Segments allow you to identify subsets of visitors based on characteristics or website interactions. Segments are designed as codified audience insights that you can build for your specific needs, and then verify, edit, and share with other team members or use in other Adobe products and Analytics capabilities.
Segments are based on a Visitor, Visit and Hit level hierarchy using a nested container model. The nested containers allow you to define visitor attributes and actions based on rules between and within the containers. Analytics segments can be built, approved, shared, saved, and run across multiple products and capabilities in the Adobe Experience Cloud. Segments can be generated from a report, built into a dashboard report, or bookmarked for quick access.
You can build and save segments in the Segment Builder, or generate segments from a Fallout report (in [!UICONTROL] Analysis Workspace). You can also employ and extend pre-built segments based on specific rules between nested containers, allowing you to filter results and apply to reports. In addition, segments can be used together as stacked segments.
Segments identify who your visitors are (country, gender, coffee shop), what devices and services they use (browser, search engine, mobile device), where they navigated from (search engine, previous exit page, natural search), plus a lot more.
Segments can be based in the following values:
When building audience segments in the Segment Builder, you define conditions using the AND and OR operators between containers.
This type of segment filters data sets based on characteristics joined using the AND and OR operators.
Sequential segments let you identify visitors based on navigation and page view across your site, providing a segment of defined actions and interactions. Sequential segments help you identify what a visitor likes and what a visitor avoids. When building sequential segments, the THEN operator is used to define and order visitor navigation.
|Visit One||Visit Two||Visit Three|
|In the first visit, the visitor went to the main landing page (A), excluded the campaign page (B), and then viewed the Product page ©.||In the second visit, the visitor again went to the main landing page (A), excluded the campaign page (B), and went again to the Product page ©, and then to a new page (D).||In the third visit, the visitor entered and followed that same path as in the first and second visits, then excluded page F to go directly to a targeted product page (G).|
Sequential segments can be based on the following hit values:
A sequential segment filters data sets based on user actions using the THEN operator.
This video give a short overview of what segment containers are and how to use them: Segment Containers in Adobe Analytics
A Segment sets conditions to filter a visitor based on his or her attributes or interactions with your site. To set conditions in a segment, you set rules to filter visitors based on visitor characteristics and/or navigation traits. To further break down visitor data, you can filter based on specific visits and/or page view hits for each visitor. The Segment Builder provides a simple architecture to build these subsets and apply rules as nested, hierarchical Visitor, Visit, or Hit containers.
The container architecture employed in the Segment Builder defines Visitor as the outermost container, containing overarching data specific for the visitor across visits and page views. A nested Visit container lets you set rules to break down the visitor’s data based on visits, and a nested Hit container lets you break down visitor information based on individual page views. Each container lets you report across a visitor’s history, interactions broken down by visits, or break down individual hits.
The Visitor container includes every visit and page view for visitors within a specified time frame. A segment at the Visitor level returns the page that meets the condition plus all other pages viewed by the visitor (and only constrained by defined date ranges). As the most broadly-defined container, reports generated at the Visitor container level will return page views across all visits and lets you generate a multi-visit analysis. Consequently, the Visitor container is the most susceptible to change based on defined date ranges.
Visitor containers can include values based on a visitor’s overall history:
The Visit container lets you identify page interactions, campaigns, or conversions for a specific web session. The Visit container is the most commonly used container because it captures behaviors for the entire visit session once the rule is met and lets you define which visits you want to include or exclude in building and applying a segment. It can help you answer the question of how many visitors viewed the News and Sports section in the same visit? Or pages that attributed to a successful conversion to a sale?
Visit containers include values based on occurrence per visit:
The Hit container defines which page hits you would like to include or exclude from a segment. It is the most narrow of the containers available to let you identify specific clicks and page view where a condition is true, letting you view a single tracking code, or isolate behavior within a particular section of your site. You may also want to pinpoint a specific value when an action occurs, such as the marketing channel when an order was placed.
Hit containers include values based single page breakdowns:
Merchandising eVars (in context of events)
If you use this container on a value that persists, such as an evar, it will pull in every hit where that value is persisting. In the case of a tracking code that expires after a week, that value could be persisting across multiple visits.
Logic Group container
The Logic Group container allows you to provide a separate container within the segment rules to filter entities not based on hierarchy. For example, you may want to provide a container nested within the segment that filters based on Visitor. This type of logic requires you to break the hierarchy (as you are already have a top-level Visitor container) to filter only for selected visitors. This can be accomplished using the Logic Group container. See Logic Group examples for additional information.
When creating segment containers within other containers, you are in essence creating a segment within a segment. The following logic is used with nested containers:
You can use nesting between containers as well as between rules within a container. Here is what you can nest in each container:
|Container Name||What you can nest inside|
|Visit||Hit container, Events|
|Visitor||Visit container, Hit container, Events|
|Logic Group||Visitor container, Visit container, Hit container|
Include multiple containers within a single definition
Including multiple segments in a new compound segment lets you refine data even further. Dragging two existing segments together acts as an “OR” statement when filtering visitors. All containers in the canvas are reviewed against all data, and any data that matches any of the containers is included in the reporting.
For example, dragging a Visit container where Country = United States with a Visit container where Order = True
Country = United States + Order = True
will build a segment that behaves in this order:
Sequential segmentation employs the same basic containers, including Visitors, Visits, and Hits (including page views or other dimensions) nested hierarchically.
Visitors constitute the highest-order container in sequential segmentation, with Visits contained within the Visitors container, and Hits contained within the Visitors or Visits containers. This container hierarchy must be maintained to build well-ordered sequential segments.
To build sequential segments, containers are nested and sequential logic joined using the THEN operator that requires each container to be true based on the sequence of the visitor.
The only exception to this hierarchy of containers is when using the Logic Group container. The Logic Group container lets you nest a hit within a container without order to capture events and dimensions but outside of a sequential order.
Containers allow you to filter different data differently based on reporting values when breaking down segments and applying them to reports.
Data captured at each level of the Visitor > Visit > Hit containers hierarchy affects how you build your segments. If you take the same segment applied to the same report using the same data set, you will get different values based on the container from which you generate the report. Factors such as container reporting level and persistence of values across hits can mean big changes in your reporting accuracy.
For example, the visitor depicted below visited a site on the first visit, landed on the Home page and then visited three additional pages and converted the visit to a sale. On a separate visit, the visitor landed this time through Product page, then to the Home page, back to the Product page, and then closed the session after looking at Winter Hats. Based in the data captured for each container for the segment, different values will be shown in the report.
The Pages equals Winter Coat segment below is applied to the Pages Report.
Based on the container selected, the report displays different results.
Reporting from the Hit container
When this condition is within a Hit container, then the report lists only pages where Page = Winter Coats is true. Since only one page matches this condition in a container of only one page, only the Winter Coats page is displayed.
Reporting from the Hit container, you can see how reporting from different containers affect overall reporting values. Viewing the segment report, notice that page views are approximately equal to visits (about 2,000 visitors saw duplicate pages within a visit which adds to the total number of page views), and unique visitors are approximately equal to the number of visits (about 2,000 unique visitors visited more than once.)
Regardless of how you view the data—from the Hit, Visit, or Visitor containers—they all have the same number of visitors, 63, 541, in this example. Regardless of how you generate the report, the initial visitor condition—Visitors who viewed the Winter Coats page—remains intact. It is the subset of data from which you are reporting at the different levels.
Reporting from the Visit container
If this same condition is within a Visit container, then the report lists all pages in the visit where Page equals Winter Coats is true. It filters the Winter Coats page, but also captures all other pages in the visit where the condition is true. Because the visitor also visited the Home, Product, and Purchase pages within the visit where the condition was met, these additional pages are listed in the report when reported using Visitor container data.
Showing segment values from the Visit container, you can see that the number of page views has increased significantly. This is because reporting from the Visit container identifies all pages that meet the conditions, plus all other pages viewed in the visit (with all page views captured in each Visit container).
Reporting from the Visitor container
If this same condition is within a Visitor container, the report lists all pages viewed by any visitor where Page equals Winter Coats is true. This means that if a visitor viewed the Winter Coats page, then all of the pages in the Visitor container—including page views in other visits—will be listed. Consequently, pages that don’t match the condition will be listed in the report because the visitor viewed them at a previous time. All pages in the Visitor container will be listed in the report, even if they occurred previously and do not specifically meet the conditions.
Showing segments from the Visitor container, you can see that the Page Views and Visits have increased. This is because from the visitor level, if the visitor visited the Winter Coats page only once (making the condition true), then all other page views and all other visits is captured for that visitor.
In summary, understanding how segmentation works on various data breakdowns is key to interpreting the data it returns.
Every breakdown of segment data has a scope to which it is applied. Most breakdowns are based on Page Views, however, many valuable segments are based on the Visit container, and to a lesser degree the Visitor container. It is important to understand reporting based on the scope of your container.
Based on the Page = Winter Coats segment example used previously, the issues listed below define other aspects of your segment based on how the container data is applied and how the scope of the data should match the segment type.
Segment container based on matching segment rule
Applying the segment container against a natural scope of data brings expected results where the line items match the segment rule.
Page Views at the Visit container level
Many segment rules identify page views per visit. When this occurs, the entire Visitor container is applied, if only a single hit matches the rule. This segment report is especially valuable because page views based on visits provide insight based on page views per visit.
Segment container identifying Hits smaller than Page Views
Using segment with a smaller container than the breakdown scope returns unexpected data. Using a smaller breakdown still pulls in all hits from that scope of data.
Filtering by dimensions that persist across a range of pages, such as a Campaign eVar or a Referring dimension, affects the data collected at the container level and needs to be understood for reporting accuracy.
Segment data can vary based on the persistence of a dimension or applied variable across selected pages. Some dimensions, such as the Page dimension, provide unique values at the page level and are filtered based on data from the Hit container. (See the Reports based on Container Data example). Other dimensions, such as the Referring Domain dimension, persist across multiple pages for a visit. Some dimensions or applied variables, such as Visit Duration, span across a visitor’s entire history.
In contrast to the Page dimension, the Referring Domain value is attached to each page in this visit. For example, the visitor below arrives at the Home page from a referred site. Consequently, all pages within that visit are assigned the same referring domain value.
The Referring Domain equals aol.com segment below is applied to the Pages Report.
In a new visit, the visitor is referred from another site. Consequently, all pages in the new visit are assigned the new referring domain value for each page view.
Reporting from the Hit container
Because all page views within the same visit are assigned the same Referring Domain value, reporting at the Hit container level where Referring Domain = “aol.com” returns all pages listed in the table below.
Showing data from the Hit container, just over 92,000 page views were viewed in over 33,000 Visits by just over 32,000 Visitors. On average, there were three page views in each visit, and almost all visits were by unique visitors.
Reporting from the Visit container
If this same condition is filtered in the Visit container for a Pages report, then all pages in the visit where Referring Domain = “aol.com” is true. Because the value of the referring domain is set at the visit level, reports at the Page View and Visit levels are the same.
In this example, because all pages have the same referring domain value based on the visit, the report from the Visit container level is (almost) the same to the report from the Page View container (with slight offset—98, 234 to 98,248—due to data anomalies).
Reporting from the Visitor container
From the Visitor container, the Page report lists all pages viewed by any visitor where Referring Domain equals “aol.com” is true. Consequently, if a visitor had “aol.com” as a referring domain at anytime in the history (within the defined time period), then all of the pages in the Visitor container—including page views in other visits—will be listed. Even pages that don’t match the primary condition will be listed in the report because these pages are included in the Visitor container. All pages in the Visitor container will be listed in the report, even if they occurred previously and do not specifically meet the conditions.
In a Referring Domain report, Referring Domain = “aol.com” is true in four page views, but Referring Domain = “weather.com” is true in the other pages the visitor hit. From the Visitor container, you get a list of Visitors where “aol.com” is true, but it also gives you pages where the referring domain is “weather.com”, not the value that matched your initial request in the segment.
When you view data from the Visitor container, notice that the page views have increased significantly (from 98,248 to 112, 925). This is because all page views by the visitor—including those with other referring domain values saved to at the Visitor container level—have been listed (as well as the additional visits by that visitor, increasing visits from 33,203 to 43,448).