pdfUt = new PDFUtilityServiceClient(myFactory);

            // Specify a PDF document to Redact
            FileInputStream fileInputStream = new FileInputStream("C:\\Adobe\\RedactMarked.pdf");
            Document inDoc = new Document(fileInputStream);
            RedactionOptionSpec spec = new RedactionOptionSpec();

            // Convert the PDF document to redact
            RedactionResult redRes = pdfUt.redact(inDoc,spec);

            Document redactPDF = redRes.getDocument();

            //Save the returned Document object as an XDP file
            File redactedFile = new File("C:\\Adobe\\Redacted.pdf");
            redactPDF.copyToFile(redactedFile);
        }
        catch (Exception e)
        {
            e.printStackTrace();
        }
    }
}

このページ