Campaign simulations campaign-simulations

Campaign Optimization lets you test the efficiency of a campaign plan using simulations. This lets you measure the potential success of a campaign: generated revenue, target volume based on the typology rules applied, etc.

Simulation lets you monitor and compare the impact of deliveries.

Set up a simulation set-up-a-simulation

Caution

Deliveries prepared in Test mode have no impact on each other, for example when assessing a campaign in distributed marketing, or as long as the deliveries aren’t scheduled in the provisional calendar.

This means that pressure and capacity rules are only applied to deliveries in Target estimation and message personalization mode. Deliveries in Estimation and approval of the provisional target mode and in Target evaluation mode are not taken into account.

The delivery mode is chosen in the Typology sub-tab of the delivery properties.

Create a simulation create-a-simulation

To create a simulation, apply the following steps:

  1. Open the Campaigns tab, click the More link within the Create section and select the Simulation option.

  2. Enter the template and the name of the simulation. Click Save to create the simulation.

  3. Click the Edit tab to configure it.

  4. In the Scope tab, specify the deliveries you want to consider for this simulation. To do this, click the Add button and specify the delivery selection mode to take into account.

    You can either select each delivery one by one or sort them by campaign, program or plan.

    note note
    NOTE
    If you select deliveries via a plan, program or campaign, Adobe Campaign can automatically refresh the list of deliveries to take into account whenever a simulation is started. To do this, check the Refresh the selection of deliveries each time the simulation is started option.
    If you don’t do this, any deliveries that are not available in the plan, program, or campaign when the simulation is created will not be taken into account: deliveries added later will be ignored.

  5. Select the elements to include in the simulation scope. If necessary, select multiple elements using the SHIFT and CTRL keys.

    Click Finish to approve the selection.

    You can manually combine selected deliveries and deliveries belonging to plans, programs or campaigns.

    If necessary, you can use a dynamic condition via the Edit the dynamic condition… link.

    Click Save to approve this configuration.

    note note
    NOTE
    Only deliveries whose target has been calculated are taken into account when calculating simulations (statuses: Target ready or Ready to deliver).
  6. In the Calculations tab, select an analysis dimension such as the recipient schema for example.

  7. You can then add expressions.

Execution settings execution-settings

The General tab of the simulation lets you enter execution settings:

  • The Schedule execution for down-time option defers the simulation launch to a less busy time period, based on the chosen level of priority. Simulations use significant database resources, that’s why non-urgent simulations should be scheduled to run at night, for example.
  • The Priority is the level applied to the simulation to delay its triggering.
  • Save SQL queries in the log. SQL logs let you diagnose a simulation if it ends with errors. They can also help you find out why a simulation is too slow. These messages will be visible after the simulation in the SQL logs sub-tab of the Audit tab.

Execute a simulation execute-a-simulation

Start a simulation start-a-simulation

Once the simulation scope is defined, you can execute it.

To do this, open the simulation dashboard and click Start simulation.

Once execution is complete, open the simulation and click the Results tab to view the targets calculated for each delivery.

  1. The Deliveries sub-tab lists all deliveries taken into account by the simulation. It shows two counts:

    • The Initial count is the target as it was calculated during its estimation in the delivery.

    • The Final count is the number of recipients counted after simulation.

      The difference between initial and final counts reflects the application of the various rules or filters configured prior to the simulation.

      To learn more about this calculation, edit the Exclusions sub-tab.

  2. The Exclusions sub-tab lets you view the exclusion break-down.

  3. The Alerts sub-tab groups all alert messages generated during the simulation. Alert messages can be sent in case of capacity overload (if the number of recipients targeted exceeds the set capacity, for instance).

  4. The Exploration of the exclusions sub-tab lets you create a result analysis table. The user needs to indicate variables in the abscissa/ordinates axes.

    For an example of analysis table creation, refer to the end of this section.

View results view-results

Audit audit

The Audit tab lets you monitor simulation execution. The SQL Logs sub-tab is useful for expert users. It lists execution logs in SQL format. These logs are only displayed if the Save SQL queries in the log option has been selected in the General tab before simulation execution.

Explore results explore-results

The Exploration of the exclusions sub-tab lets you analyze the data resulting from a simulation.

Results of a simulation results-of-a-simulation

The indicators in the Log and Results tabs provide a first overview of simulation results. For a more detailed view of results, open the Reports tab.

Reports reports

To analyze the result of a simulation, edit its reports: they show exclusions and causes.

The following reports are provided by default:

  • Detail of simulation exclusions : this report provides a detailed chart of exclusion causes for all concerned deliveries.
  • Simulation summary : this report shows the populations excluded from the simulation throughout the various deliveries.
  • Summary of exclusions linked to the simulation : this report shows a chart of exclusions caused by the simulation along with the applied typology rule and a chart showing the exclusion ratio per rule.

To access reports, click the Reports link of the targeted simulation via its dashboard.

You can also edit reports using the Reports link accessible from the simulation dashboard.

Compare simulations compare-simulations-

Each time a simulation is executed, the result replaces any previous results: you cannot display and compare results from one execution to another.

To compare results, you need to use reports. Indeed, Adobe Campaign lets you save a report history to view it again later. This history is saved throughout the simulations’ life-cycle.

Example:

  1. Create a simulation on a delivery which typology A is applied to.

  2. In the Reports tab, edit one of the available reports, such as Detail of simulation exclusions for example.

  3. In the upper right-hand section of the report, click the icon to create a new history.

  4. Close the simulation and change the configuration of typology A.

  5. Execute the simulation again and compare the result with the one displayed in the report for which a history was created.

    You can save as many report histories as necessary.

Reporting axes reporting-axes

The Calculations tab lets you define reporting axes on the target. Theses axes will be used during result analysis.

NOTE
We recommend defining calculation axes in the simulation templates rather than individually for each simulation.
Simulation templates are saved in the Resources > Templates > Simulation templates folder of Campaign explorer.

Example:

In the example below, we want to create an additional reporting axis based on the recipients’ status (“Customer”, “Prospect” or none).

  1. To define a reporting axis, select the table which contains the information to be processed in the Analysis dimension field. This information is mandatory.

  2. Here, we want to select the Segment field of the recipient table.

  3. The following options are available:

    • Generate target overlap statistics lets you recover all overlap statistics in the simulation report. Overlaps are recipients targeted in at least two deliveries within one simulation.

      note caution
      CAUTION
      Selecting this option considerably increases simulation execution time.
    • Keep the simulation work table lets you keep simulation traces.

      note caution
      CAUTION
      The automatic saving of these tables requires a significant storage capacity: make sure the database is big enough.

When the simulation results are displayed, the information on the selected expression will be displayed in the Overlaps sub-tab.

Delivery target overlaps indicate the targeted recipients in at least two deliveries of a simulation.

NOTE
This sub-tab is only displayed if the Generate target recovery statistics option has been enabled.

The information on reporting axes can be processed in exclusion analysis reports created in the Exploring exclusions sub-tab. Learn more.

recommendation-more-help
cffff7e4-091f-472e-87ca-52087599f99d