Video video

CAUTION
AEM 6.4 has reached the end of extended support and this documentation is no longer updated. For further details, see our technical support periods. Find the supported versions here.

Assets provide for centralized video asset management where you can upload videos directly to Assets for auto-encoding to Dynamic Media Classic. You can also access Dynamic Media Classic videos directly from Assets for page authoring.

Dynamic Media Classic video integration extends the reach of optimized video to all screens (auto device and bandwidth detection).

The Scene7 Video component automatically performs device and bandwidth detection to play the right format and right quality video across desktop, tablets and mobile.

You can include adaptive video sets rather than only single video assets. An adaptive video set is a container for all the video renditions that are required to play back video seamlessly across multiple screens. An Adaptive Video Set groups versions of the same video that are encoded at different bit rates and formats. For example, 400 kbps, 800 kbps, and 1000 kbps. You use an Adaptive Video Set, along with S7 video component, for adaptive video streaming across multiple screen types. For example, desktop, iOS, Android, BlackBerry, and Windows mobile devices.

See Dynamic Media Classic documentation about adaptive video sets for more information.

About FFMPEG and Dynamic Media Classic about-ffmpeg-and-scene

The default video encoding process is based on using the FFMPEG-based integration with video profiles. Therefore, the out-of-the-box DAM ingestion workflow contains the following two ffmpeg-based workflow steps:

  • FFMPEG thumbnails
  • FFMPEG encoding

Enabling and configuring the Dynamic Media Classic integration does not automatically remove or deactivate these two workflow steps from the out-of-the-box DAM ingestion workflow. If you already use FFMPEG-based video encoding in Experience Manager, it is likely that you have FFMPEG installed on your authoring environments. In this case, a new video ingested using DAM would be encoded twice: once from the FFMPEG encoder and once from Dynamic Media Classic integration.

If you have the FFMPEG-based video encoding configured in AEM and FFMPEG installed, you can remove the two FFMPEG workflows from your DAM ingestion workflows.

Supported Formats supported-formats

The following formats are supported for the Scene7 Video component:

  • F4V H.264
  • MP4 H.264

Deciding where to upload your video deciding-where-to-upload-your-video

Deciding where to upload your video assets depends on the following:

  • Do you need a workflow for the video asset?
  • Do you need version control for the video asset?

If the answer is “yes” to either or both of these questions, then upload your video directly to Adobe DAM. If the answer is “no” to both questions, then upload your video directly to Dynamic Media Classic. The workflow for each scenario is described in the next sections.

If you are uploading your video directly to Adobe DAM if-you-are-uploading-your-video-directly-to-adobe-dam

If you need a workflow or versioning for your assets, upload to Adobe DAM first. The following is the recommended workflow:

  1. Upload the video asset to Adobe DAM and automatically encode and publish to Dynamic Media Classic.
  2. In Experience Manager, access video assets in WCM in the Movies tab of the Content Finder.
  3. Author with Scene7 Video or Foundation Video component.

If you are uploading your video to Scene7 if-you-are-uploading-your-video-to-scene

If you do not need a workflow or versioning for your assets, upload your assets to Scene7. The following is the recommended workflow:

  1. In Dynamic Media Classic, set up a scheduled FTP uploading and encoding to Scene7 (system automated).
  2. In Experience Manager, access video assets in WCM in the Scene7 tab of the Content Finder.
  3. Author with the Scene7 Video component.

Configuring Integration with Scene7 Video configuring-integration-with-scene-video

To configure universal presets:

  1. In Cloud Services, navigate to your Scene7 configuration and click Edit.

  2. Select the Video tab.

    chlimage_1-363

    note note
    NOTE
    The Video tab does not appear if the page does not have a cloud configuration.
  3. Select the adaptive video encoding profile, an out-of-the-box single video encoding profile, or a custom video encoding profile.

    note note
    NOTE
    For more information about what the video presets mean, see the Dynamic Media Classic documentation.
    Adobe recommends that you select either both adaptive video sets when configuring the universal presets or select the Adaptive Video Encoding option.
  4. The selected encoding profiles are automatically applied to all videos uploaded to the CQ DAM target folder you set up for this Scene7 cloud configuration. You can set up multiple Scene7 cloud configurations with different target folders to apply different encoding profiles as needed.

Updating viewer and encoding presets updating-viewer-and-encoding-presets

It is necessary to update the viewer and encoding presets for video in Experience Manager if the presets were updated in Scene7. In such cases, navigate to the Scene7 configuration in the cloud configuration and click Update the viewer and encoding presets.

chlimage_1-364

Uploading your master video to Scene7 from Adobe DAM uploading-your-master-video

  1. Navigate to the CQ DAM target folder where you have set up your cloud configuration with Scene7 encoding profiles.

  2. Click Upload to upload master video. Video uploading and encoding is complete after the DAM Update Asset workflow is complete and Publish to Scene7 has a check mark.

    note note
    NOTE
    It takes some time for the video thumbnails to generate.

    Dragging the DAM master video onto the video component accesses all the Scene7 encoded proxy renditions for delivery.

Foundation Video Component versus Scene7 Video Component foundation-video-component-versus-scene-video-component

When using Experience Manager, you have access to both the Video component available in Sites and the Scene7 video component. These components are not interchangeable.

The Scene7 video component only works for Scene7 videos. The foundation component works with videos stored from Experience Manager (using ffmpeg) and Scene7 videos.

The following matrix explains when to use which component:

chlimage_1-365

NOTE
Out-of-the-box, the S7 video component uses the universal video profile. You can, however, obtain the HTML5-based video player in Experience Manager. Simple copy the embed code of the out-of-box HTML5 video player and put it in your Experience Manager page.

Experience Manager Video Component aem-video-component

Even if using the Scene7 video component is recommended for viewing Scene7 videos, use Scene7 videos with the Foundation Video Component, for the sake of completeness.

Experience Manager Video and Scene7 Video comparison aem-video-and-scene-video-comparison

The following table provides a high-level comparison of supported capabilities between the Experience Manager Foundation Video component and the Scene7 Video component:

Experience Manager Foundation Video
Scene7 Video
Approach
HTML5 first approach. Flash is only used for non-HTML5 fallback.
Flash on most desktops. HTML5 is used for mobile and tablets.
Delivery
Progressive
Adaptive Streaming
Tracking
Yes
Yes
Extensibility
Yes
Yes (with HTML5 Viewer SDK API Documentation)
Mobile Video
Yes
Yes

Setting Up setting-up

Creating Video Profiles creating-video-profiles

The various video encodings are created according to the Scene7 encoding presets selected in you Scene7 cloud configuration. For the Foundation Video component to use them, a video profile must be created for each Scene7 encoding preset selected. This method allows the video component to select the DAM renditions accordingly.

NOTE
New video profiles and changes to them must be activated to publish.
  1. In Experience Manager, tap Tools > Configuration Console.

  2. From the Configuration Console navigate to Tools > DAM > Video Profiles in the navigation tree.

  3. Create a Scene7 Video Profile. In the New… drop-down list, select Create Page and then select the Scene7 Video Profile template. Give the new video profile page a name and click Create.

    chlimage_1-366

  4. Edit the new video profile. Select the cloud config first. Then select the same encoding preset as selected in the cloud config.

    chlimage_1-367

    table 0-row-2 1-row-2 2-row-2 3-row-2
    Property Description
    Scene7 Cloud Config The cloud config to use for the encoding presets.
    Scene7 Encoding Preset The encoding preset to map this video profile with.
    HTML5 video type This property lets you set the value of the type property of the HTML5 video source element. This information is not provided by the S7 encoding presets, but required for properly rendering the videos using HTML5 video element. A list for common formats is provided, but can be overwritten for other formats.

    Repeat this step for all encoding presets selected in the cloud config that you want to use in the video component.

Configuring design configuring-design

The Foundation Video component must know about what video profiles to use to build the video sources list. Open the video components design dialog box and configure the components design for using the new video profiles.

NOTE
If you use the Foundation Video component on a mobile page, repeat these steps on the design of the mobile page.
NOTE
Changes made to the design require activation of the design so they can take effect on publish.
  1. Open the Foundation Video component’s design dialog box and change to the Profiles tab. Then delete the out-of-the-box profiles and add the new S7 video profiles. The order of the profile list in the design dialog box defines the order of the video sources element when rendering.
  2. For browsers not supporting HTML5, the video component lets you configure a Flash fallback. Open the video components design dialog box and change to the Flash tab. Configure the Flash Player settings and assign a fallback profile for the Flash Player.

Checklist checklist

  1. Create a S7 Cloud Configuration. Make sure that the video encoding presets are set and the importer is running.
  2. Create a S7 video profile for each video encoding preset selected in the cloud config.
  3. The video profiles must be activated.
  4. Configure the design of the Foundation Video component on your page.
  5. Activate the design after you are done with your design changes.
recommendation-more-help
4452738f-2bdf-4cd4-9b45-905a69d607ad